We have a fix. 2.1 will be coming out later today, right now we are syncing all the nodes up to it and making sure they connect properly. this fixes the 250,000 block stuck and everything should proceed normally after that.
a resync to the network will not be nessisary
we have also decided to change the PoS so that it remains at 25%.
Topic: ECCoin (ECC) Takeover by Trusted-Cryptos Team [Griffith] - page 33. (Read 91210 times)
Can't sync. Please help)
Currently working on a fix. please hold
Can't sync. Please help)
on another note. the mulitipool is done. once the website gets updated (tomorrow) i will start promoting it 
thanks for all the compliments. i appreciate all of the support. but i must admit, i messed up. as most of u can see right now we are stuck on block 249,999. this is because the POS is supposed to change on block 250,000.
i told it that before 250,000 to use 25% and after 250,000 to use my new formula. i never told it what to do on 250,000.... i forgot and = sign in the code, which means there needs to be another wallet update. im really sorry about this. i will upload the fix in a second, im really embarrassed i messed that up.....
so im sorry to do this to yu all again, but please update your wallets to the 2.0 fix (on the first post)
i told it that before 250,000 to use 25% and after 250,000 to use my new formula. i never told it what to do on 250,000.... i forgot and = sign in the code, which means there needs to be another wallet update. im really sorry about this. i will upload the fix in a second, im really embarrassed i messed that up.....
so im sorry to do this to yu all again, but please update your wallets to the 2.0 fix (on the first post)
OK, thanks. No problems, there will always need to be updates for all sorts of reasons: it is a work in progress.
eh, ill be happy once another block gets solved
thanks for all the compliments. i appreciate all of the support. but i must admit, i messed up. as most of u can see right now we are stuck on block 249,999. this is because the POS is supposed to change on block 250,000.
i told it that before 250,000 to use 25% and after 250,000 to use my new formula. i never told it what to do on 250,000.... i forgot and = sign in the code, which means there needs to be another wallet update. im really sorry about this. i will upload the fix in a second, im really embarrassed i messed that up.....
so im sorry to do this to yu all again, but please update your wallets to the 2.0 fix (on the first post)
i told it that before 250,000 to use 25% and after 250,000 to use my new formula. i never told it what to do on 250,000.... i forgot and = sign in the code, which means there needs to be another wallet update. im really sorry about this. i will upload the fix in a second, im really embarrassed i messed that up.....
so im sorry to do this to yu all again, but please update your wallets to the 2.0 fix (on the first post)
OK, thanks. No problems, there will always need to be updates for all sorts of reasons: it is a work in progress.
2.0 fix wallets are also in the release folder of the github. incase links dont work for you
thanks for all the compliments. i appreciate all of the support. but i must admit, i messed up. as most of u can see right now we are stuck on block 249,999. this is because the POS is supposed to change on block 250,000.
i told it that before 250,000 to use 25% and after 250,000 to use my new formula. i never told it what to do on 250,000.... i forgot and = sign in the code, which means there needs to be another wallet update. im really sorry about this. i will upload the fix in a second, im really embarrassed i messed that up.....
so im sorry to do this to yu all again, but please update your wallets to the 2.0 fix (on the first post)
i told it that before 250,000 to use 25% and after 250,000 to use my new formula. i never told it what to do on 250,000.... i forgot and = sign in the code, which means there needs to be another wallet update. im really sorry about this. i will upload the fix in a second, im really embarrassed i messed that up.....
so im sorry to do this to yu all again, but please update your wallets to the 2.0 fix (on the first post)
The 2.0 Wallet seems to be working very well.
Great Job.
Does anyone know when Comkort is going to get their exchange for eccoin working?
Thanks.
Great Job.
Does anyone know when Comkort is going to get their exchange for eccoin working?
Thanks.
Someone or better the dev should contact Comkort to update their ECC wallet to version 2.0 first. Otherwise Comkort will continue to disable all operations for ECC.
Anyway the version 2.0 wallet works well for me too. Thanks dev, we finally get a working wallet now.
Version 2.0, reindex and everything is working fine. Good job dev.
There are still people connecting with old wallets! Please do change to latest version!
Thanks, no more errors in wallet
The 2.0 Wallet seems to be working very well.
Great Job.
Does anyone know when Comkort is going to get their exchange for eccoin working?
Thanks.
Great Job.
Does anyone know when Comkort is going to get their exchange for eccoin working?
Thanks.
I made the update from 1.9.x to 2.0.0 this weekend.
My wallet could not sync further than block 240455 after upgrading.
I tried the usual suspects (restarting the wallet with and without.conf)...
I had those kind of errors in the debug.log:
The solution was to sync up from the scratch - which takes forever and a day
We clearly need more nodes to make this coin powerful again!
two ideas:
1)If your github code would support arm cpu's it would be easy to set up a eccoind node for everyone on a raspberry.
AFIAK you need to integrate an additional arm compatible scrypt code like this:
https://github.com/noncepool/cpuminer-yescrypt/blob/master/scrypt-arm.S
2)It would be great if the wallet would show some update notice (+download link?) if a newer release exists.
My wallet could not sync further than block 240455 after upgrading.
I tried the usual suspects (restarting the wallet with and without.conf)...
I had those kind of errors in the debug.log:
Code:
ERROR: CheckProofOfStake() : INFO: check kernel failed on coinstake 98093a547cbf560a80e188441ba86778c7d871d893637988071727df000c3c0a, hashProof=0f959e40f34b787120e4c2bd54db30fe711a405eab024052ff4a9a269e59bc01
WARNING: ProcessBlock(): check proof-of-stake failed for block 2761a6673326fb67b6c0130d0c3987c9a2f223bfbd7bff94f93350b3f7280bae
received block 196ede54bbf094c98615
WARNING: ProcessBlock(): check proof-of-stake failed for block 2761a6673326fb67b6c0130d0c3987c9a2f223bfbd7bff94f93350b3f7280bae
received block 196ede54bbf094c98615
The solution was to sync up from the scratch - which takes forever and a day
We clearly need more nodes to make this coin powerful again!
two ideas:
1)If your github code would support arm cpu's it would be easy to set up a eccoind node for everyone on a raspberry.
AFIAK you need to integrate an additional arm compatible scrypt code like this:
https://github.com/noncepool/cpuminer-yescrypt/blob/master/scrypt-arm.S
2)It would be great if the wallet would show some update notice (+download link?) if a newer release exists.
actually that sync issue was a known problem and the reason for the update to 2.0. you probably forked yourself off of the chain. (it was a bug we found) and yes those would need to be a complete resync.
i will look into making it be able to be used on pi's but it isnt on the top of my list atm
I made the update from 1.9.x to 2.0.0 this weekend.
My wallet could not sync further than block 240455 after upgrading.
I tried the usual suspects (restarting the wallet with and without.conf)...
I had those kind of errors in the debug.log:
The solution was to sync up from the scratch - which takes forever and a day
We clearly need more nodes to make this coin powerful again!
two ideas:
1)If your github code would support arm cpu's it would be easy to set up a eccoind node for everyone on a raspberry.
AFIAK you need to integrate an additional arm compatible scrypt code like this:
https://github.com/noncepool/cpuminer-yescrypt/blob/master/scrypt-arm.S
2)It would be great if the wallet would show some update notice (+download link?) if a newer release exists.
My wallet could not sync further than block 240455 after upgrading.
I tried the usual suspects (restarting the wallet with and without.conf)...
I had those kind of errors in the debug.log:
Code:
ERROR: CheckProofOfStake() : INFO: check kernel failed on coinstake 98093a547cbf560a80e188441ba86778c7d871d893637988071727df000c3c0a, hashProof=0f959e40f34b787120e4c2bd54db30fe711a405eab024052ff4a9a269e59bc01
WARNING: ProcessBlock(): check proof-of-stake failed for block 2761a6673326fb67b6c0130d0c3987c9a2f223bfbd7bff94f93350b3f7280bae
received block 196ede54bbf094c98615
WARNING: ProcessBlock(): check proof-of-stake failed for block 2761a6673326fb67b6c0130d0c3987c9a2f223bfbd7bff94f93350b3f7280bae
received block 196ede54bbf094c98615
The solution was to sync up from the scratch - which takes forever and a day
We clearly need more nodes to make this coin powerful again!
two ideas:
1)If your github code would support arm cpu's it would be easy to set up a eccoind node for everyone on a raspberry.
AFIAK you need to integrate an additional arm compatible scrypt code like this:
https://github.com/noncepool/cpuminer-yescrypt/blob/master/scrypt-arm.S
2)It would be great if the wallet would show some update notice (+download link?) if a newer release exists.
it initial test of the multipool was a failure. after it was initially tested. i redid a large section of the database, changed the way the shares solved were stored, fixed connection issues and now we are up and running and as far as i can tell there is a normal amount of reject rates atm. so if you want to test just follow the instructions found here: http://www.primetimepool.net/Coins/Multipool/Getting%20Started.html
i would just like to state that during this time of testing, payment for shares solved is not guaranteed as i haven't fully tested the system yet. simple as that.
i would just like to state that during this time of testing, payment for shares solved is not guaranteed as i haven't fully tested the system yet. simple as that.
Hats Off to ya for picking this up and working to make something out of it.
I know its all hard work and I hope it will rise like crazy.
I know its all hard work and I hope it will rise like crazy.
Would like to donate half million ecc coin to the new dev for faucets or anything else they could use them for.
the min time is not 42 days anymore. your coins will stake. there are 18 billion coins. just be patient.
It would be encouraging to think that there are so many wallets open, that my coin weight is relatively low.
Interesting to see the change in the staking parameters, then. I have held 11 different PoS coins, and no others behaved this way: in my book, different is good.
+1 new logo is nice
Jump to: