Topic: [ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us - page 86. (Read 424294 times)
December 03, 2013, 08:02:48 AM
It has become quite an annoyance to mine coins such as Lucky on this pool. Not so much because they hold little value but because Cryptsy is messed up. You can't even sell them fast enough. I've been sitting here clicking on a million sell orders cancelling and trying to sell while the price crashes, and of course autosell doesn't work either. Will switch away from the pool for a while until it makes sense again.
December 03, 2013, 05:40:38 AM
Hey flound, what's the latest news from the home front mean 
Should we change 8888 to 443, or, do we have an additional port, or, what
"Dec 03 12:40 AM Port 80/443 mining is now live! Use port 80 for the Scrypt multiport, and port 443 for the SHA-256 multiport."
Should we change 8888 to 443, or, do we have an additional port, or, what
80 and 443 are for people who are behind firewalls and can't hit the normal ports. A lot of people have requested this feature.
December 03, 2013, 05:20:59 AM
Hey flound, what's the latest news from the home front mean
Should we change 8888 to 443, or, do we have an additional port, or, what
"Dec 03 12:40 AM Port 80/443 mining is now live! Use port 80 for the Scrypt multiport, and port 443 for the SHA-256 multiport."
Should we change 8888 to 443, or, do we have an additional port, or, what
December 03, 2013, 03:51:26 AM
I will compensate the people who were testing the TAG port, let me know how much hash you were throwing ati t.
About 12 hours of 500kh I think. silverysurferIve found using guiminer-scrypt works if/when cgminer doesnt. No idea why just mentioning for anyone else
December 03, 2013, 03:36:15 AM
Nope, Im using BFL 60 GH unit.
can you try setting pool1.us as your backup pool? also can you send me a screenshot and a copy of your config? I don't have any problems at all with my BFL little single.
December 03, 2013, 01:48:21 AM
I am mining sha-256 and it seems like it will mine any currency but BTC. When it switches to BTC, it will stop mining. Does anyone know why this is happening?
If you're mining through slush's stratum proxy (e.g. with ASICMiner blades or cubes), there's a known problem with p2pool (and this gets passed through Multipool) - it won't work with that proxy. Some have suggested that it's best to run with the bfgminer proxy, but I'm not sure if that gets around the p2pool problem since I can't run it more than 6-8 minutes before it declares the devices SICK and restarts them, killing my hashrate. This latter is a known problem with certain devices, wireless, and QoS - it's a tough nut to crack, and I haven't had time to troubleshoot.
December 02, 2013, 08:04:31 PM
Nope, Im using BFL 60 GH unit.
December 02, 2013, 07:55:29 PM
Hi!
I have just started mining on multipool with my asics but I have problems:
I use bfgminer and cgwatcher
my arguments are:
c:\bfgminer\bfgminer.exe -o stratum+tcp://pool1.eu.multipool.us:8888 -u x -p x
but after like 10 mins bfgminer says stratum interrupted then my asics idle...
maybe its at coin change maybe its not at multipool but I had no problem mining btc on other servers with these arguments so far...
So what am I doing wrong?
Thanks!
I have just started mining on multipool with my asics but I have problems:
I use bfgminer and cgwatcher
my arguments are:
c:\bfgminer\bfgminer.exe -o stratum+tcp://pool1.eu.multipool.us:8888 -u x -p x
but after like 10 mins bfgminer says stratum interrupted then my asics idle...
maybe its at coin change maybe its not at multipool but I had no problem mining btc on other servers with these arguments so far...
So what am I doing wrong?
Thanks!
Are you using Bitfuries by any chance?
December 02, 2013, 06:32:09 PM
Hi!
I have just started mining on multipool with my asics but I have problems:
I use bfgminer and cgwatcher
my arguments are:
c:\bfgminer\bfgminer.exe -o stratum+tcp://pool1.eu.multipool.us:8888 -u x -p x
but after like 10 mins bfgminer says stratum interrupted then my asics idle...
maybe its at coin change maybe its not at multipool but I had no problem mining btc on other servers with these arguments so far...
So what am I doing wrong?
Thanks!
I have just started mining on multipool with my asics but I have problems:
I use bfgminer and cgwatcher
my arguments are:
c:\bfgminer\bfgminer.exe -o stratum+tcp://pool1.eu.multipool.us:8888 -u x -p x
but after like 10 mins bfgminer says stratum interrupted then my asics idle...
maybe its at coin change maybe its not at multipool but I had no problem mining btc on other servers with these arguments so far...
So what am I doing wrong?
Thanks!
December 02, 2013, 06:07:43 PM
Cryptsy is saying the LKY issues are fixed
Well it seems that they aren't. I couldn't see any of my deposits since 21th November and I contacted them. This is their response.
Quote
We are still working on the LKY coin wallet issue sorry for the delay. The daemon is still crashing on us we are working very hard on this issue. I know its frustrating. I am closing all the lucky tickets. I know its still not working. When it comes back up any coins you deposited will post. Follow the cryptsy twitter for news on the status of LKY coin.
9 hours ago BigVern tweet this:
BigVern @cryptsy
Luckycoin (LKY) wallet has been fixed and deposits/withdrawals should be working now
It seems that he spoke too soon. My own LKY deposits are still missing.
I had a LKY deposit go through on December 1st however I'm still missing 16 deposits.
December 02, 2013, 12:20:05 PM
Been mining on and off at this pool for 7 months now, this thing seems to happen every now and then. Mining will still work but site will be unresponsive for the day, assuming until it's restarted.
If I remember correctly, all deposits/rewards will resume as normal + any missed during downtime once it's back up. No worries guys.
If I remember correctly, all deposits/rewards will resume as normal + any missed during downtime once it's back up. No worries guys.
December 02, 2013, 10:10:45 AM
Is there something going on with the website? I am having a lot of problems loading the site, and none of my active miners are showing up as active in the list etc... I just checked all my miners they are connected to the pool and they are all submitting shares just curious if its the front end that is under attack or what is going on.
Same here. Front end is having problems but miners are still running. 
December 02, 2013, 08:37:31 AM
Is there something going on with the website? I am having a lot of problems loading the site, and none of my active miners are showing up as active in the list etc... I just checked all my miners they are connected to the pool and they are all submitting shares just curious if its the front end that is under attack or what is going on.
December 01, 2013, 10:16:39 AM
Cryptsy is saying the LKY issues are fixed
Well it seems that they aren't. I couldn't see any of my deposits since 21th November and I contacted them. This is their response.
Quote
We are still working on the LKY coin wallet issue sorry for the delay. The daemon is still crashing on us we are working very hard on this issue. I know its frustrating. I am closing all the lucky tickets. I know its still not working. When it comes back up any coins you deposited will post. Follow the cryptsy twitter for news on the status of LKY coin.
9 hours ago BigVern tweet this:
BigVern @cryptsy
Luckycoin (LKY) wallet has been fixed and deposits/withdrawals should be working now
It seems that he spoke too soon. My own LKY deposits are still missing.
December 01, 2013, 09:03:25 AM
PXC Nov 30 6:21 PM Pu712rQ9iHJe7zizLtT22CmXCRSWVJmjzR 5.02373200
PXC Nov 30 5:10 PM Pu712rQ9iHJe7zizLtT22CmXCRSWVJmjzR 5.17456100
Edit :
Solved by waiting 3 days. Cryptsy is just way overloaded. It showed up eventually.. some of my deposits are taking over 8 hours and its not just me..be warned.
December 01, 2013, 07:57:41 AM
Cryptsy is saying the LKY issues are fixed
Well it seems that they aren't. I couldn't see any of my deposits since 21th November and I contacted them. This is their response.
Quote
We are still working on the LKY coin wallet issue sorry for the delay. The daemon is still crashing on us we are working very hard on this issue. I know its frustrating. I am closing all the lucky tickets. I know its still not working. When it comes back up any coins you deposited will post. Follow the cryptsy twitter for news on the status of LKY coin.
December 01, 2013, 06:57:09 AM
Hi, I'm sorry to bump my own earlier thread (November 30, 2013, 12:35:22 PM), but I'm still having the same problem and haven't been able to figure it out.
I'll post a new larger output from cudaminer to illustrate my problem once again.
It used to be a few of these time-outs but I could mine just fine, but they seems to have increased in the past week or so to the point now where you see nothing happens.
I use the same software and parameters for other pools and they work with absolutely no problem, instant connect and good work done.
My hashrate on multipool usually lie above 330KH/s and my worker is set to difficulty 64. When starting out mining here, the only time I used to see such messages was just as multipool switched coins and I might see a couple of time-out hickups.
I believe I'm using the latest cudaminer version and I've made no serious change to my system lately that I can think of.
I've also tried different workers with different difficulties but to no avail.
Any help here would be appreciated, since right now I'm getting nowhere and I'd love to get back in. Thanks.
I'll post a new larger output from cudaminer to illustrate my problem once again.
Code:
cudaminer.exe -H 1 -d 0,1 -i 1,0 -l 32x6,32x3
-C 0,2 -m 1,1 -o stratum+tcp://pool1.eu.multipool.us:7777 -u myUser.myWorker -p xxx
*** CudaMiner for nVidia GPUs by Christian Buchner ***
This is version 2013-11-20 (alpha)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013 Christian Buchner
My donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
[2013-12-01 12:09:43] 2 miner threads started, using 'scrypt' algorithm.
[2013-12-01 12:09:43] Starting Stratum on stratum+tcp://pool1.eu.multipool.us:77
77
[2013-12-01 12:09:58] stratum_recv_line failed
[2013-12-01 12:09:58] ...retry after 15 seconds
[2013-12-01 12:10:43] stratum_subscribe timed out
[2013-12-01 12:10:43] ...retry after 15 seconds
[2013-12-01 12:11:28] stratum_subscribe timed out
[2013-12-01 12:11:28] ...retry after 15 seconds
[2013-12-01 12:12:13] stratum_subscribe timed out
[2013-12-01 12:12:13] ...retry after 15 seconds
[2013-12-01 12:12:58] stratum_subscribe timed out
[2013-12-01 12:12:58] ...retry after 15 seconds
[2013-12-01 12:13:33] stratum_recv_line failed
[2013-12-01 12:13:33] ...retry after 15 seconds
[2013-12-01 12:14:08] stratum_recv_line failed
[2013-12-01 12:14:08] ...retry after 15 seconds
[2013-12-01 12:14:53] stratum_subscribe timed out
[2013-12-01 12:14:53] ...retry after 15 seconds
[2013-12-01 12:15:38] stratum_subscribe timed out
[2013-12-01 12:15:38] ...retry after 15 seconds
[2013-12-01 12:16:13] stratum_recv_line failed
[2013-12-01 12:16:13] ...retry after 15 seconds
[2013-12-01 12:17:11] Stratum detected new block
[2013-12-01 12:17:12] GPU #0: GeForce GTX 590 with compute capability 2.0
[2013-12-01 12:17:12] GPU #1: GeForce GTX 590 with compute capability 2.0
[2013-12-01 12:17:12] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 1
[2013-12-01 12:17:12] GPU #1: interactive: 0, tex-cache: 2D, single-alloc: 1
[2013-12-01 12:17:12] GPU #0: using launch configuration F32x6
[2013-12-01 12:17:12] GPU #1: using launch configuration F32x3
[2013-12-01 12:17:12] GPU #1: GeForce GTX 590, 6144 hashes, 9.99 khash/s
[2013-12-01 12:17:12] GPU #0: GeForce GTX 590, 6144 hashes, 9.91 khash/s
[2013-12-01 12:17:16] GPU #0: GeForce GTX 590, 595968 hashes, 169.11 khash/s
[2013-12-01 12:17:17] GPU #1: GeForce GTX 590, 602112 hashes, 121.68 khash/s
[2013-12-01 12:18:15] GPU #0: GeForce GTX 590, 10149888 hashes, 173.01 khash/s
[2013-12-01 12:18:17] GPU #1: GeForce GTX 590, 7302144 hashes, 123.44 khash/s
[2013-12-01 12:19:11] Stratum connection timed out
[2013-12-01 12:19:11] Disconnecting stratum connection...
[2013-12-01 12:19:11] Stratum connection interrupted
[2013-12-01 12:19:11] GPU #0: GeForce GTX 590, 9768960 hashes, 172.49 khash/s
[2013-12-01 12:19:11] GPU #1: GeForce GTX 590, 6767616 hashes, 123.55 khash/s
[2013-12-01 12:19:41] stratum_subscribe timed out
[2013-12-01 12:19:41] ...retry after 15 seconds
[2013-12-01 12:20:27] stratum_subscribe timed out
[2013-12-01 12:20:27] ...retry after 15 seconds
[2013-12-01 12:21:12] stratum_subscribe timed out
[2013-12-01 12:21:12] ...retry after 15 seconds
[2013-12-01 12:21:42] stratum_recv_line failed
[2013-12-01 12:21:42] ...retry after 15 seconds
[2013-12-01 12:22:27] stratum_subscribe timed out
[2013-12-01 12:22:27] ...retry after 15 seconds
[2013-12-01 12:23:02] stratum_recv_line failed
[2013-12-01 12:23:02] ...retry after 15 seconds
[2013-12-01 12:23:47] stratum_subscribe timed out
[2013-12-01 12:23:47] ...retry after 15 seconds
[2013-12-01 12:24:32] stratum_subscribe timed out
[2013-12-01 12:24:32] ...retry after 15 seconds
[2013-12-01 12:25:17] stratum_subscribe timed out
[2013-12-01 12:25:17] ...retry after 15 seconds
[2013-12-01 12:25:49] stratum_recv_line failed
[2013-12-01 12:25:49] ...retry after 15 seconds
[2013-12-01 12:26:24] stratum_recv_line failed
[2013-12-01 12:26:24] ...retry after 15 seconds
[2013-12-01 12:26:59] stratum_recv_line failed
[2013-12-01 12:26:59] ...retry after 15 seconds
[2013-12-01 12:27:44] stratum_subscribe timed out
[2013-12-01 12:27:44] ...retry after 15 seconds
[2013-12-01 12:28:29] stratum_subscribe timed out
[2013-12-01 12:28:29] ...retry after 15 seconds
[2013-12-01 12:29:14] stratum_subscribe timed out
[2013-12-01 12:29:14] ...retry after 15 seconds
[2013-12-01 12:30:30] Stratum detected new block
[2013-12-01 12:31:42] GPU #1: GeForce GTX 590, 7415808 hashes, 103.03 khash/s
[2013-12-01 12:31:55] GPU #0: GeForce GTX 590, 8939520 hashes, 106.27 khash/s
[2013-12-01 12:32:19] accepted: 1/1 (100.00%), 209.31 khash/s (yay!!!)
[2013-12-01 12:32:33] GPU #1: GeForce GTX 590, 6183936 hashes, 123.46 khash/s
[2013-12-01 12:32:33] GPU #0: GeForce GTX 590, 6377472 hashes, 167.36 khash/s
[2013-12-01 12:34:19] stratum_recv_line failed
[2013-12-01 12:34:19] Disconnecting stratum connection...
[2013-12-01 12:34:19] Stratum connection interrupted
[2013-12-01 12:34:49] stratum_subscribe timed out
[2013-12-01 12:34:49] ...retry after 15 seconds
[2013-12-01 12:35:34] stratum_subscribe timed out
[2013-12-01 12:35:34] ...retry after 15 seconds
[2013-12-01 12:36:09] stratum_recv_line failed
[2013-12-01 12:36:09] ...retry after 15 seconds
[2013-12-01 12:36:51] Stratum detected new block
[2013-12-01 12:37:06] stratum_recv_line failed
[2013-12-01 12:37:06] Disconnecting stratum connection...
[2013-12-01 12:37:06] Stratum connection interrupted
[2013-12-01 12:37:06] GPU #1: GeForce GTX 590, 1781760 hashes, 123.27 khash/s
[2013-12-01 12:37:06] GPU #0: GeForce GTX 590, 2721792 hashes, 178.18 khash/s
[2013-12-01 12:37:31] Stratum detected new block
[2013-12-01 12:38:31] GPU #1: GeForce GTX 590, 7397376 hashes, 123.60 khash/s
[2013-12-01 12:38:32] GPU #0: GeForce GTX 590, 10690560 hashes, 176.36 khash/s
[2013-12-01 12:39:31] Stratum connection timed out
[2013-12-01 12:39:31] Disconnecting stratum connection...
[2013-12-01 12:39:31] Stratum connection interrupted
[2013-12-01 12:39:31] GPU #1: GeForce GTX 590, 7366656 hashes, 122.50 khash/s
[2013-12-01 12:39:31] GPU #0: GeForce GTX 590, 9627648 hashes, 162.20 khash/s
[2013-12-01 12:40:01] stratum_subscribe timed out
[2013-12-01 12:40:01] ...retry after 15 seconds
[2013-12-01 12:40:46] stratum_subscribe timed out
[2013-12-01 12:40:46] ...retry after 15 seconds
It used to be a few of these time-outs but I could mine just fine, but they seems to have increased in the past week or so to the point now where you see nothing happens.
I use the same software and parameters for other pools and they work with absolutely no problem, instant connect and good work done.
My hashrate on multipool usually lie above 330KH/s and my worker is set to difficulty 64. When starting out mining here, the only time I used to see such messages was just as multipool switched coins and I might see a couple of time-out hickups.
I believe I'm using the latest cudaminer version and I've made no serious change to my system lately that I can think of.
I've also tried different workers with different difficulties but to no avail.
Any help here would be appreciated, since right now I'm getting nowhere and I'd love to get back in. Thanks.
December 01, 2013, 02:18:14 AM
Cryptsy is saying the LKY issues are fixed
If I really Lucky I can buy ganja with my Cryptsy Points
December 01, 2013, 02:12:26 AM
Cryptsy is saying the LKY issues are fixed
December 01, 2013, 01:51:45 AM
Looks like we were on a bad fork of TAG. The client was updated from when I had originally downloaded it. I thought I did a git pull before compiling on the new server but apparently this was not the case.
That's the nature of the beast. It's happened to everyone before and it'll happen again
Whenever I see a coin at the top of CoinWarz claiming 8,000% profitability it seems there's sure to be a fork involved.
Jump to: