Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 70. (Read 2145056 times)
So far soo good on my rigs.. Will see for how long. I always had problems with this miner in the past
I just found all my miners offline due to segmentation fault (core dumped) even with a failover pool this is happening again...
This sucks, I almost think it's being triggered on purpose as it only happens right after I fall asleep or leave the miners unattended. I lost like10?+ hours of hashing, fuck.
edit:
OK I figured it out every server and all of nicehash has gone down, my failover server was the nicehash eu server and it looks like it went down with the usa server,
I'll use miningpoolhub.com as my failover now as I know they use cloudflare.
edit_2:
my btcs? my precious btcs?
This sucks, I almost think it's being triggered on purpose as it only happens right after I fall asleep or leave the miners unattended. I lost like
edit:
OK I figured it out every server and all of nicehash has gone down, my failover server was the nicehash eu server and it looks like it went down with the usa server,
I'll use miningpoolhub.com as my failover now as I know they use cloudflare.
edit_2:
my btcs? my precious btcs?
Rig runs fine on the latest version of ether dual miner. But when I run the latest version of cryptonote I get this:
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
I tried setting -h 1024. I also have virtual memory and environment variables set.
Set your VM to a minimum of 4GB for each GPU (prefer 8GB if you have 8GB cards). This miner is very memory heavy on VM though it uses less when running. I have 6 8GB cards in each rig and set the VM to start at 16 and max at 50. Works fine then.
Thank you kindly, this worked. One gpu has low hash rate (~250 h/s vs ~750 h/s for the rest), and not always the same one, which is odd.
Dear Mister (Sir) Claymore,
will there be a chance for a new version (10.3?) so that i can use my bulk of Hd7850/r9 270/hd7790.
It would be very nice!
At the moment the 'Pitcairn' cards throw a lot of errors (miscalculated) and for the bonaire there is no asm anymore in 10.2
So i stuck at 9.7 with most of my cards ;( .
Have a nice day
will there be a chance for a new version (10.3?) so that i can use my bulk of Hd7850/r9 270/hd7790.
It would be very nice!
At the moment the 'Pitcairn' cards throw a lot of errors (miscalculated) and for the bonaire there is no asm anymore in 10.2
So i stuck at 9.7 with most of my cards ;( .
Have a nice day
I'm testing this miner and its using more power than xmr-stack for only ~50h/s more. Anyone else noticed the same?
yeah seeing the same but im using cast xmr , what hash rates are you getting ?
for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
for my underclocked 480 i see 800 h/s 1100 core and 2100 mem
on cast i see like 660 and 730 respectively , but less power use
what arguments to make Cast work on rx570's ?
I'm seeing 800h/s on average using claymore 1080gpu/1950mem @825mv ~60w (gpu-z)
On the 290's I'm seeing 780h/s 1000/1100 89w (gpu-z) on average but with high spikes to 120w
I'm testing this miner and its using more power than xmr-stack for only ~50h/s more. Anyone else noticed the same?
yeah seeing the same but im using cast xmr , what hash rates are you getting ?
for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
for my underclocked 480 i see 800 h/s 1100 core and 2100 mem
on cast i see like 660 and 730 respectively , but less power use
I'm testing this miner and its using more power than xmr-stack for only ~50h/s more. Anyone else noticed the same?
^^^ I'd like to recommend the rx580-8gb for use with this miner.
Agreed. I would prefer to keep the 4gb prices lower and for myself.
Have at 'em the 4gb cards are all crap.
Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool pool.electroneum.space
thanks
thanks
This is the batch file I've been using, with Ver 10.2, on pool.electroneum.space , with any luck MiningPoolHub http://miningpoolhub.com will soon have ETN on there list of coins.
Code:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10
Thank you very much, really appreciate the help.!!!
Rig runs fine on the latest version of ether dual miner. But when I run the latest version of cryptonote I get this:
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
I tried setting -h 1024. I also have virtual memory and environment variables set.
Set your VM to a minimum of 4GB for each GPU (prefer 8GB if you have 8GB cards). This miner is very memory heavy on VM though it uses less when running. I have 6 8GB cards in each rig and set the VM to start at 16 and max at 50. Works fine then.
Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool pool.electroneum.space
thanks
thanks
This is the batch file I've been using, with Ver 10.2, on pool.electroneum.space , with any luck MiningPoolHub http://miningpoolhub.com will soon have ETN on there list of coins.
Code:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10
miner show me only temperature for one card, how can i fix this? in config file nothing unusual, only pool data
GPU0 t=51C fan=42%
XMR: 12/06/17-06:24:26 - SHARE FOUND - (GPU 3)
Share accepted (156 ms)!
XMR: 12/06/17-06:24:32 - SHARE FOUND - (GPU 3)
Share accepted (125 ms)!
XMR: 12/06/17-06:24:40 - New job from xmr-eu1.nanopool.org:14444
XMR - Total Speed: 3334 H/s, Total Shares: 24, Rejected: 0, Time: 00:13
XMR: GPU0 834 H/s, GPU1 834 H/s, GPU2 834 H/s, GPU3 832 H/s
XMR: Stale share found - skip
GPU0 t=50C fan=42%
GPU0 t=51C fan=42%
GPU0 t=51C fan=42%
XMR: 12/06/17-06:24:26 - SHARE FOUND - (GPU 3)
Share accepted (156 ms)!
XMR: 12/06/17-06:24:32 - SHARE FOUND - (GPU 3)
Share accepted (125 ms)!
XMR: 12/06/17-06:24:40 - New job from xmr-eu1.nanopool.org:14444
XMR - Total Speed: 3334 H/s, Total Shares: 24, Rejected: 0, Time: 00:13
XMR: GPU0 834 H/s, GPU1 834 H/s, GPU2 834 H/s, GPU3 832 H/s
XMR: Stale share found - skip
GPU0 t=50C fan=42%
GPU0 t=51C fan=42%
^^^ I'd like to recommend the rx580-8gb for use with this miner.
Agreed. I would prefer to keep the 4gb prices lower and for myself.
^^^ I'd like to recommend the rx580-8gb for use with this miner.
Rig runs fine on the latest version of ether dual miner. But when I run the latest version of cryptonote I get this:
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
I tried setting -h 1024. I also have virtual memory and environment variables set.
Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool pool.electroneum.space
thanks
thanks
same problem and for me
Rig runs fine on the latest version of ether dual miner. But when I run the latest version of cryptonote I get this:
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
08:46:29:818 abc GPU 4, GpuMiner dk2a failed -4
08:46:29:827 bd0 Job changed, drop current round
08:46:29:836 ac0 Job changed, drop current round
08:46:29:855 9c0 GPU 3, GpuMiner dk2a failed -4
08:46:29:897 a30 Job changed, drop current round
08:46:29:904 a28 Job changed, drop current round
08:46:29:927 a28 GPU 3, GpuMiner dk2a failed -4
08:46:29:935 a44 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:945 a30 GPU 3, GpuMiner dk2an0 failed -4
08:46:29:958 a9c GPU 2, GpuMiner dk2a failed -4
08:46:30:149 ac0 GPU 4, GpuMiner dk2a failed -4
anybody help me, that is this error mean? when i run nicehash it run 10.2 also ther is no problem. i also try 10.1, 9.7 such problem . i have 10 rigs and only one have this problem
there is log
12:35:29:406 37c args: -xpool stratum+tcp://xmr-eu.dwarfpool.com:8005 -xwal 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 -xpsw x
12:35:29:408 37c
12:35:29:411 37c ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
12:35:29:413 37c є Claymore's CryptoNote AMD GPU Miner v10.2 Beta є
12:35:29:415 37c ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
12:35:29:417 37c
12:35:29:624 37c XMR: 1 pool is specified
12:35:29:631 37c Main Monero pool is xmr-eu.dwarfpool.com:8005
12:35:31:273 37c OpenCL platform: AMD Accelerated Parallel Processing
12:35:31:277 37c OpenCL initializing...
12:35:31:280 37c driver 10, 0, 2117, 14
12:35:31:282 37c AMD Cards available: 6
12:35:31:284 37c GPU #0: Hawaii, 3072 MB available, 44 compute units
12:35:31:286 37c GPU #0 recognized as Radeon 290X
12:35:31:288 37c card 0, m1 3072, m2 3072 w 352
12:35:31:290 37c 0 m = 2
12:35:31:292 37c GPU #1: Hawaii, 3072 MB available, 44 compute units
12:35:31:295 37c GPU #1 recognized as Radeon 290X
12:35:31:298 37c card 1, m1 3072, m2 3072 w 352
12:35:31:300 37c 1 m = 2
12:35:31:303 37c GPU #2: Hawaii, 3072 MB available, 44 compute units
12:35:31:305 37c GPU #2 recognized as Radeon 290X
12:35:31:307 37c card 2, m1 3072, m2 3072 w 352
12:35:31:310 37c 2 m = 2
12:35:31:313 37c GPU #3: Hawaii, 3072 MB available, 40 compute units
12:35:31:315 37c GPU #3 recognized as Radeon 290
12:35:31:317 37c card 3, m1 3072, m2 3072 w 320
12:35:31:319 37c 3 m = 2
12:35:31:322 37c GPU #4: Hawaii, 3072 MB available, 44 compute units
12:35:31:324 37c GPU #4 recognized as Radeon 290X
12:35:31:327 37c card 4, m1 3072, m2 3072 w 352
12:35:31:330 37c 4 m = 2
12:35:31:332 37c GPU #5: Hawaii, 3072 MB available, 40 compute units
12:35:31:335 37c GPU #5 recognized as Radeon 290
12:35:31:338 37c card 5, m1 3072, m2 3072 w 320
12:35:31:340 37c 5 m = 2
12:35:31:343 37c POOL version
12:35:31:345 37c b141
12:35:31:348 37c Platform: Windows
12:35:31:428 37c start building OpenCL program for GPU 0...
12:35:31:431 37c done
12:35:31:641 37c start building OpenCL program for GPU 1...
12:35:31:660 37c done
12:35:31:874 37c start building OpenCL program for GPU 2...
12:35:31:882 37c done
12:35:32:096 37c start building OpenCL program for GPU 3...
12:35:32:104 37c done
12:35:32:318 37c start building OpenCL program for GPU 4...
12:35:32:336 37c done
12:35:32:548 37c start building OpenCL program for GPU 5...
12:35:32:557 37c done
12:35:32:827 37c GPU #0 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:862 37c GPU #1 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:889 37c GPU #2 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:920 37c GPU #3 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
12:35:32:948 37c GPU #4 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:977 37c GPU #5 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
12:35:32:980 37c Total cards: 6
12:35:45:294 37c Watchdog enabled
12:35:45:302 37c Remote management (READ-ONLY MODE) is enabled on port 3333
12:35:45:312 37c
12:35:45:340 f74 XMR: Stratum - connecting to 'xmr-eu.dwarfpool.com' <79.137.57.106> port 8005 (unsecure)
12:35:45:344 f74 send: {"method": "login", "params": {"login": "449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6", "pass": "x", "agent": "xmr/1.0"}, "id": 1}
12:35:45:348 f74 XMR: Stratum - Connected (xmr-eu.dwarfpool.com:8005) (unsecure)
12:35:45:465 f74 got 303 bytes
12:35:45:472 f74 buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"347476290026679","job":{"blob":"0606e7d099d105ead1111980c112dffa67e22e51b19075d1f254eb096da765eb046b6dc5607bd90 0000000e41d4d3329ddcaf21517bbf998b4b7f81f95199f9ed1fdd47c7620a3bfcf61c60d","job_id":"322775170905515","target":"dc460300"},"status":"OK"}}
12:35:45:479 f74 parse packet: 302
12:35:45:484 f74 new buf size: 0
12:35:45:698 3d0 GPU 5, GpuMiner k1a failed -36
12:35:45:701 2ec GPU 2, GpuMiner k1a failed -36
12:35:45:704 99c GPU 4, GpuMiner k1a failed -36
12:35:45:707 89c GPU 3, GpuMiner k1a failed -36
12:35:45:711 9a4 GPU 1, GpuMiner k1a failed -36
12:35:45:714 eb4 GPU 0, GpuMiner k1a failed -36
12:35:45:718 bfc GPU 5, GpuMiner k1a failed -36
12:35:45:721 e8c GPU 2, GpuMiner k1a failed -36
12:35:45:724 ff0 GPU 4, GpuMiner k1a failed -36
12:35:45:729 f58 GPU 3, GpuMiner k1a failed -36
12:35:45:733 8c4 GPU 1, GpuMiner k1a failed -36
12:35:45:736 c38 GPU 0, GpuMiner k1a failed -36
12:35:45:740 790 GPU 5, GpuMiner k1a failed -36
12:35:45:744 3f0 GPU 2, GpuMiner k1a failed -36
12:35:45:747 ae4 GPU 4, GpuMiner k1a failed -36
12:35:45:751 e7c GPU 3, GpuMiner k1a failed -36
12:35:45:754 a40 GPU 1, GpuMiner k1a failed -36
12:35:45:757 3a8 GPU 0, GpuMiner k1a failed -36
12:35:45:762 470 GPU 5, GpuMiner k1a failed -36
12:35:45:766 5ac GPU 2, GpuMiner k1a failed -36
12:35:45:769 7ac GPU 4, GpuMiner k1a failed -36
12:35:45:772 c44 GPU 3, GpuMiner k1a failed -36
12:35:45:776 794 GPU 1, GpuMiner k1a failed -36
12:35:45:780 c3c GPU 0, GpuMiner k1a failed -36
there is log
12:35:29:406 37c args: -xpool stratum+tcp://xmr-eu.dwarfpool.com:8005 -xwal 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 -xpsw x
12:35:29:408 37c
12:35:29:411 37c ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
12:35:29:413 37c є Claymore's CryptoNote AMD GPU Miner v10.2 Beta є
12:35:29:415 37c ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
12:35:29:417 37c
12:35:29:624 37c XMR: 1 pool is specified
12:35:29:631 37c Main Monero pool is xmr-eu.dwarfpool.com:8005
12:35:31:273 37c OpenCL platform: AMD Accelerated Parallel Processing
12:35:31:277 37c OpenCL initializing...
12:35:31:280 37c driver 10, 0, 2117, 14
12:35:31:282 37c AMD Cards available: 6
12:35:31:284 37c GPU #0: Hawaii, 3072 MB available, 44 compute units
12:35:31:286 37c GPU #0 recognized as Radeon 290X
12:35:31:288 37c card 0, m1 3072, m2 3072 w 352
12:35:31:290 37c 0 m = 2
12:35:31:292 37c GPU #1: Hawaii, 3072 MB available, 44 compute units
12:35:31:295 37c GPU #1 recognized as Radeon 290X
12:35:31:298 37c card 1, m1 3072, m2 3072 w 352
12:35:31:300 37c 1 m = 2
12:35:31:303 37c GPU #2: Hawaii, 3072 MB available, 44 compute units
12:35:31:305 37c GPU #2 recognized as Radeon 290X
12:35:31:307 37c card 2, m1 3072, m2 3072 w 352
12:35:31:310 37c 2 m = 2
12:35:31:313 37c GPU #3: Hawaii, 3072 MB available, 40 compute units
12:35:31:315 37c GPU #3 recognized as Radeon 290
12:35:31:317 37c card 3, m1 3072, m2 3072 w 320
12:35:31:319 37c 3 m = 2
12:35:31:322 37c GPU #4: Hawaii, 3072 MB available, 44 compute units
12:35:31:324 37c GPU #4 recognized as Radeon 290X
12:35:31:327 37c card 4, m1 3072, m2 3072 w 352
12:35:31:330 37c 4 m = 2
12:35:31:332 37c GPU #5: Hawaii, 3072 MB available, 40 compute units
12:35:31:335 37c GPU #5 recognized as Radeon 290
12:35:31:338 37c card 5, m1 3072, m2 3072 w 320
12:35:31:340 37c 5 m = 2
12:35:31:343 37c POOL version
12:35:31:345 37c b141
12:35:31:348 37c Platform: Windows
12:35:31:428 37c start building OpenCL program for GPU 0...
12:35:31:431 37c done
12:35:31:641 37c start building OpenCL program for GPU 1...
12:35:31:660 37c done
12:35:31:874 37c start building OpenCL program for GPU 2...
12:35:31:882 37c done
12:35:32:096 37c start building OpenCL program for GPU 3...
12:35:32:104 37c done
12:35:32:318 37c start building OpenCL program for GPU 4...
12:35:32:336 37c done
12:35:32:548 37c start building OpenCL program for GPU 5...
12:35:32:557 37c done
12:35:32:827 37c GPU #0 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:862 37c GPU #1 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:889 37c GPU #2 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:920 37c GPU #3 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
12:35:32:948 37c GPU #4 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
12:35:32:977 37c GPU #5 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
12:35:32:980 37c Total cards: 6
12:35:45:294 37c Watchdog enabled
12:35:45:302 37c Remote management (READ-ONLY MODE) is enabled on port 3333
12:35:45:312 37c
12:35:45:340 f74 XMR: Stratum - connecting to 'xmr-eu.dwarfpool.com' <79.137.57.106> port 8005 (unsecure)
12:35:45:344 f74 send: {"method": "login", "params": {"login": "449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6", "pass": "x", "agent": "xmr/1.0"}, "id": 1}
12:35:45:348 f74 XMR: Stratum - Connected (xmr-eu.dwarfpool.com:8005) (unsecure)
12:35:45:465 f74 got 303 bytes
12:35:45:472 f74 buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"347476290026679","job":{"blob":"0606e7d099d105ead1111980c112dffa67e22e51b19075d1f254eb096da765eb046b6dc5607bd90 0000000e41d4d3329ddcaf21517bbf998b4b7f81f95199f9ed1fdd47c7620a3bfcf61c60d","job_id":"322775170905515","target":"dc460300"},"status":"OK"}}
12:35:45:479 f74 parse packet: 302
12:35:45:484 f74 new buf size: 0
12:35:45:698 3d0 GPU 5, GpuMiner k1a failed -36
12:35:45:701 2ec GPU 2, GpuMiner k1a failed -36
12:35:45:704 99c GPU 4, GpuMiner k1a failed -36
12:35:45:707 89c GPU 3, GpuMiner k1a failed -36
12:35:45:711 9a4 GPU 1, GpuMiner k1a failed -36
12:35:45:714 eb4 GPU 0, GpuMiner k1a failed -36
12:35:45:718 bfc GPU 5, GpuMiner k1a failed -36
12:35:45:721 e8c GPU 2, GpuMiner k1a failed -36
12:35:45:724 ff0 GPU 4, GpuMiner k1a failed -36
12:35:45:729 f58 GPU 3, GpuMiner k1a failed -36
12:35:45:733 8c4 GPU 1, GpuMiner k1a failed -36
12:35:45:736 c38 GPU 0, GpuMiner k1a failed -36
12:35:45:740 790 GPU 5, GpuMiner k1a failed -36
12:35:45:744 3f0 GPU 2, GpuMiner k1a failed -36
12:35:45:747 ae4 GPU 4, GpuMiner k1a failed -36
12:35:45:751 e7c GPU 3, GpuMiner k1a failed -36
12:35:45:754 a40 GPU 1, GpuMiner k1a failed -36
12:35:45:757 3a8 GPU 0, GpuMiner k1a failed -36
12:35:45:762 470 GPU 5, GpuMiner k1a failed -36
12:35:45:766 5ac GPU 2, GpuMiner k1a failed -36
12:35:45:769 7ac GPU 4, GpuMiner k1a failed -36
12:35:45:772 c44 GPU 3, GpuMiner k1a failed -36
12:35:45:776 794 GPU 1, GpuMiner k1a failed -36
12:35:45:780 c3c GPU 0, GpuMiner k1a failed -36
Can't get v10.2 to run with any of my r9 fury rig's running 6 card's in each rig using 15.7 drivers on windows 10 pro . They all run fine on v9.7 ?
Could also use any help getting my main account back user name was "Daveeoff" had it for 4 years and had it hi jacked about 2 months ago they changed my password and my password account rest set email address so now i'm on here as a noob not sure what else there is i can do to recover it
Could also use any help getting my main account back user name was "Daveeoff" had it for 4 years and had it hi jacked about 2 months ago they changed my password and my password account rest set email address so now i'm on here as a noob not sure what else there is i can do to recover it
Jump to: