Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1285. (Read 6590757 times)

member
Activity: 96
Merit: 10
Been mining @ dwarfpool for some months now, looking at 24hr earnings getting 1.3 eth per/day with 200mhs. Where as calculator says i should mine 1.9 eth/day now I know calculators aren't entirely accurate but this seems too large a variance. I know from mining stats that I have virtually 0 rejects, the dwarfpool sever is very close ~ 70ms average ping. So I wish to find a pool that has fairer payout, for the moment I am trying solo but worried that 200Mh/s is not enough to solo with the current diff. So if anyone can list their fav pool for me to try I'd appreciate that.

Is dwarf reporting 200Mh? I had 90+% of what calculator offers with CDM, so i guess something else is wrong. I tried several pools but not much difference to tell which pays best.
hero member
Activity: 799
Merit: 1000
Been mining @ dwarfpool for some months now, looking at 24hr earnings getting 1.3 eth per/day with 200mhs. Where as calculator says i should mine 1.9 eth/day now I know calculators aren't entirely accurate but this seems too large a variance. I know from mining stats that I have virtually 0 rejects, the dwarfpool sever is very close ~ 70ms average ping. So I wish to find a pool that has fairer payout, for the moment I am trying solo but worried that 200Mh/s is not enough to solo with the current diff. So if anyone can list their fav pool for me to try I'd appreciate that.
hero member
Activity: 742
Merit: 500
Just a stats:

4x R9 390 (overclocked to 1100MHz)

Mining only ETH

125.1MHs for whole rig (31.25MHs per card)

newbie
Activity: 7
Merit: 0
What is ETH+DCR ?

It means that you can mine Ethereum and Decred at the same time.
hero member
Activity: 560
Merit: 500
sr. member
Activity: 266
Merit: 250
★YoBit.Net★ 350+ Coins Exchange & Dice
what about ROI?
how much time will it take if I mine with R390x card?

If you have a good system with 6 R9 390x cards, and the electricity price is about $0.2/kWh, it will ROI in about 300-400 days.
hero member
Activity: 560
Merit: 500
what about ROI?
how much time will it take if I mine with R390x card?
hero member
Activity: 1638
Merit: 576
Leading Crypto Sports Betting & Casino Platform
does etherum mining is profitable?

Ethereum mining is very profitable at the moment. But the difficulty is rising fast. If you buy computer to mine now, you might not make profit.
hero member
Activity: 560
Merit: 500
does etherum mining is profitable?
sr. member
Activity: 266
Merit: 250
★YoBit.Net★ 350+ Coins Exchange & Dice
Can i mine ether and Revolver coin at the same time?

No, it can only mine the Ethereum and the DCR at the same. time.
member
Activity: 98
Merit: 10
Can i mine ether and Revolver coin at the same time?
full member
Activity: 165
Merit: 100
@Claymore , what would cause our miner to restart? I was running fine for 10 of my rigs until about 10 hours ago, one rig seems to restarted and I have seen the time running on the miner dropped from 570 odd hours to 10 hours only.. What might be the issue?
newbie
Activity: 12
Merit: 0
I'm sorry if this is in the wrong section:

Problem: I expected to get at least 13.5MH for this card (R7 370), cant seem to get more than 10MH as things are.
Fixes Attempted: (1) Tried using the latest 16.5.3 Drivers and the recommended 15.12 drivers, both only giving 10MH
Fixes Attempted: (2) Tried using using both claymore and genoils miner, both also giving me 10MH no matter the driver.
Fixes Attempted: (3) Tried overclocking with MSI Afterburner, set it at maxed allowed overclock, still stays below 11MH.

GPU: Gigabyte Windforce OC Edition R7 370 2GB GDDR5
Mainboard: H110I-PLUS
Ram: 8 GB DDR4
PSU: Corsair CX600M
Storage: SSD and HDD
OS: Windows 10 64bit

Any ideas or suggestions?
Try to update DirectX, .NET framework and C library or so


Does anyone compare new version to new Genoil's miner (and other miner) - only ethereum mode
Which is the best for Ati cards? (I have 380x 280x and 370)


Yeah, I just tried switching spots between my R9 380 on my miner with this problematic R7 370 and its confirmed, the card is the problem. The R9 380 performs flawlessly even with 16.5.3 drivers @ 20MH with claymore's miner.

Problem is the card itself, not the system, not the software/drivers.

Thank you!
hero member
Activity: 1246
Merit: 708
I'm sorry if this is in the wrong section:

Problem: I expected to get at least 13.5MH for this card (R7 370), cant seem to get more than 10MH as things are.
Fixes Attempted: (1) Tried using the latest 16.5.3 Drivers and the recommended 15.12 drivers, both only giving 10MH
Fixes Attempted: (2) Tried using using both claymore and genoils miner, both also giving me 10MH no matter the driver.
Fixes Attempted: (3) Tried overclocking with MSI Afterburner, set it at maxed allowed overclock, still stays below 11MH.

GPU: Gigabyte Windforce OC Edition R7 370 2GB GDDR5
Mainboard: H110I-PLUS
Ram: 8 GB DDR4
PSU: Corsair CX600M
Storage: SSD and HDD
OS: Windows 10 64bit

Any ideas or suggestions?
Try to update DirectX, .NET framework and C library or so


Does anyone compare new version to new Genoil's miner (and other miner) - only ethereum mode
Which is the best for Ati cards? (I have 380x 280x and 370)
newbie
Activity: 3
Merit: 0
Quote
Increase Windows virtual memory to minimum 16GB and use Cat 15.12

thanks a lot. virtual memory was already 20 gb. but somehow installing Cat 15.12 helped me. It still shows 3gb video RAM but miner works fine, thank you for advice!!!!
but I still can't understand why it doesn't work with new drivers on 1 motherboard and works well on another motherboard...))
newbie
Activity: 1
Merit: 0
I'm on a fresh Windows 10 install.  I have six cards installed but EthDcrMiner only sees one card of the six.

I've run this before on Windows 7 and 4 of the 6 cards registered and ran fine.  Two cards had yellow triangles in device manager so I opted to upgrade to Win 10 to see if that would fix it.

Now on this Windows 10 install, all six cards look great in Device Manager and also appear normal in Radeon Settings, yet the miner only sees one card.

Where do I start looking to get it to enable all the cards?

Here is the log file from the startup:

12:31:01:258   2f0   commandline: "C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v4.2 Beta\EthDcrMiner64.exe"
12:31:01:258   2f0   
12:31:01:274   2f0   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:31:01:274   2f0   º     Claymore's Dual Ethereum + Decred AMD GPU Miner  v4.5      º
12:31:01:274   2f0   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
12:31:01:289   2f0   
12:31:01:508   2f0   ETH: 1 pool is specified
12:31:01:508   2f0   Main Ethereum pool is eth-us2.dwarfpool.com:8008
12:31:01:649   2f0   OpenCL platform: AMD Accelerated Parallel Processing
12:31:01:664   2f0   
Cards available: 1
12:31:01:664   2f0   GPU #0: name: Tonga, 4096 MB available, 28 compute units
12:31:01:664   2f0   Total cards: 1
12:31:01:664   2f0   Initializing...

12:31:01:664   2f0   GPU #0 recognized as Radeon 285/380
12:31:01:664   2f0   POOL/SOLO version
12:31:01:680   2f0   b150
12:31:01:680   2f0   start building OpenCL program for GPU 0...
12:31:03:556   2f0   done
12:31:03:666   2f0   GPU #0: set -etha as 1 (ETH algo for slow cards)
12:31:03:853   2f0   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

12:31:03:853   c38   ETH: Stratum - connecting to 'eth-us2.dwarfpool.com' <209.141.38.185> port 8008
12:31:03:869   2f0   miner-proxy stratum mode
12:31:03:869   2f0   Watchdog enabled
12:31:03:884   2f0   Remote management is enabled on port 3333   


I've read through several pages and tried searching but can't come up with anything. Any help is appreciated.
newbie
Activity: 12
Merit: 0
I'm sorry if this is in the wrong section:

Problem: I expected to get at least 13.5MH for this card (R7 370), cant seem to get more than 10MH as things are.
Fixes Attempted: (1) Tried using the latest 16.5.3 Drivers and the recommended 15.12 drivers, both only giving 10MH
Fixes Attempted: (2) Tried using using both claymore and genoils miner, both also giving me 10MH no matter the driver.
Fixes Attempted: (3) Tried overclocking with MSI Afterburner, set it at maxed allowed overclock, still stays below 11MH.

GPU: Gigabyte Windforce OC Edition R7 370 2GB GDDR5
Mainboard: H110I-PLUS
Ram: 8 GB DDR4
PSU: Corsair CX600M
Storage: SSD and HDD
OS: Windows 10 64bit

Any ideas or suggestions?
donator
Activity: 1610
Merit: 1325
Miners developer
Again, about antiviruses alarm:
https://bitcointalksearch.org/topic/m.14501589
Also some people are trying to include my miners into their botnets (I get private messages about that regularly) and therefore after some time antiviruses mark them as viruses.
Unfortunately, there is nothing that I can do about that.
But, no problem with my antivirus in 4.1 version, 4.5 marked as a virus

It means you use bad/paranoid antivirus. Remove EthMan.exe, probably it causes false alarm.
newbie
Activity: 3
Merit: 0
Again, about antiviruses alarm:
https://bitcointalksearch.org/topic/m.14501589
Also some people are trying to include my miners into their botnets (I get private messages about that regularly) and therefore after some time antiviruses mark them as viruses.
Unfortunately, there is nothing that I can do about that.
But, no problem with my antivirus in 4.1 version, 4.5 marked as a virus
Jump to: