Any advice, how would I get this to auto start up when Windows 10 starts up?
Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 295. (Read 3839163 times)
Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.
Any advice, how would I get this to auto start up when Windows 10 starts up?
I'm using this one
http://www.z-cron.com/
windows task scheduler doe's not work for me
Any advice, how would I get this to auto start up when Windows 10 starts up?
Been mining with v9.1 so far it is stable, i also order this baby from ebayto try out because my MB has only 4 pci-e slots. so i got this to add more GPU!
The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.
See installation or you can Order here ->
http://tinyurl.com/gmclx9n
The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.
See installation or you can Order here ->
http://tinyurl.com/gmclx9n Which mobo are you using? Z170 chipset??
i got a board that also only allows four cards , do u have to supply power
to it cia the sata cable?
same like pluging into your sata power. no need extra power supply.
Claymore, you are awesome!
i have 3 rigs with rx 480, 390, 390x and 7990 all working fine thc Claymore
whats your hashrate with 7990?
Quote from: tide881155 on December 22, 2016, 10:32:25 PM
I have just 225 s/h on my ref rx 480 8gb. I am using eliovp rom... Energylowok. Plz who can help to link rom atleast ~245 s/h? I have two kids, i do not have any time for experimenting with timing with my 34 rx 480:(
Look here or ask here https://forum.z.cash/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/8347 for zec Mining modded bios .
you can get some real good help here with no Issues. id offer some help but my bios is custom, i did it my self for a power color red dragon 480 4gb and don't like offer to do it for anyone for reason beyond my control that card was a bitch to get just right .
I even bricked it a few times trying different bios setting.
How did u get this hashes on 480???265-270! omg... did u use reference one?
me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards thats got to be hard and take lot of time to set up right.
I'll stay with windows because end the end they all about the same .
With Linux you'll need Tahiti, R9 280 or better cards, for easier setup with the RX series, weird though that they choose to leave the 78xx/ 79xx of Tahiti's out though.
SO the drivers work with the R9 280 non X version that work with the RX 400 series now ?. and your right it depends on what card you are trying to use .
.
I haven't tired the new amdgpupro drivers yet or looked at what they support with 16.5 some thing or some thing like that.
I'll check .
thanks top .
I have just 225 s/h on my ref rx 480 8gb. I am using eliovp rom... Energylowok. Plz who can help to link rom atleast ~245 s/h? I have two kids, i do not have any time for experimenting with timing with my 34 rx 480:(
Look here or ask here https://forum.z.cash/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/8347 for zec Mining modded bios .
you can get some real good help here with no Issues. id offer some help but my bios is custom, i did it my self for a power color red dragon 480 4gb and don't like offer to do it for anyone for reason beyond my control that card was a bitch to get just right .
I even bricked it a few times trying different bios setting.
RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
How did u get this hashes on 480???265-270! omg... did u use reference one?
me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards thats got to be hard and take lot of time to set up right.
I'll stay with windows because end the end they all about the same .
SO the drivers work with the R9 280 non X version that work with the RX 400 series now ?. and your right it depends on what card you are trying to use .
.I haven't tired the new amdgpupro drivers yet or looked at what they support with 16.5 some thing or some thing like that.
I'll check .
thanks top .
v9.2
280x ~220H/s
390 ~325H/s
290x ~315H/s
Fury ~350H/s
480 ~260H/s
stock bios, overclocked, 16.10.3
280x ~220H/s
390 ~325H/s
290x ~315H/s
Fury ~350H/s
480 ~260H/s
stock bios, overclocked, 16.10.3
480 reference overclock?
his roaring oc
Anyone know why R7 370 has 4GB's of ram but reports as 3GB's with this miner was doing this in earlier versions as well?
Why - no idea. And yes, it has been so in all versions
I think, that Claymore can stop develop new version of miner. This h|s is ok. Yeap?
If he still getting developer fee then he should still develop more
To use analogy - if you are going to cinema to see your favorite movie second or third time, do you expect to see new version of it each time?
I have just 225 s/h on my ref rx 480 8gb. I am using eliovp rom... Energylowok. Plz who can help to link rom atleast ~245 s/h? I have two kids, i do not have any time for experimenting with timing with my 34 rx 480:(
Gpu load 96-97% is it regular or normal?
RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
How did u get this hashes on 480???265-270! omg... did u use reference one?
me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards thats got to be hard and take lot of time to set up right.
I'll stay with windows because end the end they all about the same .
I live problem with 9.2. Gpu0 crash in my 3 rigs. All of them 6 X 8 gb 470 nitro. I still use 9.0 without any problem. I think users who have 6 rx vga on their rigs have same problem.
RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
How did u get this hashes on 480???265-270! omg... did u use reference one?
me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards that's got to be hard and take a lot of time to set up right.
I'll stay with windows because end the end they are all about the same . and my RX 480 With 4 gb does 241 Sols with a moded bios using the latest patched drivers form AMD, in fact i run better with the new drivers while others claim they don't. if i add 4 GB, i should do about the same around 270 or 280 Sol under windows with a 480 8gb so with Linux that's no supersize to me.
Anyone know why R7 370 has 4GB's of ram but reports as 3GB's with this miner was doing this in earlier versions as well?
RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
How did u get this hashes on 480???265-270! omg... did u use reference one?
Any suggestions how to change 3x reconnect try to 1 (before fail over) and/or from 20secs to less, maybe 5 secs?
And maybe adding new functionality "shares time over".
If detected more than 200.000 shares submited and block still not found, than change pool?
And maybe adding new functionality "shares time over"
.If detected more than 200.000 shares submited and block still not found, than change pool?
I really don't get why I am seeing such bad speeds. I even tried different pools. Optiminer seems to work fine.
I'm getting a total of 765-770 sols in linux with 2x290s and a RX 470 8gb.
Its only 10 sols less then windows and its 730w on the wall. Do you guys think thats ok or it can be improved?
I had to overclock 290s by 10% though.
Its only 10 sols less then windows and its 730w on the wall. Do you guys think thats ok or it can be improved?
I had to overclock 290s by 10% though.
Jump to: