Author

Topic: [ANN][MEOW] Kittehcoin launched ! Come get some MEOW now. U haz it! DOGE sad. - page 153. (Read 246102 times)

sr. member
Activity: 394
Merit: 250
Yes - you're mining Smiley

Now all it takes is patience and luck Cheesy

Thanks, will donate you when I get some Smiley
hero member
Activity: 532
Merit: 500
For anyone who can't seem to get their miner to connect, try using port 9332. I've had this particular problem with Cudaminer for some reason. It appears to be the maximum port number I can use. It always seems to work for me. It becomes kind of obvious if your problem is the port, as cudaminer for me tells me what port it's trying. It will always try 9332 for me if I go above it, which leads me to believe it's a limit imposed somewhere.
sr. member
Activity: 346
Merit: 251
There can be only one!
Yes - you're mining Smiley

Now all it takes is patience and luck Cheesy
sr. member
Activity: 394
Merit: 250
Soloing with client does not work. CGMiner not connecting same as post above.

No, it is not my settings.



It works for me but not on the port mentioned above - 22566. Use different port - 15678 instead. Change it in the wallet .conf file and configure cgminer to use it.


I changed the port and it's like this. Does it mean that it work now?

@zachamo: I tried to not to capitalize Kitteh but it doesn't work Sad
hero member
Activity: 686
Merit: 500
Hey all, is there actually a pool for mining this lost out there?

Thank you meow

http://kit.cipherpool.com
hero member
Activity: 644
Merit: 500
Bcnex - The Ultimate Blockchain Trading Platform
Hey all, is there actually a pool for mining this lost out there?

Thank you meow
legendary
Activity: 1055
Merit: 1002
Blocks 1 — 200,000: 1,000 - 100,000 KittehCoin Reward

Why at pool : block found 2 coin generated 100???


Time Since Last Block   5 hours 28 minutes 12 seconds

What's a fake pool?
member
Activity: 70
Merit: 10
I'm using this conf:

rpcuser=***
rpcpassword=***
rpcallowip=127.0.0.1
rpcport=15678
daemon=1
listen=1
server=1
addnode=198.199.117.221:22566
addnode=82.173.108.213
addnode=84.110.183.206:22566
addnode=5.67.195.255:2256
addnode=151.236.10.190:22566
addnode=198.199.117.221:22566

And this cgminer setup:

cgminer --scrypt -o http://localhost:15678 -u *** -p ***



Getting the error: "Pool 0 slow/down or URL or credentials invalid"

Am I doing something wrong?

Also tried port 22566 but same result.
hero member
Activity: 532
Merit: 500
Is this a joke?  There's already a cat coin with over 1 gigahash of mining power on it and 10+ pools and p2pools.

To make things worse, you even FORKED THE ACTUAL DOGECOIN CLIENT.

The real catcoin had trouble at launch but works fine now.  This kittehcoin thing is just garbage.

Catcoin is garbage.. the client launched with a missing dll, the blockchain was a mess with forks at the beginning, and it's literally just litecoin.. The logos are all litecoin, the launch page is litecoin. Why anyone would support the dev behind that is beyond me.

now now guys.... just admit that both coins are total trash but we are still mining them eh?

Yeah, it's like arguing which one of two turds smell the worse. Lets just admit they both smell bad, and we can quibble about how bad later.

I just don't get why so little thought and planning goes into these coins. Are we really that short of technically-minded people that we end up with such ill-executed launches?
newbie
Activity: 54
Merit: 0
sr. member
Activity: 346
Merit: 251
There can be only one!
The Config file worked. Thank you! Some Kitteh coins will be coming your way.

No wait. CGminer says Im connected accepting blocks but the wallet icon on the bottom right of the wallet says I'm mining at 0 kh/s?

The wallet only shows mining speeds if you're mining via the wallet, which dates back to Bitcoin's original CPU-mining launch. Mining through CGMiner or BFGMiner will show your hash rate in the miner window only. So long as you see a hashrate in your miner, be patient. If you're not patient, try a pool Smiley

I have only learned to solo mine a few days ago. I tried it on a low difficulty coin like luckycoin just so I can see if I'm successfully mining. Which I did mine some coins. The Luckycoin wallet did show a hash rate. Albeit an incorrectly low hash roate. But, it did show a hash rate. So, does my Doge wallet. Not, seeing a hashrate in there kinda makes me worried I'm wasting my time. All I get in CGminer is multiple "Block detected".

Patience! Leave it for a few hours. Block detected is a good thing, it means your miner and wallet are connected. If you see that and a hash rate, you're on the right track.. Though I'd make sure that a pool will accept your shares in case you haven't tested your setup with a pool (i.e. thread concurrency etc).. If you're getting a ton of hardware errors or rejects unrelated to stale etc, that will also prevent you from successfully solo mining.
hero member
Activity: 588
Merit: 500
Will Bitcoin Rise Again to $60,000?
I have to agree this coin beats the shit out of catcoin at least.
newbie
Activity: 28
Merit: 0
Lol.. catcoin is so much better than this terrible creation..

https://bitcointalksearch.org/topic/ann-catcoin-scrypt-meow-380130

MEOW!
newbie
Activity: 42
Merit: 0
The Config file worked. Thank you! Some Kitteh coins will be coming your way.

No wait. CGminer says Im connected accepting blocks but the wallet icon on the bottom right of the wallet says I'm mining at 0 kh/s?

The wallet only shows mining speeds if you're mining via the wallet, which dates back to Bitcoin's original CPU-mining launch. Mining through CGMiner or BFGMiner will show your hash rate in the miner window only. So long as you see a hashrate in your miner, be patient. If you're not patient, try a pool Smiley

I have only learned to solo mine a few days ago. I tried it on a low difficulty coin like luckycoin just so I can see if I'm successfully mining. Which I did mine some coins. The Luckycoin wallet did show a hash rate. Albeit an incorrectly low hash roate. But, it did show a hash rate. So, does my Doge wallet. Not, seeing a hashrate in there kinda makes me worried I'm wasting my time. All I get in CGminer is multiple "Block detected".
hero member
Activity: 686
Merit: 500
Is this a joke?  There's already a cat coin with over 1 gigahash of mining power on it and 10+ pools and p2pools.

To make things worse, you even FORKED THE ACTUAL DOGECOIN CLIENT.

The real catcoin had trouble at launch but works fine now.  This kittehcoin thing is just garbage.

Actually i think that this one is better than catcoin. It was and is a total mess with multiple delayed launch inappropriate network infrastructure, everything was crashing when it was launched. At least this one had a decent launch
hero member
Activity: 602
Merit: 500
Is this a joke?  There's already a cat coin with over 1 gigahash of mining power on it and 10+ pools and p2pools.

To make things worse, you even FORKED THE ACTUAL DOGECOIN CLIENT.

The real catcoin had trouble at launch but works fine now.  This kittehcoin thing is just garbage.

Catcoin is garbage.. the client launched with a missing dll, the blockchain was a mess with forks at the beginning, and it's literally just litecoin.. The logos are all litecoin, the launch page is litecoin. Why anyone would support the dev behind that is beyond me.

now now guys.... just admit that both coins are total trash but we are still mining them eh?
member
Activity: 75
Merit: 10
Soloing with client does not work. CGMiner not connecting same as post above.

No, it is not my settings.



It works for me but not on the port mentioned above - 22566. Use different port - 15678 instead. Change it in the wallet .conf file and configure cgminer to use it.
sr. member
Activity: 346
Merit: 251
There can be only one!
Is this a joke?  There's already a cat coin with over 1 gigahash of mining power on it and 10+ pools and p2pools.

To make things worse, you even FORKED THE ACTUAL DOGECOIN CLIENT.

The real catcoin had trouble at launch but works fine now.  This kittehcoin thing is just garbage.

Catcoin is garbage.. the client launched with a missing dll, the blockchain was a mess with forks at the beginning, and it's literally just litecoin.. The logos are all litecoin, the launch page is litecoin. Why anyone would support the dev behind that is beyond me.
legendary
Activity: 1260
Merit: 1000
Is this a joke?  There's already a cat coin with over 1 gigahash of mining power on it and 10+ pools and p2pools.

To make things worse, you even FORKED THE ACTUAL DOGECOIN CLIENT.

The real catcoin had trouble at launch but works fine now.  This kittehcoin thing is just garbage.
sr. member
Activity: 346
Merit: 251
There can be only one!


This is what I got Sad

Did you relaunch your wallet after adding the .conf?

Is the .conf a .conf.txt? -- right-click and open Properties and make sure it says: Type of File: CONF File (.conf)

EDIT: I see it is a proper .conf -- try removing the capitalization -- kittehcoin
ALSO - please change your RPC Password now that you've posted it here.

http://localhost:22566/   -- I actually use a CONF file in CGMiner and my pool setup looks like this:
"pools" : [
   {
      "url" : "http://localhost:9332/",
      "user" : "REMOVED",
      "pass" : "REMOVED"
   }
]
Jump to: