Is it possible to delay all mining until DAG generation completes? I have a GPU that's pretty touchy and if the mining starts before it's DAG is generated the GPU will never come up. This causes the app to restart and sometimes crash. I've used the serial options and tried to slow it down but that doesn't prevent the mining from starting before DAG generation on all cards. Just a thought.
Thanks!
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 458. (Read 6590718 times)
January 25, 2018, 05:20:07 PM
January 25, 2018, 04:26:42 PM
Hello, to the change of house the claymore does not advance of this situation and when it does it takes 10 or 15 minutes in beginning to mine, once initiated some graphs mine to 0.0 Mhs, some help?
https://ibb.co/bUom8b
Thanks!
https://ibb.co/bUom8b
Thanks!
January 25, 2018, 04:04:22 PM
Would it be possible to do ETH + XMR on an AMD graphics card?
ETH with the RAM, XMR with the processor.
Yes you could. Cards will be mine etherium and cpu independent from cards will mine monero. ETH with the RAM, XMR with the processor.
January 25, 2018, 04:02:24 PM
I do not have enough time to set up the latest versions because Claymore's so often new versions go out. Anyway thank you it's really best miner program and best developer!
January 25, 2018, 03:45:58 PM
He mean to use the RAM of the GPU to decrypt ETH
And use the CPU of the GPU to mine somethink other,
Works, but you need more Power and also produce more heat from the Cards,
Because mining of ETH dont use the GPU to mine, most time the use the memory to mine ETH,
And a little of the GPU,
DCR and much other currencies can be mined on the CPU of the Display card while mining ETH on the same Card
And use the CPU of the GPU to mine somethink other,
Works, but you need more Power and also produce more heat from the Cards,
Because mining of ETH dont use the GPU to mine, most time the use the memory to mine ETH,
And a little of the GPU,
DCR and much other currencies can be mined on the CPU of the Display card while mining ETH on the same Card
January 25, 2018, 03:37:41 PM
Would it be possible to do ETH + XMR on an AMD graphics card?
ETH with the RAM, XMR with the processor.
ETH with the RAM, XMR with the processor.
Umm what? ETH with RAM?
January 25, 2018, 03:26:47 PM
Would it be possible to do ETH + XMR on an AMD graphics card?
ETH with the RAM, XMR with the processor.
ETH with the RAM, XMR with the processor.
January 25, 2018, 03:14:00 PM
I got an really bad virus on my netzworkserver last day,
i think it was comming over the miningsoftware or eth-proxy, witch run on the server,
because no users works on it, not software was on it, and it runs over 5 years without any shutdowns or issues, I installed ETH-proxy last week on it, and trobels began
We also have AV and a Sonicwall installed too
I hope, I dont open a Backdoor with the proxy over it,
Because I checked the LOGs from the server, and it comes over Remote Access
And encrypt the hole server, my luck was a Tape Backup
i think it was comming over the miningsoftware or eth-proxy, witch run on the server,
because no users works on it, not software was on it, and it runs over 5 years without any shutdowns or issues, I installed ETH-proxy last week on it, and trobels began
We also have AV and a Sonicwall installed too
I hope, I dont open a Backdoor with the proxy over it,
Because I checked the LOGs from the server, and it comes over Remote Access
And encrypt the hole server, my luck was a Tape Backup
January 25, 2018, 03:04:13 PM
Thank you both for your comments. I am still trying to figure out what can be happening.
https://ibb.co/kpvgrw
This is my current situation, after trying every power option in my windows 8.1. You can see that after exactly 2 minutes being AFK, mi hashrate drops from 30.5 Mh/s to 22 Mh/s, and returns to 30.5 Mh/s exactly when i move my mouse.
Also I've been mesuring power comsuption while in 30.5 Mh/s and while in 22 Mh/s and both are the same. It doesn't save any power...
I wasn't able to figure out how to change power level options in my GPU (Asus GTX 1070) so, maybe I still have light at the end of the tunnel.
You know, the funny thing is ... your temp doesn't drop. It looks like the card is doing the same work but is being miscounted for some reason. When mine slows, I usually see a couple of degrees drop off of the temp.
I finally found it. I was killing every process and service in windows until I reached the one... CCleaner.
I don't know how or what it was doing (I will investigate further), but being in background it was slowing my mining by 25-30%.
Now it is fine. Thanks to everyone that helped or tried to. I hope this can help somebody else.
That's really strange..... I have CCleaner running on all my miners and have never had an issue like that. I'll have to shut it off and see if things get any better.
Thanks for the info! January 25, 2018, 02:31:00 PM
Thank you both for your comments. I am still trying to figure out what can be happening.
https://ibb.co/kpvgrw
This is my current situation, after trying every power option in my windows 8.1. You can see that after exactly 2 minutes being AFK, mi hashrate drops from 30.5 Mh/s to 22 Mh/s, and returns to 30.5 Mh/s exactly when i move my mouse.
Also I've been mesuring power comsuption while in 30.5 Mh/s and while in 22 Mh/s and both are the same. It doesn't save any power...
I wasn't able to figure out how to change power level options in my GPU (Asus GTX 1070) so, maybe I still have light at the end of the tunnel.
You know, the funny thing is ... your temp doesn't drop. It looks like the card is doing the same work but is being miscounted for some reason. When mine slows, I usually see a couple of degrees drop off of the temp.
I finally found it. I was killing every process and service in windows until I reached the one... CCleaner.
I don't know how or what it was doing (I will investigate further), but being in background it was slowing my mining by 25-30%.
Now it is fine. Thanks to everyone that helped or tried to. I hope this can help somebody else.
January 25, 2018, 02:26:13 PM
My rig (6 cards) immediately crashes when I start mining ETH. When I take one random card out it mines stable on 5 cards. It works perfectly on all other coins with 6 cards. I've read in old topics that it could be the PSU but I have a new Corsair 1200W for 6 RX580's so that should be enough. Any way I could test it?
use the command -lidag 2 and see if that fixes it. There is an inrush of power at the DAG generation phase, and your power supply may be too sensitive to it. By slowing the DAG generation just a bit your power supply may be able to keep up. I had this same issue on a couple rigs and this fixed it.
Interesting, I used the "-gser 5" to achieve the same thing, I must have missed this one in the readme file.
Thanks both for replying but unfortunately both commands didn´t solve my problem. Maybe something else I can try?
https://bitcointalksearch.org/topic/m.28815969
January 25, 2018, 02:16:53 PM
Is it possible to use the "-r?
Hi. Drop me a pm if you are still interested. January 25, 2018, 02:03:49 PM
v10.6:
- fixed critical issue in remote management feature (attacker could crash miner even in read-only mode).
This update is required only if you expose remote management port to internet for some reason.
- fixed critical issue in remote management feature (attacker could crash miner even in read-only mode).
This update is required only if you expose remote management port to internet for some reason.
Trying to download this update, but all links / in different browsers im getting Virus detected. Never had that before with previous builds, on the same system.
I have the same result. Holding off for the time being.
January 25, 2018, 01:51:23 PM
Hello,
i use Win 10 - 64 bit
2x Rx470 with 27-27-5 MHS
After every Connection Problem
ETH: Stratum - Cannot connect to us1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
the hashrate drops to 6 - 10 MHS
after claymore restart the MHS is again normal.
HOW can i solve this drop?
i use Win 10 - 64 bit
2x Rx470 with 27-27-5 MHS
After every Connection Problem
ETH: Stratum - Cannot connect to us1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
the hashrate drops to 6 - 10 MHS
after claymore restart the MHS is again normal.
HOW can i solve this drop?
I think your having packet loss in connectivity. maybe what happens is whenever the miner doesnt reach toe server to get new job the hashrate goes down because their is nothing to work on.
this will also lead to lot of invalid shares, and you dont want that.
I would suggest contact you Internet service provider and get the connectivity fixed.
January 25, 2018, 01:36:44 PM
Hello,
i use Win 10 - 64 bit
2x Rx470 with 27-27-5 MHS
After every Connection Problem
ETH: Stratum - Cannot connect to us1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
the hashrate drops to 6 - 10 MHS
after claymore restart the MHS is again normal.
HOW can i solve this drop?
i use Win 10 - 64 bit
2x Rx470 with 27-27-5 MHS
After every Connection Problem
ETH: Stratum - Cannot connect to us1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
the hashrate drops to 6 - 10 MHS
after claymore restart the MHS is again normal.
HOW can i solve this drop?
January 25, 2018, 12:56:00 PM
Will dual mining still be a thing now that ASICs are comming for SIA/DCR?
Dual mining is dead until another dual algorithm is added. SIA ASICs are shipping, Baikal Giant B does DCR @ 160GH. DCR may be ok short term since other coins better on the Baikal currently. January 25, 2018, 12:48:26 PM
Is there a workaround for the temp display ?
I will only get the temp for GPU 0 and the other will not be showed,
Same on 2 rigs
Claymore 12.6,
Claymore 12.5 shows temp correct
I will only get the temp for GPU 0 and the other will not be showed,
Same on 2 rigs
Claymore 12.6,
Claymore 12.5 shows temp correct
January 25, 2018, 11:22:10 AM
I'm wondering myself as well: which dual coin to mine now?
some time and dual will be waste of electricity, January 25, 2018, 11:21:25 AM
I'm wondering myself as well: which dual coin to mine now?
January 25, 2018, 11:16:37 AM
i think was a problem with all majority of the miners pool,
But is it a problem that is being solved? because in my case with ethermine it's happening now too..
Jump to: