Claymore,
-ethi values are from 0 to 8 and those negatives described on readme file?
Thanks
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 969. (Read 6590565 times)
April 06, 2017, 01:29:09 PM
April 06, 2017, 01:15:09 PM
@Claymore, what does it mean? Which GPU? There are 6 ones. Why? ( I expect GPU5 because of the temperature, but...
Every GPU has two threads.
April 06, 2017, 01:11:30 PM
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
750w is short for 4 470 on dual !I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
For dual mining, if not undervolt, it needs at least 850W.
My seasonic 750w gold kept up for the last week dual mining gpu-z showing 110w for each card. Now they are undervolted. You mean this is not good for longterm? Mind you i have 4 cards not 6.
Well ive been mining for a week with old settings dual mining gpu-z showing 110w for each card no problem. How will you explain this? They are even undervolted now.
April 06, 2017, 01:04:12 PM
@Claymore, what does it mean? Which GPU? There are 6 ones. Why? ( I expect GPU5 because of the temperature, but...
v9.0
v9.0
Code:
18:01:13:672 d78 ETH: GPU0 28.221 Mh/s, GPU1 28.234 Mh/s, GPU2 28.234 Mh/s, GPU3 28.225 Mh/s, GPU4 27.614 Mh/s, GPU5 0.000 Mh/s
...
18:01:21:329 13a8 GPU0 t=74C fan=94%, GPU1 t=71C fan=66%, GPU2 t=73C fan=75%, GPU3 t=73C fan=96%, GPU4 t=72C fan=65%, GPU5 t=57C fan=20%
18:01:21:329 13a8 em hbt: 0, dm hbt: 0, fm hbt: 78,
18:01:21:329 13a8 watchdog - thread 0, hb time 141
18:01:21:329 13a8 watchdog - thread 1, hb time 63
18:01:21:329 13a8 watchdog - thread 2, hb time 141
18:01:21:344 13a8 watchdog - thread 3, hb time 63
18:01:21:344 13a8 watchdog - thread 4, hb time 0
18:01:21:344 13a8 watchdog - thread 5, hb time 78
18:01:21:344 13a8 watchdog - thread 6, hb time 94
18:01:21:360 13a8 watchdog - thread 7, hb time 31
18:01:21:360 13a8 watchdog - thread 8, hb time 63
18:01:21:360 13a8 watchdog - thread 9, hb time 0
18:01:21:360 13a8 watchdog - thread 10, hb time 16688
18:01:21:360 13a8 watchdog - thread 11, hb time 16672
18:01:21:376 13a8 WATCHDOG: GPU error, you need to restart miner :(
April 06, 2017, 12:53:45 PM
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
750w is short for 4 470 on dual !I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
For dual mining, if not undervolt, it needs at least 850W.
April 06, 2017, 12:50:29 PM
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
750w is short for 4 470 on dual ! I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
April 06, 2017, 12:35:23 PM
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
Hashing 119.5 ETH and 2870 DCR with this rig. Nanopool reports around 118.5 ETH 2Hour average. I guess that is because gpu3 is sometimes going idle for a mili sec. But i wont bother trying to fix it.
-ethi 15 -dcri 24
at dcri 25 it starts to affect eth speeds.
http://imgh.us/17837491_10155108274987719_1268440587_o.png
Here is the screenshot.
Hope this helps.
What do you predict the total consumption from the wall would be? I have 1 module 4gb ddr3 ram and phenom x2 240 as cpu.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
Hashing 119.5 ETH and 2870 DCR with this rig. Nanopool reports around 118.5 ETH 2Hour average. I guess that is because gpu3 is sometimes going idle for a mili sec. But i wont bother trying to fix it.
-ethi 15 -dcri 24
at dcri 25 it starts to affect eth speeds.
http://imgh.us/17837491_10155108274987719_1268440587_o.png
Here is the screenshot.
Hope this helps.
What do you predict the total consumption from the wall would be? I have 1 module 4gb ddr3 ram and phenom x2 240 as cpu.
April 06, 2017, 10:42:55 AM
29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470
Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing
Samsung memory - 90 w per card in after burner.
Are speeds fluctuating as hell?
90w in AB means something like 130-140w in reality from wall.
second rig 180-182mhs eth with 6 cards and 4200mhs dcr . pwr from wall under 1000w in ab per card is 86w
April 06, 2017, 10:22:56 AM
29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470
Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing
Samsung memory - 90 w per card in after burner.
Are speeds fluctuating as hell?
90w in AB means something like 130-140w in reality from wall.
April 06, 2017, 10:15:32 AM
29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470
Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing
Samsung memory - 90 w per card in after burner.
April 06, 2017, 09:58:57 AM
29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470
Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing
April 06, 2017, 09:40:36 AM
29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470
April 06, 2017, 08:56:01 AM
Another question; -ethi max value is 8? so only decrease setting is possible to fine tunning.
It's not 16 ?
April 06, 2017, 08:41:15 AM
No improvement for me in ETH Mining mode with RX 480
Same to me.
April 06, 2017, 08:34:24 AM
My results for far with Sapphire RX 480 8GB Nitro+
29.3 Mh/s ETH + 880 Mh/s Decred - Using -dcri 30
But, having problems with fluctuating, Speed drops from time to time for about 5-8%
Had the same problems on 8.1 also, probably my noob bios memory straping thing
@Claymore
a very good update, thanks a lot. Can finaly move decred back to Nicehash.
BTW, i was using Zpool for Decred while it didn't work on nice hash and i gotta tell ya, that Zpool has some strange payouts indeed, sometime i got a lot more than i expected, then nothing for a whole week, very strange
29.3 Mh/s ETH + 880 Mh/s Decred - Using -dcri 30
But, having problems with fluctuating, Speed drops from time to time for about 5-8%
Had the same problems on 8.1 also, probably my noob bios memory straping thing
@Claymore
a very good update, thanks a lot. Can finaly move decred back to Nicehash.
BTW, i was using Zpool for Decred while it didn't work on nice hash and i gotta tell ya, that Zpool has some strange payouts indeed, sometime i got a lot more than i expected, then nothing for a whole week, very strange
My results for PowerColor RX 480 8g (mod bios):
29.05 ETH + 900 Decred using -dcri 31
but I have the same problem with fluctuating speed drop from 29 to 21 and 21 to 29. I have no problem in 8.1 any clue of what can be happen?
Another question; -ethi max value is 8? so only decrease setting is possible to fine tunning.
BTW, I am using ethos (linux)
Pennywis3, zpool have few miners so reward is high but not always they found a block then payment is not regular. I was mining at zpool but move to coinmine for less rewards but more stable
April 06, 2017, 07:52:14 AM
What is going on with the failed to mine dev fee?
April 06, 2017, 07:49:50 AM
so far ive settled on..
the rx 470s with samsung ram, 1000/1750 dcri 25.. its 24mhs/600mhs pretty stable.
the rx 470s with hynix ram, 1000/1750 dcri 30.. its 22mhs/650mhs pretty stable.
it doesnt matter what i put dcri at with the hynix cards, the eth stays about the same.. just dcr goes up and the card gets hotter. the samsung cards if i raise dcri dcr goes up but eth goes down.
the eth speeds are about the same as 8.1 but the dcr speeds have more than doubled..
the cards are stock, im not going to flash the bios. upping the ram to 1850 yield very little in the terms of faster speeds.. the hynix one actually gets slower. the core clock doesnt seem to do anything.. altho if you go too low it makes the mouse move funny..
so all together im averaging about 91mhs eth and 2500mhs on dcr.. with 4 rx 470 armor 4g.
the rx 470s with samsung ram, 1000/1750 dcri 25.. its 24mhs/600mhs pretty stable.
the rx 470s with hynix ram, 1000/1750 dcri 30.. its 22mhs/650mhs pretty stable.
it doesnt matter what i put dcri at with the hynix cards, the eth stays about the same.. just dcr goes up and the card gets hotter. the samsung cards if i raise dcri dcr goes up but eth goes down.
the eth speeds are about the same as 8.1 but the dcr speeds have more than doubled..
the cards are stock, im not going to flash the bios. upping the ram to 1850 yield very little in the terms of faster speeds.. the hynix one actually gets slower. the core clock doesnt seem to do anything.. altho if you go too low it makes the mouse move funny..
so all together im averaging about 91mhs eth and 2500mhs on dcr.. with 4 rx 470 armor 4g.
April 06, 2017, 07:04:13 AM
@Claymore. You mentioned up to 8% speed up for R9 Nano. What ethi and dcri do you use?
Stock Powercolor Nano: -mode 1 -powlim 50 -dcri 120. 29.58MH/s. v8.1 shows 27.25MH/s for same drivers (15.12).
April 06, 2017, 06:40:52 AM
For RX 470 cards mining solo ETH, put -asm 1 -dcri 8
I have sapphire's with samsung, and xfx with hynix, on both cards dcri 8 is the best.
I have sapphire's with samsung, and xfx with hynix, on both cards dcri 8 is the best.
April 06, 2017, 06:12:29 AM
No improvement for me in ETH Mining mode with RX 480
Jump to: