Pages:
Author

Topic: [ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster - page 22. (Read 102477 times)

newbie
Activity: 71
Merit: 0


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

How could you make it working under PimP...
I'm trying already 2 hours with no results...
Which ver of PiMP are you using?
Did u put it in a separate folder or did u overwrite the sgminer w the modded one?
Please help me!  Cry

do this: https://bitcointalksearch.org/topic/m.6871459
download the 64bit version of this modded sgminer and upload with sftp to your pimp rig,
put it on its own folder. done. no difficulties...

using latest pimp, 1.4.2-amd-13.12

EDIT:
Results for my 2nd rig done with 6x 280x toxics



Im open to suggestions for improvments...thanks.
Take lower fans and clock GPU 1200/1500 because u have locked voltage on 1256mv . Wath on temps Wink
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

How could you make it working under PimP...
I'm trying already 2 hours with no results...
Which ver of PiMP are you using?
Did u put it in a separate folder or did u overwrite the sgminer w the modded one?
Please help me!  Cry

do this: https://bitcointalksearch.org/topic/m.6871459
download the 64bit version of this modded sgminer and upload with sftp to your pimp rig,
put it on its own folder. done. no difficulties...

using latest pimp, 1.4.2-amd-13.12

EDIT:
Results for my 2nd rig done with 6x 280x toxics



Im open to suggestions for improvments...thanks.
Bad, very bad. At those temps running 100% fan speed is a sure way to kill the fan or wear it out fast, killing the card from overheating.
full member
Activity: 253
Merit: 100


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

How could you make it working under PimP...
I'm trying already 2 hours with no results...
Which ver of PiMP are you using?
Did u put it in a separate folder or did u overwrite the sgminer w the modded one?
Please help me!  Cry

do this: https://bitcointalksearch.org/topic/m.6871459
download the 64bit version of this modded sgminer and upload with sftp to your pimp rig,
put it on its own folder. done. no difficulties...

using latest pimp, 1.4.2-amd-13.12

EDIT:
Results for my 2nd rig done with 6x 280x toxics



Im open to suggestions for improvments...thanks.

Ok, it's clear... i'll try and let u know... Thank u a lot! Smiley
hero member
Activity: 742
Merit: 500


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

How could you make it working under PimP...
I'm trying already 2 hours with no results...
Which ver of PiMP are you using?
Did u put it in a separate folder or did u overwrite the sgminer w the modded one?
Please help me!  Cry

do this: https://bitcointalksearch.org/topic/m.6871459
download the 64bit version of this modded sgminer and upload with sftp to your pimp rig,
put it on its own folder. done. no difficulties...

using latest pimp, 1.4.2-amd-13.12

EDIT:
Results for my 2nd rig done with 6x 280x toxics



Im open to suggestions for improvments...thanks.
full member
Activity: 253
Merit: 100


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

How could you make it working under PimP...
I'm trying already 2 hours with no results...
Which ver of PiMP are you using?
Did u put it in a separate folder or did u overwrite the sgminer w the modded one?
Please help me!  Cry
member
Activity: 99
Merit: 10
failover not working? cant set backup pool?

"sgminer: --failover-only: unrecognized option"
newbie
Activity: 71
Merit: 0
full member
Activity: 138
Merit: 100
Actually, I'm quite grateful to the author of this miner. I was wondering why many people mine X11 coins despite poor profitability. I suspected that some of them with large GPU factories have much more efficient miner than the current official version of SGminer, and they have been simply quietly mining with it, while more efficient X11 AMD GPU miner was unavailable to the public. Author of this build was the first to release 40% (!!!!!!!) faster version of SGminer to the public, even though at ~2% fee. His program answers a lot of questions concerning mysteriously low X11 profitability, and makes available much higher X11 profitability to the general public, not only to the chosen few.

P.S.: My 7950s hashrate gone from 2.0 Mhs to 2.8Mhs. A 40% increase exactly!
hero member
Activity: 742
Merit: 500


thats damn nice result sir Smiley

any suggestion about the Intensity ? its that OK to be 19 or should i put 20 ?


also, in my other rigs, i got 6x 280x toxics, which will be the best settings for them ?
hero member
Activity: 742
Merit: 500
dont have any problems with energy bills sir Cheesy thanks for your suggestion Shocked gonna report the result asap.
newbie
Activity: 71
Merit: 0


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...
My god put that card on lover voltage or set GPU on 1180/1500 for better hash rate if u cant set lover voltage on cards
This is my 2x280x cards , 1st card on water and 2nd card Asus DC2T 1150/1500 1175mv
hero member
Activity: 685
Merit: 500
Which card is that and what clock you use ?

3x 290, 1030/1300

Can we implement this P>C>0 sequence in the starting .bat file?
hero member
Activity: 742
Merit: 500


Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...
hero member
Activity: 518
Merit: 500
I would not mind to donate 2% IF everything works BUT tbh right now this is just one big scam, i left 1 of my miners to test that shit and for 5 hours it mined 90% of the time in the "donation pool". So fuck off ...

Now i will try the failover strategy, if that works - great. If not, lets hope some a bit more honest developer will take off what this guy did and do something nice.
member
Activity: 117
Merit: 10
Some of my friends doesn`t understand internal menu.

"Pool" - "Change management strategy" to 0 (Failover) - is pressing "P", "C", 0 (zero) and Enter.
And once again Enter to see home screen.


THIS WORKS - SIMPLE way to disable donation

You can disable the donation simply by changing the pool management strategy to failover.  He removed the menu item for failover, but it still works.  I just assumed it wouldn't work since the menu item was gone and didn't try it.
legendary
Activity: 3248
Merit: 1070
Which card is that and what clock you use ?

seems a 290, this miner should do 40-50% more hash, 290 was at 2.7mh/s before
newbie
Activity: 3
Merit: 0
same problem not showing the temperature on my card can anyoane give a a link whit a good compiled miner for darkcoin?
https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795
i had managed to compile it on bamt no problem but the temp still not showing up.

Can you explain how you compiled on BAMT? I am running BAMT 1.6 and 1.6.2.  I am unable to get this to run on any of my rigs.


Thanks!
newbie
Activity: 71
Merit: 0
Which card is that and what clock you use ?
hero member
Activity: 685
Merit: 500

...

Disabling donate pool: just set "Pool" - "Change management strategy" to 0 (Failover). Works fine for me.

Works for me too. Thanks!

newbie
Activity: 71
Merit: 0
Go to settings/profiles tab in cgwatcher and  go to manage profiles/miner path than u browso to your bat file ...
Pages:
Jump to: