Topic: [Предзаказ] Bitfury ASIC 65nm - page 247. (Read 823369 times)

Какая примерно общая мощность заказанных устройств у метабанка?

Создал файлик в EXEL с калькулятором майнинга.

А кто-то уже запустил 80+ Тх на чипах Битфури  Cry https://ghash.io/

Форум читают не только те, о ком ты вообще не знаешь, но и те, о ком ты даже не подозреваешь.

Это не первый батч авалонов, не смешите народ, за такое бабло уважающий себя жопу не оторвет. Может кто там заказывал по 50 устройств разве что, тому может и имеет смысл с охраной приезжать.

Ты - Москвич?

Жгу у буржуев

bitfury вроде писал, что он за децентрализацию. Уже ~16% сети контролирует один битфури лично  

Я покупал устройства по 120 GH/s в которых содержится минимум 24 чипа. Просто метабанк меняет первый пост при любом желании.
Изначально в первом посте было что-то такое:

ухахха, про меня что-то пишут буржуи
кто умеет читать по нерусски, напишете чё они там сказали про меня?

Hello again,

We called Metabank and a little information is below, but first some ...

Comments to our questions from the 65nm Metabank Russian thread (paraphrased):
-  It seems at least a few people in the 65nm Russian thread liked our questions.
- One said, come on Timur, answer the questions, don't wait around for Vasily (Mu3) to do it
- A few sarcastic remarks:  "yeah, let's hope they will certify the devices everywhere possible, it'd take time exactly till october"; "otherwise "an uncle vasya the local electrician" [russian fig. of speech, like "average joe the electrician"] can show up like: "hey, you're mining without a certificate!"
- SectorZero is expecting the system to be 'frying' like the avalon his friend has in the basement.

My observation:
- If the chips really are clocked at 2.9GH, expect these systems to produce a *LOT* of heat (If 5 blades * 8 chips = 40 chips, producing ~100 degrees Celsius worth of heat). Whatever cooling they provide is going to be critical to keeping the system stable. In any case, be prepared for dealing with all the heat these boxes will generate.

Metabank Call Aug 24, 2013:
- The devices will NOT have any certifications (i.e. UL, CE, RoHS, etc) because this would delay availability by at least 1 month. So if you are unlucky be prepared for some potential problems at your boarders. We can try to label them as computer engineering prototypes or something of the sort - if you have some good advice for this, we're listening. If they ship with standard PC power supplies, we won't have to worry about UL certification as they should already be certified. As for RoHS, that's an option you select when you get PCBs printed. Typically costs about 15-20% more, but ensures there is no lead in the product. They still allow non-RoHS PCBs to be printed even in North America, but only for prototypes. For consumer products it is required to have RoHS compliance, although not all PCB manufacturers really enforce that. The CE certification would be much trickier.  Just to be clear, this will not be our responsibility if customs doesn't clear it because of lack of certifications. On the flip side, Avalon's boxes were not CE certified, and the vast majority of them cleared customs without issues, we think primarily because they looked like computer boxes.
- They are on target to start "unloading" at the end of this month or first week of September. (I will have to get clarification on what "unloading" is meant here exactly, but I assume it means unloading into customer's hands).
- Not all devices at once, but first orders get devices first. (Note that we didn't start offering our service until Metabank was selling units for several days, I'd have to go back and check, but the bulk of our orders were even several days after that).
- The device box is made of plastic, not plexiglass
- The picking up of boxes at Metabank location is still an option, but the address will not be provided until the units are ready.
- There will most likely not be any packaging provided for people picking up the boxes. (FYI, we {BitCentury} have already started discussions on how to provide proper packaging, boxes etc for our customers, so we'll do what we can here to try to make sure the units arrive in one piece to you. The good news is that both Tom and I have experience with properly packing and shipping expensive circuit boards from past jobs).
- As for the technical questions the guy answering the phone could not answer them, but we mentioned that others want information too and to please post technical information in the forum. He said they will do, but who knows. They also asked us to email our technical questions to them before (we've done it at least 2 or 3 times) and never get a reply - both in English or Russian.

А где было сказано, про то, что это устройство в 120 ? и то, что МБанк планирует делать устройства производительностью в 120 ? и реализовывать их по 1 ? Сами себе навыдумывали, теперь страдаете, хотя страдаете явно по другим причинам.

Планируемая плата устройства будет содержать минимум 24 чипа (120 Gh/s), из чего получается минимальная сумма предзаказа - 2160$.
Тут же ясно все сказано ? Нет ? Или тут сказано, что минимальный заказ - 1 устройство ?

Я покупал устройства по 120 GH/s в которых содержится минимум 24 чипа. Просто метабанк меняет первый пост при любом желании.
Изначально в первом посте было что-то такое:

каких? Мы покупали гигахеши

Планируемая плата устройства будет содержать минимум 24 чипа (120 Gh/s), из чего получается минимальная сумма предзаказа - 2160$.