Anyone know what's best profitable pool for decred?
Coinmine.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 970. (Read 6590718 times)
April 06, 2017, 05:04:09 AM
Coinmine.
April 06, 2017, 04:45:48 AM
Anyone know what's best profitable pool for decred?
April 06, 2017, 04:43:06 AM
@Claymore. You mentioned up to 8% speed up for R9 Nano. What ethi and dcri do you use?
April 06, 2017, 04:31:17 AM
My results for far with Sapphire RX 480 8GB Nitro+
29.3 Mh/s ETH + 880 Mh/s Decred - Using -dcri 30
But, having problems with fluctuating, Speed drops from time to time for about 5-8%
Had the same problems on 8.1 also, probably my noob bios memory straping thing
@Claymore
a very good update, thanks a lot. Can finaly move decred back to Nicehash.
BTW, i was using Zpool for Decred while it didn't work on nice hash and i gotta tell ya, that Zpool has some strange payouts indeed, sometime i got a lot more than i expected, then nothing for a whole week, very strange
29.3 Mh/s ETH + 880 Mh/s Decred - Using -dcri 30
But, having problems with fluctuating, Speed drops from time to time for about 5-8%
Had the same problems on 8.1 also, probably my noob bios memory straping thing
@Claymore
a very good update, thanks a lot. Can finaly move decred back to Nicehash.
BTW, i was using Zpool for Decred while it didn't work on nice hash and i gotta tell ya, that Zpool has some strange payouts indeed, sometime i got a lot more than i expected, then nothing for a whole week, very strange
April 06, 2017, 04:30:48 AM
im having a hard time trying to find a good spot for my hynix rx 470s it seems lower with ETH no matter what i put it, but the samsung ones 25 is good, its 24 mhs ETH and 600 mhs DCR
April 06, 2017, 03:49:26 AM
Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
+1 on this lol
Dont really want to put this on claymores thread, but you could try this one out. Im not mining with my CPU on xmr so idk but its good to try all options.
http://www.cryptominingtalk.com/xmr-stak-cpu-miner/
323 h/s on a 17 7700K.
April 06, 2017, 03:30:58 AM
I see a little gain on my rx 480 sapphires
-dcri 9 if I go any higher or lower I see a drop
Whilst its only a small gain maybe 1mh/s in total
My main concern is the remote manger not working in V9 its very important for me that I can monitor my rigs.
So at the moment I can not use V9 .
-dcri 9 if I go any higher or lower I see a drop
Whilst its only a small gain maybe 1mh/s in total
My main concern is the remote manger not working in V9 its very important for me that I can monitor my rigs.
So at the moment I can not use V9 .
April 06, 2017, 03:21:09 AM
Personally, I have no hashrate gain with version 9.
Eth + pasc.
-dcri 17
I noticed a drop in consumption on my rig rx480 reference, -20 to 30 watt on rig.
But nothing with my rig nitro +.
Eth + pasc.
-dcri 17
I noticed a drop in consumption on my rig rx480 reference, -20 to 30 watt on rig.
But nothing with my rig nitro +.
April 06, 2017, 02:57:55 AM
I also noticed speed drop for sapphire nitro+ rx480 oc for all my gpus
v8.0 29.9mh/s
v9.0 29.5mh/s
I am using modded bios with gpu 1150 / mem 2150.
v8.0 29.9mh/s
v9.0 29.5mh/s
I am using modded bios with gpu 1150 / mem 2150.
April 06, 2017, 02:23:59 AM
Anyone else having problems with remote monitor with V9 or is it just me?
Am I missing some new settings or something?
I input my rigs i.p and leave the remote port of default 3333
Am I missing some new settings or something?
I input my rigs i.p and leave the remote port of default 3333
April 06, 2017, 02:22:31 AM
asm mode making hash worse on tonga.
altough on rx 470's i got a +0.4mhs speedup per card which is nice.
altough on rx 470's i got a +0.4mhs speedup per card which is nice.
April 06, 2017, 02:17:55 AM
THX very much Claymore. My DCR speed at -dcri 40 almost doubled, while ETH only lost about 0.5 Ms/s.
Great work!!! Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
Great work!!! Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.
Picture or never happened.
April 06, 2017, 02:12:23 AM
Have you found a difference of hash with rth + pasc?
April 06, 2017, 02:11:13 AM
Can risers with SATA connectors handle ETH+Dcr power use at default (no underclocking)?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
Whether you ETH solomine, dual mine, or even overclock your RX series it makes no difference in the amount of power from the PCIe motherboard slot because it only powers the memory, the rest is taken from your PCIe 6/8 pin power.
I think it always used 50 Watts last time I measured the current.
In my opinion 50 Watts is too much going thru SATA. It was ok with a R9 280X because those used max 25 Watts from the SATA connection, with a RX its never a good idea.
April 06, 2017, 01:55:14 AM
V9 claymore
Remote manager v 2.8 I'm having a few issues with this.
On V2.6 I can set up the remote manager on a different pc and monitor all my rigs on it.
But with V9 claymore I can no longer monitor them . I have tried running v2.8 remote manager on my "controller pc" but its not detecting my miner. V2.6 does not work either with V9 claymore.
If I run the remote manager on the rig itself then the remote manager detects the rig. But inputting the same rig information on to the remote manager on a different pc on the same network the remote manager see's nothing and shows my rig as off line.
Remote manager v 2.8 I'm having a few issues with this.
On V2.6 I can set up the remote manager on a different pc and monitor all my rigs on it.
But with V9 claymore I can no longer monitor them . I have tried running v2.8 remote manager on my "controller pc" but its not detecting my miner. V2.6 does not work either with V9 claymore.
If I run the remote manager on the rig itself then the remote manager detects the rig. But inputting the same rig information on to the remote manager on a different pc on the same network the remote manager see's nothing and shows my rig as off line.
April 06, 2017, 01:52:40 AM
So , even in eth-only mod need to tune dcri to get max eth-speed ?
April 06, 2017, 01:51:20 AM
I keep getting invalid on dcr share and not even one share valid 
, try everything even using at stock clock test V9 at -dcr 5 20 30 50 all them same result. eth share is fine
it work fine on v8.1
test using rx480 8gb
, try everything even using at stock clock test V9 at -dcr 5 20 30 50 all them same result. eth share is fine it work fine on v8.1
test using rx480 8gb
April 06, 2017, 12:32:13 AM
Hmm, i tested newest clyamore 9 on my RX470 and i see performance decreese from 171 to 167 MH 
I will do more tests.
OLD CLAYMORE 8.1
NEW CLAYMORE 9
What do you think guys about this ? Is it only numbers and real speed is the same or is it worse speed ?
Worse speed due to driver. I already told him about the diff 470/480 in linux/windows, while 470 appears to perform better on linux, 480 does better on windows, that was only seen in his miner.I will do more tests.
OLD CLAYMORE 8.1
NEW CLAYMORE 9
What do you think guys about this ? Is it only numbers and real speed is the same or is it worse speed ?
Sgminer and Zawawa's GG did the same for 470s. That being said I think my 470s are now losing ~1MH and power usage is normal again.
MSI Armor 470 4G Samsung memory: GPU3 28.685 Mh/s at 1126/2050 cl v9.0, GPU3 29.462 Mh/s same clocks v8.1, 28.7 GG v1.0-pre6 with asm enabled.
April 06, 2017, 12:04:43 AM
Sapphire rx470 4gb ETH only mode: -dcri 10 I have +5%
what about power use?
you basically just added
-mode 1 -dcri 10 to the bat file (win) or command in Ubuntu?
right?
April 05, 2017, 11:59:04 PM
Can risers with SATA connectors handle ETH+Dcr power use at default (no underclocking)?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
I have power reserves, but afraid that risers might give up.
Anybody with sapphire Nitro 470RX 4gb, 8gb and/or MSI RX 470 4gb gaming X ON RISERS doing this double mining at the default power?
Yes you can dual mine even high intensity with powered risers.
I try not to use more than one cable per riser. I don't like putting 2 risers on one connection.
Jump to: