Can some one please donate me a Spare coupon of S1 or S2 if you have?
username on bitmaintech: mozilafirefox
Topic: ANTMINER S2 Discussion and Support Thread - page 52. (Read 355730 times)
New price for AntMiner S2 1 TH/s Kit: 2167 USD each one, shipping cost included.
Hi, its possible to play with money transfer / credit card? Or just BTC? thanks
You can pay with BTC here:
https://www.bitmaintech.com/productDetail.htm?pid=00020140531103056245Ox3OpK1E0664
You didnt understand me hehe
What i want, is to pay using credit card or money transfer, because i dont have that amount in BTC.
So i want to know if they just can be bought using BTC, or if its possible to pay also with credit card or money transfer
thanks
Contact [email protected]
Are any more coupons coming?
Oh sorry 
New price for AntMiner S2 1 TH/s Kit: 2167 USD each one, shipping cost included.
Hi, its possible to play with money transfer / credit card? Or just BTC? thanks
You can pay with BTC here:
https://www.bitmaintech.com/productDetail.htm?pid=00020140531103056245Ox3OpK1E0664
You didnt understand me hehe
What i want, is to pay using credit card or money transfer, because i dont have that amount in BTC.
So i want to know if they just can be bought using BTC, or if its possible to pay also with credit card or money transfer
thanks
New price for AntMiner S2 1 TH/s Kit: 2167 USD each one, shipping cost included.
Hi, its possible to play with money transfer / credit card? Or just BTC? thanks
You can pay with BTC here:
https://www.bitmaintech.com/productDetail.htm?pid=00020140531103056245Ox3OpK1E0664
New price for AntMiner S2 1 TH/s Kit: 2167 USD each one, shipping cost included.
Hi, its possible to play with money transfer / credit card? Or just BTC? thanks
IMPORTANT NOTICE
BITMAIN creats a new Facebook page https://www.facebook.com/Bitmain. Antminer, which is valid on June 9th, 2014.
While the old one www.facebook.com/pages/Bitmain/602849346422962 is invalid, because it was attacked by bitmaintechs.com, which is scam.
Please note and remind your friends or clients when you read this information, to be carefull to choose the true channels to place the orders.
BITMAIN
June 9th 2014
BITMAIN creats a new Facebook page https://www.facebook.com/Bitmain. Antminer, which is valid on June 9th, 2014.
While the old one www.facebook.com/pages/Bitmain/602849346422962 is invalid, because it was attacked by bitmaintechs.com, which is scam.
Please note and remind your friends or clients when you read this information, to be carefull to choose the true channels to place the orders.
BITMAIN
June 9th 2014
If you own the other page you can just clean it up yourself, but it looks more like your account got hacked as the posts for bitmaintechs is from the same userid as the legitimate posts.
IMPORTANT NOTICE
BITMAIN creats a new Facebook page https://www.facebook.com/Bitmain. Antminer, which is valid on June 9th, 2014. This page is controlled by BITMAIN.
While the old one www.facebook.com/pages/Bitmain/602849346422962 is invalid, because it was attacked by bitmaintechs.com, which is scam.
Please note and remind your friends or clients when you read this information, to be carefull to choose the true channels to place the orders.
https://www.facebook.com/Bitmaintech.Antminer is reactivated on June 10th, after Facebook finished the investigation of attack, any news will be issued on this page.
BITMAIN
June 10th 2014
BITMAIN creats a new Facebook page https://www.facebook.com/Bitmain. Antminer, which is valid on June 9th, 2014. This page is controlled by BITMAIN.
Please note and remind your friends or clients when you read this information, to be carefull to choose the true channels to place the orders.
https://www.facebook.com/Bitmaintech.Antminer is reactivated on June 10th, after Facebook finished the investigation of attack, any news will be issued on this page.
BITMAIN
June 10th 2014
Hello,
I have 2 S2 coupons :
2014-06-07 23:56:00~2014-06-21 23:56:00
Sell 0,1 BTC per coupon
My BTC address : 1TEtjfCUeRmLGFyqA9bWJUhjHveKfhD7A
Please PM me your Bitmain login for donate.
I have 2 S2 coupons :
2014-06-07 23:56:00~2014-06-21 23:56:00
Sell 0,1 BTC per coupon
My BTC address : 1TEtjfCUeRmLGFyqA9bWJUhjHveKfhD7A
Please PM me your Bitmain login for donate.
New price for AntMiner S2 1 TH/s Kit: 2167 USD each one, shipping cost included.
New price for AntMiner S2 1 TH/s Miner Batch 4: 2319 USD each one, shipping cost included.
Well, so I am having issues with my B2 unit 
From time to it usually powered off itself and I have to open, take the click out and put back in and everything works ok for some time. But today it happens like every 20 minutes or so.
All the asics works ok and I have no further problem, so I guess my power supply is dead yes ?
Does Bitmain provides a new one ?
I had a similar issue and it was the power supply slowly giving up. Eventually I could only run 9 cards or it wouldn't run for more than 2 seconds. Bitmain did replace the PSU though and it's been running fine ever since. From time to it usually powered off itself and I have to open, take the click out and put back in and everything works ok for some time. But today it happens like every 20 minutes or so.
All the asics works ok and I have no further problem, so I guess my power supply is dead yes ?
Does Bitmain provides a new one ?
I've run into an issue with one of my S2 miners.
Since yesterday the miner was down and now when I turn it on it boots but doesn't finish the boot sequence I think.
The red light on the frontpanel stays on and the fans will keep running at 100% and not able to ping the miner, although it does have link state and see some activity on port.
Any one run into this problem and know how to resolve it?
Tried:
- Moving out all modules ( except one )
- Moving out all modules
- Removing and inserting the controller board again.
- Removing the beagle bone from the controller board and add it again.
- Tried reset
- Dump img on the sd card again.
- Dump img on a new sd card.
- Swap out power supply with new one.
I am a bit at a loss here as none if it helped and miner is unusable.
Personally I think its due to the controller board but sure.
Anyone have some advice?
Thanks
What you are seeing there is usually a SD card problem, if the image is corrupt. Sometimes it helps to just eject the card and reinsert it and reboot the miner, otherwise you'll have to burn a new image. I see that you have already done that, but when I've had the blank screen in the past, it's been the SD card as it can't boot. If you see text on the lcd screen then your problem is with your network, but it sounds like your fans are running full speed and it's not booting which would mean it's the sd card. Since yesterday the miner was down and now when I turn it on it boots but doesn't finish the boot sequence I think.
The red light on the frontpanel stays on and the fans will keep running at 100% and not able to ping the miner, although it does have link state and see some activity on port.
Any one run into this problem and know how to resolve it?
Tried:
- Moving out all modules ( except one )
- Moving out all modules
- Removing and inserting the controller board again.
- Removing the beagle bone from the controller board and add it again.
- Tried reset
- Dump img on the sd card again.
- Dump img on a new sd card.
- Swap out power supply with new one.
I am a bit at a loss here as none if it helped and miner is unusable.
Personally I think its due to the controller board but sure.
Anyone have some advice?
Thanks
Spot the TERRAhash
Spot the discrepancy between 9 blades & 10 blades??
hey bitmain, while your waiting for the DOA board u sent me to return before sending me out another board, how about explaining whats up with B4??
i paid for a TH....
so far thats 0/3.
Spot the discrepancy between 9 blades & 10 blades??
hey bitmain, while your waiting for the DOA board u sent me to return before sending me out another board, how about explaining whats up with B4??
i paid for a TH....
so far thats 0/3.
I have one S2 coupon left (good until June 12th) if anyone would like to use it for a small donation of 0.03BTC
PM if interested.
PM if interested.
Thanks chaps
2 weeks ago £263
Around £240-£250
Anyone received an S2 in the UK recently? Can you give me a heads up on what I need to pay UPS?
Thanks
Thanks
Jump to: