ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 336.

UfoRia

full member

Activity: 182

Merit: 100

Quote from: padrino on September 30, 2015, 11:11:27 AM

Based on how I read the above there is no delay until October 10th, 10 days after the estimated shipping window.

You think they are going to ship out all of the remaining batch one miners in less than two days since they don't come back from vacation until the 9th?

Ufo

padrino

legendary

Activity: 1428

Merit: 1000

https://www.bitworks.io

Quote from: UfoRia on September 30, 2015, 11:00:47 AM

I wonder what they will provide for the delay since they go back to work on the 9th and this was the batch one statement...

Batch one scheduled shipping date is in late September of 21~30. If shipping out 10 days later than the scheduled one, it won't be considered as delay.

Ufo

Based on how I read the above there is no delay until October 10th, 10 days after the estimated shipping window.

UfoRia

full member

Activity: 182

Merit: 100

I wonder what they will provide for the delay since they go back to work on the 9th and this was the batch one statement...

Batch one scheduled shipping date is in late September of 21~30. If shipping out 10 days later than the scheduled one, it won't be considered as delay.

Ufo

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

Quote from: AriesIV10 on September 30, 2015, 10:36:13 AM

Thanks for mediating! I do appreciate your comments throughout this forum.

Sure, happy to oblige!

Cheers

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: beffje on September 30, 2015, 10:32:50 AM

Quote from: dmwardjr on September 30, 2015, 10:15:28 AM

Quote from: AriesIV10 on September 30, 2015, 09:51:51 AM

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards? I would like to run some experiments with some of my S5s. I was referred to J4bberwock but there is not any response to pm.

Hi AriesIV10,

The quote below is from J4bberwock in his breakout board thread. You can click on the heading above the quote to get to his thread. He has a LOT going on at the moment. However, the answer to your question is below.

Quote from: J4bberwock on September 29, 2015, 08:07:11 PM

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

Thanks dmwardjr,

We will just have to be patient.

Thanks for mediating! I do appreciate your comments throughout this forum.

beffje

member

Activity: 71

Merit: 10

Quote from: dmwardjr on September 30, 2015, 10:15:28 AM

Quote from: AriesIV10 on September 30, 2015, 09:51:51 AM

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards? I would like to run some experiments with some of my S5s. I was referred to J4bberwock but there is not any response to pm.

Hi AriesIV10,

The quote below is from J4bberwock in his breakout board thread. You can click on the heading above the quote to get to his thread. He has a LOT going on at the moment. However, the answer to your question is below.

Quote from: J4bberwock on September 29, 2015, 08:07:11 PM

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

Thanks dmwardjr,

We will just have to be patient.

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

Quote from: AriesIV10 on September 30, 2015, 09:51:51 AM

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards? I would like to run some experiments with some of my S5s. I was referred to J4bberwock but there is not any response to pm.

Hi AriesIV10,

The quote below is from J4bberwock in his breakout board thread. You can click on the heading above the quote to get to his thread. He has a LOT going on at the moment. However, the answer to your question is below.

Quote from: J4bberwock on September 29, 2015, 08:07:11 PM

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards? I would like to run some experiments with some of my S5s. I was referred to J4bberwock but there is not any response to pm.

aurel57

legendary

Activity: 1232

Merit: 1000

Quote from: AriesIV10 on September 30, 2015, 09:38:31 AM

Quote from: torepia on September 30, 2015, 07:40:05 AM

Does anyone know if they've shipped any S7's today?

My next shipment is 9/9 is still "Unshipped"

Mine was 8th unshipped also

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: torepia on September 30, 2015, 07:40:05 AM

Does anyone know if they've shipped any S7's today?

My next shipment is 9/9 is still "Unshipped"

aurel57

legendary

Activity: 1232

Merit: 1000

Quote from: edonkey on September 30, 2015, 08:45:10 AM

Quote from: torepia on September 30, 2015, 07:40:05 AM

Does anyone know if they've shipped any S7's today?

I emailed them last night and the answer I got this morning was that they're "having a holiday now."

No shipping for me until the 9th (if then). Very irritating since I bought within the first 5 days.

This sucks...I take it then a whole bunch of us will be later than 10 days past today which will be "late"

beffje

member

Activity: 71

Merit: 10

Quote from: edonkey on September 30, 2015, 09:02:14 AM

Quote from: beffje on September 30, 2015, 03:23:09 AM

I will get a new batt for my multimeter and do some measureing for you guys.

My S7 is running stable at 4.8 at 600. Power at wall 1180. Using a RM1000 and a RM650

Mine only got to 4.7 at stock speeds. But at 612, it averages 4.8 and is very stable. After increasing the frequency the HW errors went up a bit from 0.0222% to 0.0386%, but that's still fine.

Overall this unit is very stable and predictable. I just wish they could have shipped the rest of units that I ordered before getting plastered on baiju for a week

I am at a HW of 0.005% at stock speed. Running for 48 hours now temps are 42-41-46

edonkey

legendary

Activity: 1150

Merit: 1004

Quote from: beffje on September 30, 2015, 03:23:09 AM

I will get a new batt for my multimeter and do some measureing for you guys.

My S7 is running stable at 4.8 at 600. Power at wall 1180. Using a RM1000 and a RM650

Mine only got to 4.7 at stock speeds. But at 612, it averages 4.8 and is very stable. After increasing the frequency the HW errors went up a bit from 0.0222% to 0.0386%, but that's still fine.

Overall this unit is very stable and predictable. I just wish they could have shipped the rest of units that I ordered before getting plastered on baiju for a week

UfoRia

full member

Activity: 182

Merit: 100

*cough* *cough* *cough*

I was saying this yesterday, so I took screenshots this morning to prove it. While I was preparing them someone above mentioned the same thing. So, we check back in TEN days once they go BACK to work to start working on the orders sequentially...

Re: BITMAIN Order Details
Wed, Sep 30, 2015 at 8:35 AM

Sorry, we're having holiday now and miners will be shipped out after we're back to work around Oct. 9.
Please wait for update.
Thanks

On Sep 29, 2015, at 11:20 PM, wrote:

Not a chance mine will ship before Chinese Golden Week 2015?

Dr Charles

legendary

Activity: 1708

Merit: 1080

Quote from: edonkey on September 30, 2015, 08:45:10 AM

Quote from: torepia on September 30, 2015, 07:40:05 AM

Does anyone know if they've shipped any S7's today?

I emailed them last night and the answer I got this morning was that they're "having a holiday now."

No shipping for me until the 9th (if then). Very irritating since I bought within the first 5 days.

\

Hey at least you got a response. I ordered on day 2 of ordering and still no shipment or response to ticket.

edonkey

legendary

Activity: 1150

Merit: 1004

Quote from: torepia on September 30, 2015, 07:40:05 AM

Does anyone know if they've shipped any S7's today?

I emailed them last night and the answer I got this morning was that they're "having a holiday now."

No shipping for me until the 9th (if then). Very irritating since I bought within the first 5 days.

Dr Charles

legendary

Activity: 1708

Merit: 1080

Quote from: Biodom on September 30, 2015, 08:40:55 AM

Quote from: ZymurBits on September 30, 2015, 08:01:55 AM

Quote from: UfoRia on September 30, 2015, 07:31:31 AM

Sold out of US power adapters for the R1, I was going to buy five and leave them around the house and work. How can you run out of the adapter.....

What kind of plug comes standard on the R1? Are there other places to buy the adapter?

I am afraid that nothing comes standard (no plug included as default) as there is no description of any electrical connection apart from the plug.

Which honestly doesnt make sense to me... it should come standard with a plug regardless what country it is designed for and then they should provide the option to purchase the adapter for countries that dont match

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

They haven't shipped any of mine still and as usual no response to tickets.

I'm done with bitmaintech. Wish I could dispute the damn payment. Angry

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: ZymurBits on September 30, 2015, 08:01:55 AM

Quote from: UfoRia on September 30, 2015, 07:31:31 AM

Sold out of US power adapters for the R1, I was going to buy five and leave them around the house and work. How can you run out of the adapter.....

What kind of plug comes standard on the R1? Are there other places to buy the adapter?

I am afraid that nothing comes standard (no plug included as default) as there is no description of any electrical connection apart from the plug.

ZymurBits

member

Activity: 89

Merit: 10

Quote from: UfoRia on September 30, 2015, 08:09:56 AM

You can't buy the router(s) unless you buy one cable....

Are you sure? It lets me add to cart without the adapter.

Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 336. (Read 528055 times)