Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 661.

BennyT

full member

Activity: 259

Merit: 108

Quote from: NoHash on August 18, 2017, 07:23:02 AM

No reported Fan speed or GPU temp in Claymore:

Claymore 9.7
AMD Blockchain driver
rx 470
Win 10 64
AB beta 16

In the 'black' window my fan speed and temps (in pink) are reporting zero, they are visible in GPUZ.

Anyone else have this issue?

Yes, it's not just with AMD's. Happens on my 1060's randomly as well. It often starts out reporting fan speeds and every now and then it will stop reporting the fan speed on a few cards.

NoHash

newbie

Activity: 34

Merit: 0

No reported Fan speed or GPU temp in Claymore:

Claymore 9.7
AMD Blockchain driver
rx 470
Win 10 64
AB beta 16

In the 'black' window my fan speed and temps (in pink) are reporting zero, they are visible in GPUZ.

Anyone else have this issue?

dogf

newbie

Activity: 4

Merit: 0

I have 6 xfx 470 4G, was running 158.

I try the beta one, and my experience is:

I modded the cards, set the gpu voltage to static 930 all stages, but when running Claymore, the voltage up to ~1080. I could not understand why.
+ Claymore cannot control voltage and frequency of both gpu and memory.
+ Claymore 9.7 can run 28 each card, resulting 168 MHz in total, can not control fan + temp
+ Claymore 9.8 can also run 28 each. It can control fan + temp

I try AB beta, it helped to to reduce 3 first cards to ~980 mV, and 3 remaining to ~880 mV. I could not understand why there is a difference between 2 card groups, because physically all 6 cards are the same: same version, same bios. All cards show -96 mV in AB.

+ I tried many way but cannot reduce the first 3 cards to 880 mV.
+ I could not also reset all cards to 1080 to try again.

Removing & reinstalling everything (driver, AB) does not change the situation: 1080 mv then down to 980 for the 3 first cards, to 880 for the remaining.

So now I run all cards consistently, but 3 with 980mV, 3 with 880 mv. Very stable, Sad

but not happy because I want to reduce all cards to 880, or keep 930 mV untouch in the Bios setting.

Anyone has any idea?

NoHash

newbie

Activity: 34

Merit: 0

Quote from: Havane on August 18, 2017, 12:42:47 AM

Quick feedback : everything is stable with my 6 RX 480 rig, and the new AMD blockchain driver. With a modded bios, MSI afterburner for undervolting, I have 180 Mh/s back with ETH + DCR mining, instead of 160 Mh/s before Grin

I assume this is single mining, what do you get dual mining decred at dcri 30?

sir4o

newbie

Activity: 67

Merit: 0

Quote from: HendrikJan on August 18, 2017, 05:16:52 AM

Quote from: Havane on August 18, 2017, 12:42:47 AM

Quick feedback : everything is stable with my 6 RX 480 rig, and the new AMD blockchain driver. With a modded bios, MSI afterburner for undervolting, I have 180 Mh/s back with ETH + DCR mining, instead of 160 Mh/s before Grin

Wow!!!
That is impressive because after 24 hours is dislike the new driver more and more.
I just can`t get it to run as stable as before. Also uses more power and a total of 173Mh/s.
Also with 6x RX480 so i really would like to know how you did that.
Maybe because i have different brands in 1 rig?

probably because he overclocked more the memory and dual mining

HendrikJan

member

Activity: 64

Merit: 10

Quote from: Havane on August 18, 2017, 12:42:47 AM

Quick feedback : everything is stable with my 6 RX 480 rig, and the new AMD blockchain driver. With a modded bios, MSI afterburner for undervolting, I have 180 Mh/s back with ETH + DCR mining, instead of 160 Mh/s before Grin

Wow!!!
That is impressive because after 24 hours is dislike the new driver more and more.
I just can`t get it to run as stable as before. Also uses more power and a total of 173Mh/s.
Also with 6x RX480 so i really would like to know how you did that.
Maybe because i have different brands in 1 rig?

onurgozupek

hero member

Activity: 1319

Merit: 593

In #Bitcoin me trust

Will there be any updates soon for AMD's new mining drivers?

zenmining

newbie

Activity: 58

Merit: 0

Anybody knows about software for monitor Claymor rigs and pool data in one place? Can’t find anything except EthMan?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: h311m4n on August 18, 2017, 02:30:35 AM

@Claymore
Can we expect the next update to fix the voltage control from your miner with the latest amd driver/dag fix? I guess like quite a few farmers, we'd rather manage everything from a single program rather than use AB or remod all the bios' again with fixed voltages

Thanks!

Have you tried latest AB with latest AMD drivers for blockchain? It does not work for me (I don't see any changes in power consumption when I change voltage in AB), at least in Win10+RX580. So the problem is not in my miner only, it looks like another ADL issue:
https://bitcointalksearch.org/topic/m.20538901
I've contacted AMD and we will try to fix it.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Just undervolt in WattTool right when Windows starts. Its the only feature that works with the new drivers.

cdrx

full member

Activity: 441

Merit: 109

dag change and job timeouts will make u loose the voltage sets, I don't think is fixable, if it was, Claymore would have done it already.

if u use use the claymore settings to not change dag (fee related) and bigger job timeouts will not change undervoltage settings, untill maybe something else interfere with ur miner.

but everything works great in full speed when undervolted in bios - rx580s', latest claymore, amd beta chain driver, AB beta 16.

h311m4n

sr. member

Activity: 487

Merit: 266

@Claymore

Can we expect the next update to fix the voltage control from your miner with the latest amd driver/dag fix? I guess like quite a few farmers, we'd rather manage everything from a single program rather than use AB or remod all the bios' again with fixed voltages

Thanks!

kkourmousis

member

Activity: 119

Merit: 10

Quote from: Jell on August 17, 2017, 01:57:02 PM

Quote from: kkourmousis on August 17, 2017, 01:05:25 PM

Quote from: Jell on August 17, 2017, 08:32:32 AM

i have 5 x RX580 Nitro + Cards (Hynix)

I ahve updated to beta driver and Claymore 9.8 like others i cant control voltages in claymore nor latest AfterBurner but i can in trixx. Im actually settings clocks in voltages and fans in trixx and im running stable at 30 Mhs dual mining eth and SIA using around 100w per card in GPUz

I have same cards and TRIXX does not work. Are yours 8GB as well?

When TRIXX opens I do not have values on anything. All clocks are zeros. Any changes I do have 0 effect

Yes my cards are 8gb, sorry if this is a daft question but are you double clicking into the values for GPU/CPU clock, typing the values and then clicking the apply button at the bottom?

Quote from: kkourmousis on August 17, 2017, 01:58:42 PM

Yes I am. Trixx v 6.4 right
It may be that I have iGPU enabled. I will check in a couble of hours, now I am in a football match (forca PAOK :p )

Nothing changed. I am still unable to perform any changes using Trixx

juville

newbie

Activity: 13

Merit: 0

Quote from: Temporel on August 17, 2017, 04:36:16 PM

Quote from: Temporel on August 17, 2017, 03:09:08 PM

Quote from: juville on August 17, 2017, 01:19:03 PM

Quote from: Temporel on August 17, 2017, 01:04:27 PM

Quote from: juville on August 17, 2017, 11:29:35 AM

Quote from: alucard20724 on August 17, 2017, 11:10:43 AM

Quote from: juville on August 17, 2017, 11:05:44 AM

Hi claymore and all,

My rig has 7 gpu.

I'm using biostar TB250-btc motherboard with 1050 Supersonic PSU.
Running 7 1070 Windforce OC 8GB gpu.

My rig can run from 1 to 2 days.

However, upon facing error, i have set -r 1 to trigger a reboot.bat to rs it.

This is where to problem occurs.

When my system restart and the claymore miners starts, it couldn't detect my gpu and starts prompting the error below:

No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit

The error just kept repeating itself.

The miner doesn't restart and this error doesn't trigger my -r 1 reboot.bat as well.

How do i solve it: i will have to manually restart my rig and sometimes i will have to do it 2 - 3 times till it detects again.

Any idea how to fix this problem or anyway to allow the system to restart upon facing not being able to detect GPUs?

Please help me out guys.

Thank you!

Reinstall GPU drivers

May i know what's the best driver to use?

I'm using 372.54 NVIDIA driver which is recommended by Claymore himself.
but still having problems now and then for unable to detect gpu after system rebooting.

I always use latest drivers. My rigs never crash, dont slowdown and I get same or better hashrate than previous versions (yes, I always install the latest).
Im currently using etherminer with my Nvidia cards but I never had a single problem with Claymore (any versions) dual or not.

Hi,

thanks for replying.

so i assumed you are using the latest NVIDIA driver 385.28?

is it working fine for claymore miner ?
because i have previously tried upgrading to higher drivers and after a 10mins run, it gives me a gpu error.

i tried to troubleshoot and ended up rolling back my drivers and found this workable driver which is 372.54.
But however, it still have some problem whenever my system restarts, it cant detect the gpu.

Do you think it may not be just driver issues?

last time I used Claymore (9.8 over Windows 10 64bit) with my Nvidia cards, I was using version 384.94 since the day it was released and I had no issue. Those cards are still running that version but with etherminer but thanks to you, I will upgrade today

.

I dont plan to go back to Claymore with those cards for now but Ill run a 60 minutes test and report back.

reporting back, no crash while dual mining Sia. Same hashrate too.

Can i know how many GPUs and what GPUs do you have?

Also, what watt PSU are you using right now?

I'm running at around 1000watt on a 1050watt PSU.
Not sure is this the reason why it has problem detecting my GPU whenever the system restarts.

Or its just purely driver issue.

Havane

jr. member

Activity: 76

Merit: 3

Quick feedback : everything is stable with my 6 RX 480 rig, and the new AMD blockchain driver. With a modded bios, MSI afterburner for undervolting, I have 180 Mh/s back with ETH + DCR mining, instead of 160 Mh/s before Grin

KGV

newbie

Activity: 55

Merit: 0

WIN10 LTSB

1 Use DDU
2 Manual install
3 Patch
GO!

Also MSI Afterburner 4.4.0 Beta 16

oslak

sr. member

Activity: 273

Merit: 250

Quote from: KGV on August 17, 2017, 10:44:22 PM

DAG FIX

http://imgur.com/a/wDraV

Overdrive

http://forums.guru3d.com/showthread.php?t=416116

Dont forget atikmdag-patcher-1.4.5 after installing

What OS? doesn't work even after applying patch on windows 7.

KGV

newbie

Activity: 55

Merit: 0

DAG FIX

http://imgur.com/a/wDraV

Overdrive

http://forums.guru3d.com/showthread.php?t=416116

Dont forget atikmdag-patcher-1.4.5 after installing

stoniestfool

full member

Activity: 234

Merit: 100

Quote from: Myth888 on August 17, 2017, 09:38:34 PM

Quote from: stoniestfool on August 17, 2017, 07:50:06 PM

I have a problem. If I install any driver higher than 16.11 and start msi my hashrate is always 4 mhs on all cards. I know this is stuck in low power stat at 300/300. I can set all options in the .bat and they work fine on higher drivers. I do have setx's set in my bat.I am also using 9.8 but every version gives the same result. Msi running makes all card stay at 4mhs. I tried changing options in msi. Including kernal/user mode, voltage enable/disable,disable dsp,extend overclocking ect. Any idea's?
I was getting windows 10 error that graphic process was being limited. I google that and changed regit to have tdrdelay of 8. That did not fix it either. I do have 32 gb of virtual memory set.

have you updated your windows 10?
I think it did auto update before I disabled that wit dws. That the problem?

Myth888

full member

Activity: 343

Merit: 102

Quote from: stoniestfool on August 17, 2017, 07:50:06 PM

I have a problem. If I install any driver higher than 16.11 and start msi my hashrate is always 4 mhs on all cards. I know this is stuck in low power stat at 300/300. I can set all options in the .bat and they work fine on higher drivers. I do have setx's set in my bat.I am also using 9.8 but every version gives the same result. Msi running makes all card stay at 4mhs. I tried changing options in msi. Including kernal/user mode, voltage enable/disable,disable dsp,extend overclocking ect. Any idea's?
I was getting windows 10 error that graphic process was being limited. I google that and changed regit to have tdrdelay of 8. That did not fix it either. I do have 32 gb of virtual memory set.

have you updated your windows 10?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 661. (Read 6590565 times)