Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 971. (Read 6590718 times)
April 05, 2017, 11:46:46 PM
Sapphire rx470 4gb ETH only mode: -dcri 10 I have +5%
April 05, 2017, 10:54:02 PM
Can risers with SATA connectors handle ETH+Dcr power use at default (no underclocking)?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
I would recommend looking into some sort of under-volting/underclocking if going this route. I have been testing dual mining on a 5xRX470 rig and power draw went from ~600 watts Eth only to ~800 watts ETH+DCR. I am using a modified vbios with -100 mv undervolt and not pushing the clocks too hard (1100/1850), so I would expect default settings to be a lot more power hungry.
April 05, 2017, 09:42:04 PM
Can risers with SATA connectors handle ETH+Dcr power use at default (no underclocking)?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
470s should be fine, 480s might get hot (assuming your talking about adapters). dont put more than 2 per cable. run it, then after a few minutes, check if the wires are hot. check a few times over the first day just to be sure. if they arent hot, you are good. if they are really warm, then you need to change your setup
April 05, 2017, 09:39:41 PM
Can risers with SATA connectors handle ETH+Dcr power use at default (no underclocking)?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
April 05, 2017, 09:28:54 PM
28 now. Il do more tweaking tomorrow.
April 05, 2017, 09:21:56 PM
What are you setting the DCRI to? 25?
April 05, 2017, 09:09:46 PM
Testing right now. 29.6 Mh/s per card for ETH and 415 Mh/s for DCR . RX 470 4GB 88w on ab. I will play with settings tomorrow. I think i can get more mh/s for both dcr and eth, but im 
sleepy right now .
sleepy right now . April 05, 2017, 07:47:27 PM
Best miner update so far. Dual mining Nitro+ 470 8GB - from 30eth/495dcr, now 30.6eth/695dcr, wattage increase only 8 watts per gpu. 270X - again 200dcr increase in dual with expanse. Thanks, Claymore!
April 05, 2017, 07:16:26 PM
Rx 480 8Gb
Doing 30 on eth and 750 on Dcr, Dcri 25 , best value so far
Doing 30 on eth and 750 on Dcr, Dcri 25 , best value so far
April 05, 2017, 06:51:15 PM
Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
+1 on this lol
Dont really want to put this on claymores thread, but you could try this one out. Im not mining with my CPU on xmr so idk but its good to try all options.
http://www.cryptominingtalk.com/xmr-stak-cpu-miner/
April 05, 2017, 06:16:55 PM
Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
+1 on this lol
April 05, 2017, 05:53:16 PM
THX very much Claymore. My DCR speed at -dcri 40 almost doubled, while ETH only lost about 0.5 Ms/s.
Great work!!! Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
Great work!!! Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
April 05, 2017, 05:42:24 PM
whats everyone getting with claymore9 on the rx480 8gb oc? unmodded bios
2* rx480 8GB stock with -dcri 42 getting 46-47MH eth 1950-1960Mh Dcr still playing to find most stable value
8gb-sapphire-radeon-rx-480-nitroplus-oc-14nm-polaris-pcie-30-8000mhz-gddr5-1208mhz-gpu-1342mhz-boost cards, ones running the display so giving slightly lower hashes otherwise itd be ~48/~2000
April 05, 2017, 04:15:40 PM
25
April 05, 2017, 04:09:04 PM
whats everyone getting with claymore9 on the rx480 8gb oc? unmodded bios
April 05, 2017, 04:00:57 PM
Hey guys, help me out when i mine on qtminer with 1x rx480 and 2x geforce gtx 980 i get 70mh/s for eth and when i turn on claymore dual mining eth + pasc i get only 30 mh/s, it says 1 maining 25mh/s and other two 3mh/s eatch. Any ideas whats wrong?
April 05, 2017, 03:42:52 PM
Hmm, i tested newest clyamore 9 on my RX470 and i see performance decreese from 171 to 167 MH
I will do more tests.
I will do more tests.
If you read the initial post it implied dcri was needed to get it tuned right even in ETH only mode. It seems like that is indeed the case when it uses ASM kernels, without tuning it will slow down, you need to set dcri to something lower than the built in default.
April 05, 2017, 03:37:57 PM
Hmm, i tested newest clyamore 9 on my RX470 and i see performance decreese from 171 to 167 MH
I will do more tests.
OLD CLAYMORE 8.1
NEW CLAYMORE 9
What do you think guys about this ? Is it only numbers and real speed is the same or is it worse speed ?
I will do more tests.
OLD CLAYMORE 8.1
NEW CLAYMORE 9
What do you think guys about this ? Is it only numbers and real speed is the same or is it worse speed ?
April 05, 2017, 03:26:04 PM
Hawaii hits powerlimit wall badly, I know those could be clocked higher but powerlimiter kicks in even with +50, DCR is +33% before that wall.
Best I can do is 31.8ETH + 1200DCR, need hardware mod to go higher (and heavier cabling+connectors too).
Best I can do is 31.8ETH + 1200DCR, need hardware mod to go higher (and heavier cabling+connectors too).
April 05, 2017, 03:23:21 PM
Thanks Claymore, I didnt think perf improvement was possible for ETH anymore, but v9.0 give me a flat 2% Increase across all my RX 470 4GB Cards, now running at 26mh/s at just under 95W from the wall 
Jump to: