Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 984. (Read 6590565 times)

No i just figured i had done something wrong since when you don´t mine a second coin, the hashrate should go up instead of staying the same? I´ll try -dcri. thanks for the tip

Thank you, it's already a reference.

https://forum.ethereum.org/discussion/comment/69219#Comment_69219

does this version works with nvidia GTX 660 2GB?

Could you report the consumption of gpu-z on a board?
With 100W with peaks of 31MH / S not costly

Can someone help? I am getting the following error message

ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...


I am using this as an input

ETH: Stratum - Connected (zec-eu1.dwarfpool.com:3333)
21:51:07:061   7d4   got 150 bytes
21:51:07:069   7d4   buf: {"error": [-3, "Method name parsing failed. You *must* use format ., e.g. 'example.ping'", null], "id": 2, "result": null}

21:51:07:076   7d4   parse packet: 130
21:51:07:083   7d4   ETH: Authorization failed
: {"error":[-3,"Methodnameparsingfailed.You*must*useformat.,e.g.'example.ping'",null],"id":2,"result":null}
21:51:07:091   7d4   buf was cleared
21:51:07:109   7d4   Stratum - reading socket failed 10038, disconnect
21:51:07:116   7d4   ETH: Job timeout, disconnect, retry in 20 sec...

buf: {"error": [-3, "Method name parsing failed. You *must* use format ., e.g. 'example.ping'", null], "id": 2, "result": null}

21:39:35:672   25d8   parse packet: 130
21:39:35:679   25d8   ETH: Authorization failed
: {"error":[-3,"Methodnameparsingfailed.You*must*useformat.,e.g.'example.ping'",null],"id":2,"result":null}
21:39:35:687   25d8   buf was cleared
21:39:35:705   25d8   Stratum - reading socket failed 10038, disconnect
21:39:35:713   25d8   ETH: Job timeout, disconnect, retry in 20 sec...

buf: {"error": [-3, "Method name parsing failed. You *must* use format ., e.g. 'example.ping'", null], "id": 2, "result": null}

21:39:35:672   25d8   parse packet: 130
21:39:35:679   25d8   ETH: Authorization failed
: {"error":[-3,"Methodnameparsingfailed.You*must*useformat.,e.g.'example.ping'",null],"id":2,"result":null}
21:39:35:687   25d8   buf was cleared
21:39:35:705   25d8   Stratum - reading socket failed 10038, disconnect
21:39:35:713   25d8   ETH: Job timeout, disconnect, retry in 20 sec...


can somebody write me config ?

-epool stratum.f2pool.com:8888
-ewal "xxxxx"
-eworker "xxxx".ltc
-epsw x
-dpool stratum+tcp://yiimp.ccminer.org:4252
-dwal "XXX"
-dpsw x
-esm 1
-mode 0
-tt 70

Hallo can somebody help me with start mining eth . ?  i have f2pol worker but its crash when i use  -eworker "xxxx".ltc
º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v8.1      º

      This pool (stratum.f2pool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
21:26:58:238   9bc   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
21:26:58:246   9bc   Please read "Readme" file for details
21:26:58:254   9bc   This pool (stratum.f2pool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
21:26:58:262   9bc   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
21:26:58:271   9bc   Please read "Readme" file for details
21:26:58:281   9bc   Pool stratum.f2pool.com removed from the list
21:26:58:290   9bc   ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.

MSI Z170s had problem to serve more than 4 GPU. Maybe new bios fixed that. Also celeron 3900 is sufficient. 6x480s are best option ( half heat than 4x390 ) and 1300w is best. Good luck.

As much as I like the 390 for the brute power keep in mind that a 1300 is barely capable of powering 4 of those, forget about dual mining with it, it would be better for you to have it work at 220 volts, it more efficient at that voltage, then you have the issue of your instalation, we are talking about 10 amps, that times 2 is more than a regular house socket is disigned to work at.
Add to that the fact that they run hot, very hot.

That is if they find us, is an underground operation now

McAfee Antivirus started aggressively marking both Claymore and Genoil as an Artemis trojans and quarantining folders on Win10.
Manually telling it to "restore" does not seem to work/stick.
Just wanted to let you know, I know that it is not.

I hope you have read this article and will take appropriate measures

https://www.forbes.com/sites/timworstall/2017/01/27/congratulations-to-venezuela-bitcoin-miners-arrested-for-stealing-free-electricity/#33e783214b03

On your question on what to buy. I personally would suggest to wait for Radeon Vega to be released which will have better ratings.

From OP or Readme:

-retrydelay   
          delay, in seconds, between connection attempts. Default values is "20". Specify "-retrydelay -1" if you don't need reconnection, in this mode miner will exit if connection is lost.

I've 6 gpus hashing around 29.3 using Jukebox bios. I've bought 3 additional gpus from local store (all same brand models)
I've tried to flash same bios to those new cards but Atiflash fails to flash 512kb bios file. However it is able to flash Boysie's 256kb low power bios.
Jukebox (512kb) low power bios is providing 0.3 MH more per card. So if we have any way to flash those cards with 512kb bios I'm open to recommendations.

I have a curious problem on one machine that has been hashing flawlessly for almost 8 months now.

One RX 470 4Gb just dropped to 14mh/s from the regular 27mh/s. And no matter what I do it, reset BIOS, change clocks, increasing volts, DDU wipe, it just wont go back up. On a system reset it sometimes starts hashing at 18 but settles back at 14 in a few rounds.

Could it be a dying card? Has anyone ever encountered a card going bust such that its hashing continues but at a lowered rate?

How much for this ROM?

it is probably just one card. Find which one and mod its bios with less agressive timings. it will hash less but hang less.

Hi all,

Compare to nicehash which one actually mine more compare to now ratio.