Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 190. (Read 6590718 times)

NO

-----
BTC

i like this, but it seems that the TDP would be highly variable and create more stress on the GPUs... right? i suppose this is just nicehash 2.0?

Be careful choosing a withdrawal coin - consider transaction fees. BTC is not a good choice.

You can use MiningPoolHub. They will automatically switch you to the most profitable coin for mining at the moment and auto-exchange to any coin you like (no hustle, they do your exchange). And it's not about  "what is doing best each week", it's about "what is doing best each block". Up until recently mining equihash with Nvidia was more profitable than ETH. They would autoswitch you between BTG, ZCL, ZEC and ZEN. But due to recent asics introduction to equihash and fork of BTG, BTG fell out of traditional equihash autoswitch and is now a standalone coin with its own equihash variant; still though the most profitable coin to mine most of the time. There are plenty of options of what to mine (coins), how to mine (miners) and where to mine (pools) - do your research and calculations.

Or Use Awesome miner, and point to a Yiimp Pool
https://ahashpool.com
https://zergpool.com
https://zpool.ca

using your desired coin in the password
-p c=
-p c=BTC

He's probably referring to mining BTG at Miningpoolhub and do autoexchange to Eth.

are you referring to any particular auto-switching mining platform or just setting to mine BTG in the .bat file? It seems like a lot of work to have to switch to what is doing best each week and nobody knows if BTG will sustain at a higher earning ratio than ETH. I do hope you can correct me here though...

I have Windows v1709 with the current updates and the GeForce 399.07 WHQL drivers with Claymore v11.9 running very stable. Don't know if the problem is with the Claymore miner or the drivers, but there is an issue causing the NVIDIA drivers to crash after a few hours when mining on Windows 1803.

Use Rufus to copy a Windows 1709 ISO to a USB flash drive and do a clean install of Windows by selecting the UEFI setup from the boot Bios boot menu with only a single GPU in the primary x16 PCI-E slot. After the install is finished, on the first logon disable Windows feature updates in gpedit. On Windows 10 Pro you can set a Group Policy to defer feature updates until they have been targeted for business deployment, which is about 4 months after the public release, or you can also defer feature updates for up to 365 days. This way you still get the security updates.

gpedit ==> Computer Configuration ==> Administrative Templates ==> Windows Components ==> Windows Updates ==> Windows Update for Business ==> Select when Preview Builds and Feature Updates are Received ==> Set to 'enabled' and  in the drop down select 'Semi-Annual Channel'. Underneath that option set 'After a Preview Build or Feature Update is released, defer receiving it for this many days:' to 365.

Then run Windows Update to get the latest updates and reboot. Go back in to gpedit and disable driver updates to keep Windows Update from modifying your drivers.

gpedit ==> Navigate to: Computer Configuration ==> Administrative Templates ==> Windows Components ==> Windows Update and set 'Do not include drivers with Windows Update' to enabled.

Shutdown to install the rest of the GPU's. Afterwards download the latest driver for your GPU's and then run the GPU driver setup. For some reason the latest DDU is not working for me so I did a clean install option from the driver installer when installing the latest NVIDIA driver.

I also go in to Windows Apps from the settings to uninstall all the extra Windows crapware and disable all the Windows spyware in the Privacy settings.

I could use some help troubleshooting my rig. For months my rig was solid as a rock running great until i foolishly ran a manual windows update. I have been working for several weeks to figure it out on my own but not been successful. Any help offered would be GREATLY appreciated. Here is my setup:

OS: Windows 10 Pro
MOBO: MSI Z270 Gaming Plus, Up to date Bios and Drivers
Power: Dual - Corsair TX-550 (Mobo & GPU 1), HP Server 750 PSU (powering Risers 2-6 and GPU's 2-6)
GPU's - 1-4 NVIDIA GTX 1070 Founders Edition, 5-6 RX580's
Miner: Currently 11.7 (could not get 11.9 Running)
NVIDIA GPU Driver: Currently 390.77

MOBO BIOS Config:
4G Crypto Mining - Enabled
PCIE - Auto (tried Gen1-Gen 3)
Power Failure Recover - Power State - On
Audio - Disabled

Pool - Ethermine

Problem: My problems started when I foolishly decided to manually install the Windows Update. I tried all kinds of things and eventually got frustrated and wiped the whole system with a fresh windows 10 install. Now that I got it back up and running I tried Claymore 11.9 but I could not get any NVIDIA drivers to work to get my hardware to show up (more than 1 GPU). I eventually got 390.77 and 11.7 Running but only showing 1 GPU. I'd like to get on 11.9 but when I read the help file I find this "10xx cards in Windows 10 x64: just use latest 372.54 drivers from Nvidia website, note that you must have Win10 Anniversary update."

I have searched the old drivers section of NVIDIA's site and can't find 372.54 and I'm struggling to understand how to get the Win10 Anniversary update.

Any suggestions here from folks with similar setups running 11.9 what drivers are you running?

PS. For now ignore the RX580's they are unplugged, also I've only got GPU 1-2 (both NVIDIA 1070's) installed/cabled up.

Thanks in advance for your advice/help.
Like
Show more reactions

This is was great new for me; I was looking for a new gaming graphics card at around the time the crypto market went south and managed to pick up a nice RX 580 8GB (brand new) card for a good price.

Unless you are mining ETH for some ideological reasons, it would be more profitable for you to mine something else, e.g. BTG, with autoexchange to ETH. And no need to switch to win 7 or linux.

With Linux and Win7 (IIRC) it still works.

it took some time since I was in game, Is it still possible to mine ethereum on gtx 1060 3 gb ? Im still getting an error with DAG size.

Maybe a little less energy, but not much significantly less.

Basically when they run slower they use less compute power so it uses less power overall because the compute is waiting for the memory data first and if the memory runs slower then it bottle necks the computing speed.

Does it use less energy than the old DAG?

Seems like a GPU manufacturers butting in

its a big business of course

and if these were true great news for GPU miners, light hopes still there probably

Hope my 480's will way still make some kicks with the new HW coming in

I watched some of the dev meeting and they mentioned giving a grant to implement progpow to render asic useless which hopefully will happen than all the other dagger coins will follow, the monero devs are working on a new fork that not only keeps asic from mining but fpga's I think this is awesome and will screw bitmain now only if zcash would do something but the way zooko talks he don't give a shit about gpu miners who made him rich

LOL! Back in 2014-2015, I had a bunch of 280X gpus and there was nothing to mine. I decided what the hell, might as well download some games and play with Crossfire 280X.

Every single game lagged like crazy, I checked the resource monitor and it wasn't the GPUs but it was the CPUs which were all at 99%. Basically the CPU was slowing down the GPU and the games were unplayable.

Basically back then you needed at least an i5 or greater to play most games in high detail. The Sempron and i3 processors I had wouldn't cut it.

we are hoping to push for a fork off the main chain using the asic resistant progpow algo
Bitcoin Interest is piloting such a change for thier eth fork next week

Prepare to see a big GPU sell-off.

I'm now going to turn into a gamer. Is there any high-end game that requires 12 high-end GPU's at once and works with only 2 GB RAM + Pentium processor?

LOL