What will happen when N factor reaches 10 (tomorrow) ?
hash halved ?
Does this mean two times less YAC, or diff will fallow appropriate ?
Topic: [ANN] Yet another GPU miner release! [YAC] - page 12. (Read 53388 times)
Does this thing work at all on NVIDIA / CUDA cards? I keep getting those pesky ADL devices error. Perhaps something I am doing wrong? Maybe someone could get it to work on a CUDA card and tell us how!
yes it does, be sure to get the v5 cl for an extra speed bump and less driver crashes. https://bitcointalksearch.org/topic/m.2518237im getting 48/49 kh on my 560ti with the settings below. hash rate will be much lower after the 25th June when N increases
yacminer --scrypt --worksize 128 --lookup-gap 1 -I 11 --thread-concurrency 2032
using 314.22 drivers since 320.18 are broken for alot of 4xx and 5xx series cards
Does this GPU miner even work?
For limitless (our favorite scammer): It only works if you remember to put "testnet=1" in your yacoin.conf file.
Does this GPU miner even work?
For limitless (our favorite scammer): It only works if you remember to put "testnet=1" in your yacoin.conf file.
Does this GPU miner even work?
Stop bumping the thread then ?
Great work. Let's try to keep this on the low for awhile - last thing we want is for massive GPU farms to rush in and crush profitability
Unfortunately my miner is 10000 miles away as I'm working overseas 
You tried swapping slots?
meh, same problem. Both cards start out at ~ 450 kh/s but card two drops and turns SICK within a minute or two. So annoying!
Yes mate, the 6870 is 0 and set at I 14 so i can watch video and web browse, I have never pushed it but it should reach maybe 200k but the PC would be useless 
Also I think it was mentioned pre7 series use -w 64 not -w 256 like your 7950's will use.
ezo
Also I think it was mentioned pre7 series use -w 64 not -w 256 like your 7950's will use.
ezo
Thanks. I take it the 7950's are cards 1,2 in that setup?
Should also say i can't get 450k using g2. i think it max's out for me and any settings around 400ish
Also clocks are 1100/1250 for both 7950's
ezo
Also clocks are 1100/1250 for both 7950's
ezo
here ya go
yacminer.exe --scrypt -d 0,1,2 -g 1 --lookup-gap 2 -w 64,256,256 --thread-concurrency 8192,20992,20992 -I 14,18,18 -o http://yacp.coinmine.pl:8088 -u name -p pass
ezo
yacminer.exe --scrypt -d 0,1,2 -g 1 --lookup-gap 2 -w 64,256,256 --thread-concurrency 8192,20992,20992 -I 14,18,18 -o http://yacp.coinmine.pl:8088 -u name -p pass
ezo
Ubuntu 64bit. I've tried every combination of settings I can think of. Can you post yours?
Strangely I need to use a TC of 16400 in order to use -g 2 otherwise the threads dont start. I then start with about 400 kh/s on each card but the second slowly gets lower and lower and eventually gets SICK after 5-10 mins. If I revert to a TC of 32800 I can't get it to start with -g 2 so use -g 1, but then the hash rate is much lower. stumped!
Strangely I need to use a TC of 16400 in order to use -g 2 otherwise the threads dont start. I then start with about 400 kh/s on each card but the second slowly gets lower and lower and eventually gets SICK after 5-10 mins. If I revert to a TC of 32800 I can't get it to start with -g 2 so use -g 1, but then the hash rate is much lower. stumped!
hey paulthetafy,
What OS are you using .. 32bit ?
I have 2 7950's running at 453kh/s each without issue, win7pro
ezo
What OS are you using .. 32bit ?
I have 2 7950's running at 453kh/s each without issue, win7pro
ezo
I'm having trouble running this with 2 x 7950's at higher than 12 intensity. each card individually will run at 320 kh/s with I=14, but as soon as I enable both 1 runs at 320 and the other runs at like 100 or just dies. I've tried running two instances of cgminer, 1 for each card, and the same thing happens. Any ideas? Cards have 3GB RAM each and the machine has 8GB. No issue with power either, I have a 900W GOLD PSU and can mine litecoin at 650 kh/s each card no problem at I=20. I'm using the V5 kernel
Quote
yacp is proportional not PPS
Of course it is, it was late @ my time zone, I dunno why I wrote PPS 
Sorry for that!
Still quite low stale rate, compared to other pools.
Does this thing work at all on NVIDIA / CUDA cards? I keep getting those pesky ADL devices error. Perhaps something I am doing wrong? Maybe someone could get it to work on a CUDA card and tell us how!
Hey feeleep any chance we can increase the cookie lifespan? It seems like the yacp site auto logs me out every hour or so.
just mine - dont check the wallet over and over again
I will look in to this later today.
Fix for manual payout bug
https://bitcointalksearch.org/topic/fix-for-manual-payout-bug-for-mmcfe-greedi-version-for-those-who-need-it-239207
manual payment fixed.
Great! Thanks man...
Jump to: