Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1071. (Read 6590718 times)

It's highly volatile, but you can work it out with simple math:
1) look up the total network hash rate.
2) look up the current block reward.
https://explorer.zcha.in/
So 100 Sols/s / 3.4 Million Sols/s *  1.5 Zec/block * 576 blocks / day = 0.025 Zec/day

but be aware, if Claymore releases a miner capable 100 zec from a single 390, the network hashrate will probably tipple overnight.

Per card of AMD 390.. how much zcash we can earn?

 It's ASIC resistant, and while it uses a completely different algorythm it seems to be about as GPU resistant as XMR (Monero) - I suspect that a lot of the current reason CPUs are being fairly competative is that the code for them is more mature than the code available for GPUs, though both are still pretty new and raw and probably not well optimised.

There's a Nicehash varient (originated from flypool I think but Nicehash seems to have turned around and re-released it or did the same thing) that supports stratum, seems to work on pretty much any pool BUT that propriatary one with the MAJOR payout issues.

 Been stable on all of my NVidia Win7 based rigs except the one that's not stable on ETH (it's tossup on ETH or ZCash for stability on THAT rig, which seems to be having some sort of hardware issue I've not yet had the time to dig into and fix).

 It IS picky about driver version - do NOT use the latest 375.70 driver version or the one before that, makes the entire system VERY unstable on both 950/960 based systems AND 1070 based systems. I've had to revert those to 372.70 which has proven to be VERY stable for all mining type work *AND* gets along with my AMD APU/GPU drivers.

 The coin itself doesn't seem to be a scam, it's just early days and not a lot of time was given to write good miner software - YET - and the pools are still having issues, likely in part due to the BROKEN WALLET issues.
 On the other hand, that one "propriatary" pool DOES seem to be somewhat scammy - no clue why they decided to support a non-standard protocal for interfacing to their pool if they're NOT trying to scam folks.

 Genoil, in particular, is using "solver" code from other folks and hasn't taken the time to "roll his own miner" yet (I wish he would, it would probably work a lot better and be a lot more reliable).

 I'd really like to see that, and a miner out of wolf0, so Claymore has some competition when he releases something. 8-)




 Nice part all of the "swing" of hashrate into ZCoin has made my OTHER rigs noticeably more profitable too. 8-)

genoil does work.  You have to run it with single cards first.

In my case my R9 280x is GPU 2 so what I did was run it first.

1. delete all .bin files in the cache directory
2. Launch an elevated command prompt with run as administrator
3. run the command inside the quotes not the batch file. 'genoil.exe -c zec.suprnova.cc:2142 -u miner.name -p password -P 0 -g 2'
4. crash. repeat several times until it runs successfully.
5. repeat steps for the other cards.
6. now you can run batch file which mine shows.


Now for good measure I also mine another 12 Sol/s on my cpu using 4 of my 8 threads available.


I really hope Claymore releases his soon as I am getting very strange hash rate my RX 480 is not what it should be.

why genoil still dont work with GCN 1.0??
why is nheqminer garbage and hashes HALF the speed of zcashgpuclient miner?
why does zcashgpuclient miner ONLY fucking work for scam pool coinsforall.io

is this whole coin just a scam? where only select miners have real working software???

2gb card? Is the dag file to big for 2gb cards? You might want to look that up. Will if its not then did you set virtual memory to at least 16gb? Did you read the readme.txt and look at the command codes -gsr 2 -eres and try adding that to your file? hope that helps

OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU 0, OpenCL error -38 - cannot write buffer for DAG

6970 2gb

with the above
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

It's in the instructions on the front page, -di if I recall correctly

this for mining zec?

Create a .bat file with that inside it. Ummm.......you are a newbie here so I will spell it out.

Create a new text document and paste those setting it in. Then File> Save as>name it something.bat and choose All files in the Save a type field.

BAT file example:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool *yourpool* -ewal *yourwallet* -epsw *password*

Thats where you put those lines...

ETH Donations accepted:
0xe80b23ded89f38051c3dd96b471ef5e5999862b0

For AMD cards, set the following environment variables, especially if you have 2GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

WHERE DO I WRITE THESE?

@Claymore

is it possible to select the graphic cards which we want to use for mining ?

I want to use one of them for other coins. (Testing the other coin.)

Claymore,

100 sol/s per 1 x 390 GPU???

a 5x390 rig which can do 150MHs of ETH mining, can do 500 sol/s ZEC mining?

Look up like three posts and see for yourself.

Is it true that Claymore made a powerful ZCash miner? Is there a link?

Good news for all ETH miners 

Where can I follow you for updates? I want to use ur zec mining software asap:)

pfff! CIA, is a dumb... obviously - he is right hand of mr. Putin!    *lol*