Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1272.

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: rednoW on June 14, 2016, 09:33:19 AM

Have anyone managed to make CDM with new Dagger-Hashimoto algo on Nicehash? Could you share the config or bat file?

What coins is this algo for?
I tried to search for it, but was only able to find Ethereum based coins (and Ethereum is not using pure dagger-hashimoto afaik)

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: rednoW on June 14, 2016, 09:33:19 AM

Have anyone managed to make CDM with new Dagger-Hashimoto algo on Nicehash? Could you share the config or bat file?

Nicehash created another stratum version, incompatible with other versions. So I have to implement "-esm 3", working on it.

rednoW

legendary

Activity: 1510

Merit: 1003

Have anyone managed to make CDM with new Dagger-Hashimoto algo on Nicehash? Could you share the config or bat file?

ober

newbie

Activity: 29

Merit: 0

Quote from: Claymore on June 14, 2016, 04:41:00 AM

-esm option works properly, so you can set -esm 2 if you want. But you are correct, now I see that miner can show incorrect -esm value in some cases, I will fix it in next update.

Thanks in advance, Claymore. In my case I want to use -esm 1

navydude

sr. member

Activity: 283

Merit: 250

If im not sending stale shares does that mean I can not receive uncle blocks?!? I have yet to mine a uncle that i have been aware of and today marks one month. You would think that with 340 m/h it would mine a uncle or two. Still trying to figure out exactly how all this works. I have started today sending stale with -estale option in claymores miner. Guess we shall see if it makes any difference.

reflexmk

sr. member

Activity: 289

Merit: 250

Anyone uses this miner with miningrigrentals? If yes, please tell how, I've had a countless unsuccessful attempts. Thanks.

soyab0007

hero member

Activity: 560

Merit: 500

what are the other way to mine etherum without Claymore mining app

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ober on June 14, 2016, 03:56:41 AM

Currently this is only cosmetic and annoying to see it. But what happens if pool owner changes something at pool side and i'm locked at "esm 2" only?
Claymore may decide to fix it

-esm option works properly, so you can set -esm 2 if you want. But you are correct, now I see that miner can show incorrect -esm value in some cases, I will fix it in next update.

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: merc84 on June 14, 2016, 03:10:58 AM

If miner is working what does it matter what stratum mode it specifies? Huh

??

some of us have bandwidth caps. a working stratum is needed and should be monitored for correctness.

since claymore charges 1% fee for use (and other miner authors do not, see "-ck", a mod here and author of the immensely popular cgminer program for an example) we feel entitled to fixes.

btw i use claymores miner and have donated to -ck and kano.

ober

newbie

Activity: 29

Merit: 0

Currently this is only cosmetic and annoying to see it. But what happens if pool owner changes something at pool side and i'm locked at "esm 2" only?
Claymore may decide to fix it

merc84

hero member

Activity: 799

Merit: 1000

If miner is working what does it matter what stratum mode it specifies? Huh

??

ober

newbie

Activity: 29

Merit: 0

Claymore,
recently I upgraded my miners from version 4.1 to 4.5. All is working except I noticed strange behavior with stratum mode - the miner always says "miner-proxy stratum mode" no matter which mode I set explicitly. With 4.1 and all prior versions I used qtminer mode, now with same command line options:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal XXX.X -epsw x -esm 1 -mode 1

I see:

14:30:06:323   978   GPU #0: set -etha as 0 (ETH algo for fast cards)
....................
14:30:06:433   770   ETH: Stratum - Connected (eu1.ethermine.org:4444)
14:30:06:480   978   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

14:30:06:480   978   miner-proxy stratum mode
14:30:06:480   978   Watchdog enabled

Any comments on this?

merc84

hero member

Activity: 799

Merit: 1000

Quote from: adamvp on June 13, 2016, 07:03:06 PM

Quote from: JuanHungLo on June 13, 2016, 01:44:46 PM

Quote from: Paractor on June 13, 2016, 01:10:11 PM

XFX is excellent for mining. It has just two fans, and use little electricity by the fans.

Why reducing the memory frequency will freeze your GPU?

I have too many XFX 280x's. I can barely undervolt by 50 before freezing issues start up. Other than that, I love their lifetime warranty. They've exchanged many coolers and recently just had 2 GPUs replaced with Tongas (380x), paid for shipping only. How can you beat that?

I have this card too but I cannot undervolt it any way, nor MSI nor Trixx..
More over I cannot switch to another card than on board..

Its probably voltage locked only way to change it would be flash bios.

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: JuanHungLo on June 13, 2016, 01:44:46 PM

Quote from: Paractor on June 13, 2016, 01:10:11 PM

XFX is excellent for mining. It has just two fans, and use little electricity by the fans.

Why reducing the memory frequency will freeze your GPU?

I have too many XFX 280x's. I can barely undervolt by 50 before freezing issues start up. Other than that, I love their lifetime warranty. They've exchanged many coolers and recently just had 2 GPUs replaced with Tongas (380x), paid for shipping only. How can you beat that?

I have this card too but I cannot undervolt it any way, nor MSI nor Trixx..
More over I cannot switch to another card than on board..

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: Paractor on June 13, 2016, 01:10:11 PM

Why reducing the memory frequency will freeze your GPU?

I have no idea - just a post factum. After getting back to 1500 rig worked for 24h without problem (underclocked stopped to work in ~25-30m)

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: Paractor on June 13, 2016, 01:10:11 PM

XFX is excellent for mining. It has just two fans, and use little electricity by the fans.

Why reducing the memory frequency will freeze your GPU?

I have too many XFX 280x's. I can barely undervolt by 50 before freezing issues start up. Other than that, I love their lifetime warranty. They've exchanged many coolers and recently just had 2 GPUs replaced with Tongas (380x), paid for shipping only. How can you beat that?

pikachuy

sr. member

Activity: 544

Merit: 250

Quote from: parmatiya on June 13, 2016, 11:51:11 AM

Quote from: adamvp on June 13, 2016, 11:44:46 AM

what to do to make power voltage lowering working?

If you use the Windows OS, you can use the MSI afterburner to reduce the core voltage if yoour GPU is not voltage locked.

I'd prefer sapphire trixx, I had two gigabyte 380's that would not let me undervolt in msi afterburner, but sapphire trixx let me undervolt them.

Paractor

full member

Activity: 274

Merit: 133

XFX is excellent for mining. It has just two fans, and use little electricity by the fans.

Why reducing the memory frequency will freeze your GPU?

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: citronick on June 12, 2016, 11:55:29 PM

Stock is 1500 and 1125 works fine, and it helps bring the total power draw around 1300w for 5 x 390s.
The 390 has plenty of VRAM and 1125 is good enough for it to perform DAG activities.
I observe CDM take a bit more time to write the DAG files, but once it's in there no issues since its on board VRAM.
The 390 is a power hungry card so I needed to tame it down as much as possible without too much reduction in MHs.
The combination of "-100mV, 1050, 1125" without any ROM mod is perfect for now.
I haven't tried Heliox rom mods yet - but if it can further reduce power consumption for the 390, it's worth a try.

I have 3x R9 390 - XFX and 1 R9 390 PowerColor. Trying to reduce Memory Clock even to 1450 from stock resulted in rig freezing. And all happened due to this shitty R9 390 PowerColor.

So had to stay with stock Mem Clock.

parmatiya

full member

Activity: 239

Merit: 250

Quote from: adamvp on June 13, 2016, 11:44:46 AM

what to do to make power voltage lowering working?

If you use the Windows OS, you can use the MSI afterburner to reduce the core voltage if yoour GPU is not voltage locked.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1272. (Read 6590757 times)