BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip - page 12.

klintay

legendary

Activity: 1775

Merit: 1032

Value will be measured in sats

Quote from: kilo17 on February 24, 2016, 02:27:38 AM

Quote from: klintay on February 24, 2016, 01:45:26 AM

Quote from: gt_addict on February 23, 2016, 07:07:56 AM

Anyone got one for sale? I'm based in the UK. Thanks.

We ship to UK, check out our site:

https://www.eyeboot.com

Use the normal shipping option ($6 usd) it is be E-Express Airmail so fully traceable and express once it enters UK.

Klintay, i bought your 49 port hub and received it today-- love it

thanks, glad you like it. It is the big daddy of USB hubs

Quote from: gt_addict on February 27, 2016, 07:26:40 AM

Quote from: klintay on February 24, 2016, 01:45:26 AM

Quote from: gt_addict on February 23, 2016, 07:07:56 AM

Anyone got one for sale? I'm based in the UK. Thanks.

We ship to UK, check out our site:

https://www.eyeboot.com

Use the normal shipping option ($6 usd) it is be E-Express Airmail so fully traceable and express once it enters UK.

Have you got an U3's in stock? Or will you be getting any?

Sorry they are out of stock. Bitmain has stopped manufacturing that model...will have to wait for the U4 now Wink

gt_addict

hero member

Activity: 2492

Merit: 621

Quote from: klintay on February 24, 2016, 01:45:26 AM

Quote from: gt_addict on February 23, 2016, 07:07:56 AM

Anyone got one for sale? I'm based in the UK. Thanks.

We ship to UK, check out our site:

https://www.eyeboot.com

Use the normal shipping option ($6 usd) it is be E-Express Airmail so fully traceable and express once it enters UK.

Have you got an U3's in stock? Or will you be getting any?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: vyckal on February 26, 2016, 05:24:04 AM

I'm beginners mining, I buy AntRouter - R1, or will be able to USB port join 10 port usb hub with 2 Bi Fury 4 +GH/s and 1 BitFury Red Fury ASIC 2.2 GH/s

Neither of them will ROI so just make for sure you realize that before spending money on it. On the stick miners you mention they are to high. Go for a compac instead it is a good amount faster.

But these are all more lotto miners is what I consider them.

vyckal

newbie

Activity: 27

Merit: 0

I'm beginners mining, I buy AntRouter - R1, or will be able to USB port join 10 port usb hub with 2 Bi Fury 4 +GH/s and 1 BitFury Red Fury ASIC 2.2 GH/s

kilo17

legendary

Activity: 980

Merit: 1001

aka "whocares"

Quote from: klintay on February 24, 2016, 01:45:26 AM

Quote from: gt_addict on February 23, 2016, 07:07:56 AM

Anyone got one for sale? I'm based in the UK. Thanks.

We ship to UK, check out our site:

https://www.eyeboot.com

Use the normal shipping option ($6 usd) it is be E-Express Airmail so fully traceable and express once it enters UK.

Klintay, i bought your 49 port hub and received it today-- love it

klintay

legendary

Activity: 1775

Merit: 1032

Value will be measured in sats

Quote from: gt_addict on February 23, 2016, 07:07:56 AM

Anyone got one for sale? I'm based in the UK. Thanks.

We ship to UK, check out our site:

https://www.eyeboot.com

Use the normal shipping option ($6 usd) it is be E-Express Airmail so fully traceable and express once it enters UK.

gt_addict

hero member

Activity: 2492

Merit: 621

Anyone got one for sale? I'm based in the UK. Thanks.

jlauzon

member

Activity: 108

Merit: 10

Quote from: aarons6 on February 19, 2016, 02:01:42 AM

Quote from: jlauzon on February 19, 2016, 12:56:52 AM

I just received several R1s from HolyBitcoin (great service, fast shipping BTW... holybitcoin.com <-- recommend)

I was able to set everything up on the unit I'm keeping for myself with no problems, except I can't get it to run my Gekko (compac) USB miners. I have 4 in total, but I'm trying to just get one working through a non-powered hub.

The compac stick was recognized for a short time...it flashed as it should when working and showed up in the R1 U3 Status page. It even created a worker on both antpool and f2pool, but then it just stops after a minute or two. I tried it at the default frequency on R1 and at max the firmware allows (218.5?). Adding power to the hub did nothing.

I see others are using the R1 as a compac stick controller...

1) You think CrazyGuy's firmware update might just make the problem go away?
2) Can anyone using R1/Gekko weigh in with any ideas as to why I get recognition, then "gone"?

Thanks!

send you a pm that will help you out.

Thanks man; very much appreciated.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: jlauzon on February 19, 2016, 12:56:52 AM

I just received several R1s from HolyBitcoin (great service, fast shipping BTW... holybitcoin.com <-- recommend)

I was able to set everything up on the unit I'm keeping for myself with no problems, except I can't get it to run my Gekko (compac) USB miners. I have 4 in total, but I'm trying to just get one working through a non-powered hub.

The compac stick was recognized for a short time...it flashed as it should when working and showed up in the R1 U3 Status page. It even created a worker on both antpool and f2pool, but then it just stops after a minute or two. I tried it at the default frequency on R1 and at max the firmware allows (218.5?). Adding power to the hub did nothing.

I see others are using the R1 as a compac stick controller...

1) You think CrazyGuy's firmware update might just make the problem go away?
2) Can anyone using R1/Gekko weigh in with any ideas as to why I get recognition, then "gone"?

Thanks!

send you a pm that will help you out.

jlauzon

member

Activity: 108

Merit: 10

I just received several R1s from HolyBitcoin (great service, fast shipping BTW... holybitcoin.com <-- recommend)

I was able to set everything up on the unit I'm keeping for myself with no problems, except I can't get it to run my Gekko (compac) USB miners. I have 4 in total, but I'm trying to just get one working through a non-powered hub.

The compac stick was recognized for a short time...it flashed as it should when working and showed up in the R1 U3 Status page. It even created a worker on both antpool and f2pool, but then it just stops after a minute or two. I tried it at the default frequency on R1 and at max the firmware allows (218.5?). Adding power to the hub did nothing.

I see others are using the R1 as a compac stick controller...

1) You think CrazyGuy's firmware update might just make the problem go away?
2) Can anyone using R1/Gekko weigh in with any ideas as to why I get recognition, then "gone"?

Thanks!

RichBC

hero member

Activity: 588

Merit: 500

R1 Batch 2 is back up for sale after the Holiday, now at the expected $49. I hope that anyone that wanted one picked one up at the $39 pre Holiday Sale price?

Rich

bitsolutions

sr. member

Activity: 261

Merit: 257

Quote from: RichBC on February 17, 2016, 06:07:56 AM

Thanks for the info. So is this just something that Bitmain have set up for the Antrouter R1 Pool or is general for all of Antpool? What is the ClasicCoin activation threshold and is there a way of knowing how close we are getting?

Rich

Only public Antpool server I've seen with ClassicCoin seems to be the Antrouter one. ClassicCoin threshold is 750 of the last 1000 blocks so that means about 70% hash power could trigger activation due to variance, this is in contrast to the 950/1000 threshold typically used for Bitcoin soft forks(lower thresholds are bad since they greatly increase the chance of there being two viable forks).

RichBC

hero member

Activity: 588

Merit: 500

Quote from: bitsolutions on February 17, 2016, 04:37:54 AM

Quote from: RichBC on February 17, 2016, 03:20:59 AM

Can you spell out what this means if someone did mine a Block and any thoughts on why Bitmain have things set up in this way?

Rich

For the moment it probably won't really matter a whole lot but since the ClassicCoin altcoin has different consensus rules from Bitcoin it could potentially end up on the wrong side of a fork if it had its activation trigger. The way the ClassicCoin altcoin is programmed it could easily create two viable chains if it hits its activation threshold. Those who don't want to change to the altcoin should make sure they are following the Bitcoin chain and not the ClassicCoin chain by mining on pools that have Bitcoin nodes and not ClassicCoin nodes. As long as the ClassicCoin's activation doesn't trigger you will still be able to spend the coins as Bitcoins however.

Thanks for the info. So is this just something that Bitmain have set up for the Antrouter R1 Pool or is general for all of Antpool? What is the ClasicCoin activation threshold and is there a way of knowing how close we are getting?

Rich

klintay

legendary

Activity: 1775

Merit: 1032

Value will be measured in sats

We just received our Bitmain Antrouter R1 units, available here:

http://www.eyeboot.com/ASIC-Miners/antrouter-r1

$61 usd with shipping

For those who already pre-ordered with us, shipping starts tomorrow

bitsolutions

sr. member

Activity: 261

Merit: 257

Quote from: RichBC on February 17, 2016, 03:20:59 AM

Can you spell out what this means if someone did mine a Block and any thoughts on why Bitmain have things set up in this way?

Rich

For the moment it probably won't really matter a whole lot but since the ClassicCoin altcoin has different consensus rules from Bitcoin it could potentially end up on the wrong side of a fork if it had its activation trigger. The way the ClassicCoin altcoin is programmed it could easily create two viable chains if it hits its activation threshold. Those who don't want to change to the altcoin should make sure they are following the Bitcoin chain and not the ClassicCoin chain by mining on pools that have Bitcoin nodes and not ClassicCoin nodes. As long as the ClassicCoin's activation doesn't trigger you will still be able to spend the coins as Bitcoins however.

RichBC

hero member

Activity: 588

Merit: 500

Quote from: bitsolutions on February 17, 2016, 03:13:46 AM

Quote from: RichBC on February 17, 2016, 02:39:20 AM

Not quite understanding what this means? So if you have a "standard" R1 you think you are Solo Mining Bitcoin and if you hit a block you will get 25 Coins?

You are saying that you are actually Mining ClassiCoin? So what will happen if you hit a block, wiil you be paid 25 Bitcoin? Surely the chances of hitting a ClassicCoin Block are greater than Bitcoin? Or am I misunderstanding what is going on here?

Rich

I'm saying it's mining on a node that doesn't fully follow Bitcoin's consensus rules and could potentially mine a block on a different chain.

Can you spell out what this means if someone did mine a Block and any thoughts on why Bitmain have things set up in this way?

Rich

bitsolutions

sr. member

Activity: 261

Merit: 257

Quote from: RichBC on February 17, 2016, 02:39:20 AM

Not quite understanding what this means? So if you have a "standard" R1 you think you are Solo Mining Bitcoin and if you hit a block you will get 25 Coins?

You are saying that you are actually Mining ClassiCoin? So what will happen if you hit a block, wiil you be paid 25 Bitcoin? Surely the chances of hitting a ClassicCoin Block are greater than Bitcoin? Or am I misunderstanding what is going on here?

Rich

I'm saying it's mining on a node that doesn't fully follow Bitcoin's consensus rules and could potentially mine a block on a different chain.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: RichBC on February 17, 2016, 02:39:20 AM

Quote from: aarons6 on February 17, 2016, 02:27:52 AM

Quote from: bitsolutions on February 17, 2016, 01:38:19 AM

PSA the default pool on the Antrouter R1 is now mining the altcoin ClassicCoin instead of Bitcoin.
Decoded Stratum Data from antrouter.antpool.com:3333 :

Code:

Block Version:30000000
Coinbase Sig:_Mined by AntPool bj2___l V__Pm_______

the way they set it up you never did solo mine on your own bitcoin address anyway..
they just 'give' you the bitcoin if you personally find a block.. i actually think since the r1 will never mine a block they are taking the pools bitcoin for those accounts..

i actually switched mine to mine peercoin.. you have a better chance of getting a block.

Not quite understanding what this means? So if you have a "standard" R1 you think you are Solo Mining Bitcoin and if you hit a block you will get 25 Coins?

You are saying that you are actually Mining ClassiCoin? So what will happen if you hit a block, wiil you be paid 25 Bitcoin? Surely the chances of hitting a ClassicCoin Block are greater than Bitcoin? Or am I misunderstanding what is going on here?

Rich

im not sure, but to be honest the r1 mining thing was always quite sketchy.. first you were mining on an email address.. and as per bitmains instructions, the email was associated with the r1 on sale.. also they said if you did get a block, they had to email you to verify you bought the r1 from them.. but then since took that down. so who knows..

also, you arent really solo mining.. you are mining on their pool with their username.

RichBC

hero member

Activity: 588

Merit: 500

Quote from: aarons6 on February 17, 2016, 02:27:52 AM

Quote from: bitsolutions on February 17, 2016, 01:38:19 AM

PSA the default pool on the Antrouter R1 is now mining the altcoin ClassicCoin instead of Bitcoin.
Decoded Stratum Data from antrouter.antpool.com:3333 :

Code:

Block Version:30000000
Coinbase Sig:_Mined by AntPool bj2___l V__Pm_______

the way they set it up you never did solo mine on your own bitcoin address anyway..
they just 'give' you the bitcoin if you personally find a block.. i actually think since the r1 will never mine a block they are taking the pools bitcoin for those accounts..

i actually switched mine to mine peercoin.. you have a better chance of getting a block.

Not quite understanding what this means? So if you have a "standard" R1 you think you are Solo Mining Bitcoin and if you hit a block you will get 25 Coins?

You are saying that you are actually Mining ClassiCoin? So what will happen if you hit a block, wiil you be paid 25 Bitcoin? Surely the chances of hitting a ClassicCoin Block are greater than Bitcoin? Or am I misunderstanding what is going on here?

Rich

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: bitsolutions on February 17, 2016, 01:38:19 AM

PSA the default pool on the Antrouter R1 is now mining the altcoin ClassicCoin instead of Bitcoin.
Decoded Stratum Data from antrouter.antpool.com:3333 :

Code:

Block Version:30000000
Coinbase Sig:_Mined by AntPool bj2___l V__Pm_______

the way they set it up you never did solo mine on your own bitcoin address anyway..
they just 'give' you the bitcoin if you personally find a block.. i actually think since the r1 will never mine a block they are taking the pools bitcoin for those accounts..

i actually switched mine to mine peercoin.. you have a better chance of getting a block.

Topic: BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip - page 12. (Read 77656 times)