GAW Community is located at: community.gawminers.com - page 22.

volder

full member

Activity: 238

Merit: 100

Quote from: healthandwealth on May 29, 2014, 09:54:19 AM

Quote from: vabchgent on May 29, 2014, 08:25:11 AM

Check at your pool make sure difficulty is set at 128 (possibly 256) at pool side and run miners against there own worker. Gridseeds loved anything under 128 so find the right Difficulty and as always mileage may vary.

So to rehash (heh) this thought...you'd say setting sets of 10 gridseeds at 128 difficulty then?

For people with a War Machine...what difficulty setting would you say is best to use?

The war machine likes higher diff. It works decent with 1024, but I use 4096 or 8192 most of the time for best results.

healthandwealth

full member

Activity: 138

Merit: 100

Quote from: vabchgent on May 29, 2014, 08:25:11 AM

Check at your pool make sure difficulty is set at 128 (possibly 256) at pool side and run miners against there own worker. Gridseeds loved anything under 128 so find the right Difficulty and as always mileage may vary.

So to rehash (heh) this thought...you'd say setting sets of 10 gridseeds at 128 difficulty then?

For people with a War Machine...what difficulty setting would you say is best to use?

volder

full member

Activity: 238

Merit: 100

Quote from: EvilPanda on May 29, 2014, 09:50:10 AM

Quote from: volder on May 29, 2014, 09:14:46 AM

Crud with everyone acting all happy-go-lucky and getting along I have no good material to read with my morning coffee. This getting along stuff is starting to make me sick. I need to find a way to fire up the reactor again...

Kidding! Glad we got it all worked out guys. Let's keep the peace.

This is still an option Cheesy

https://www.youtube.com/watch?v=oc_ZhdAJyOE

My email inbox was so clean this morning. I thought maybe gmail wasn't working.

EvilPanda

hero member

Activity: 658

Merit: 500

Small Red and Bad

Quote from: volder on May 29, 2014, 09:14:46 AM

Crud with everyone acting all happy-go-lucky and getting along I have no good material to read with my morning coffee. This getting along stuff is starting to make me sick. I need to find a way to fire up the reactor again...

Kidding! Glad we got it all worked out guys. Let's keep the peace.

This is still an option Cheesy

https://www.youtube.com/watch?v=oc_ZhdAJyOE

AtomicFrost

member

Activity: 92

Merit: 10

Quote from: badneck on May 29, 2014, 09:27:06 AM

My Fury ran great all night and is rolling along at 1.56Mh using ipoMiner. I was getting lots of stale shares last night so I increased share difficulty to 256. That seems to have helped.

1.56MH is really nice for the Fury unit. What frequency are you running it at, and what is your ratio of hardware error / accepted shares?

Edit: Also, is this with or without the Zenminer?

badneck

newbie

Activity: 10

Merit: 0

My Fury ran great all night and is rolling along at 1.56Mh using ipoMiner. I was getting lots of stale shares last night so I increased share difficulty to 256. That seems to have helped.

alienesb

hero member

Activity: 868

Merit: 1000

Has anyone tried to split the brick that comes with the Fury to see if it can handle 2 or three like we could with the Gridseeds? I use this: http://www.amazon.com/gp/product/B00CHEVM1I/ref=oh_details_o03_s01_i01?ie=UTF8&psc=1

volder

full member

Activity: 238

Merit: 100

Crud with everyone acting all happy-go-lucky and getting along I have no good material to read with my morning coffee. This getting along stuff is starting to make me sick. I need to find a way to fire up the reactor again...

Kidding! Glad we got it all worked out guys. Let's keep the peace.

EvilPanda

hero member

Activity: 658

Merit: 500

Small Red and Bad

Quote from: SDRebel on May 29, 2014, 08:36:17 AM

Quote from: EvilPanda on May 29, 2014, 07:16:24 AM

Quote from: ?? on ??

Quote from: EvilPanda on May 29, 2014, 06:58:53 AM

Hey reactor, are things ok with your order? Because you're happily posting here, while maintaining your "possible scam" thread. What's up with that?

My order is in Ohio, well technically en route from Ohio to NJ, meaning it should be delivered today. So my software is all built, I've got a zenBox with a disturbingly long network cable creatively running through three rooms in case I have any out-of-the-gate issues and need to plug that in, and if history is any lesson DHL will show up between 1-3, possibly knocking so hard as to wake my daughter up from her nap upstairs, and I'll be adding ~1.35M to my little whirring collection of hardware.

Right now I'm focusing on helping community members - hence the Zen thread in my signature. Not posting in any other threads regarding GAW. I've got pending questions that are being handled in private. Thanks.

That's great, so if you're happy with the services and nobody was actually scammed, I'd appreciate if you could close or delete the "possible scam" thread. Thank you.

it may be better id he instead tells in that thread that his accusations were unfounded and explains that while notwwithout bumps in the road, for the most part everyone is pretty happy

Not a bad idea, I'm ok with both. All companies, even the biggest ones, have some bumps. Think of Windows ME for example, that was one of the reasons people started using the word Microshit Cheesy

The thing is to keep it cool and work it out.

EasyME

newbie

Activity: 49

Merit: 0

Quote from: alienesb on May 29, 2014, 08:57:10 AM

I am not right now because it wasn't good to go yesterday. The little guy is pretty stable at Clever which can be finicky at times especially with rejects. I'm not sure it needs such a big fan but I look at it as an eye patch in keeping with it's name Wink

LOLs... thanks for the update.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: philipma1957 on May 28, 2014, 12:43:11 PM

okay first question I have is who has a working fury/zenminer in hand?

if you do what power does it pull? what does it hash?

I have played the new gear time over and over and over and over.

I decided to

a ) wait for real world reports on zemminer - gaw miner combo's

next question is their a support thread for this on this site.

It would be in script/alt coins. but a thread with all of the new gaw miners would be good.

I have no gaw miners justs grid seeds 5 chip and blades.

A nice setup thread with the units would be helpful

the fury
the widow
the falcon
the war machine
the zen controller

I am quoting my self as I am looking for this idea to take off.

1) the fury runs at 1.3mh with 40 watts

https://bitcointalksearch.org/topic/m.7007242 from _____TR________

question to _____TR______ what is your power source a brick or an atx PSU with some pcie adapter cords?

I ask because watts WITH A BRICK would be much higher then with a plat atx psu. So 40 watts is good if it is a brick . Since I think a plat psu with pcie adapters would do 32-35 watts

2) the widow

3) the falcon

4) the war machine

5)zen controller

so please quote and add info to the 5 above.

we can use this to organize a support thread.

alienesb

hero member

Activity: 868

Merit: 1000

I am not right now because it wasn't good to go yesterday. The little guy is pretty stable at Clever which can be finicky at times especially with rejects. I'm not sure it needs such a big fan but I look at it as an eye patch in keeping with it's name Wink

EasyME

newbie

Activity: 49

Merit: 0

Quote from: alienesb on May 29, 2014, 08:49:44 AM

My Fury is hashing away @1.3MHs happily so I turned off my 7990 rig which @.19KWH wasn't really doing anything for me. So happy that I ordered another Fury! Sucks I have to wait a couple of weeks for it but that's OK.

Are you using zenminer ?

alienesb

hero member

Activity: 868

Merit: 1000

My Fury is hashing away @1.3MHs happily so I turned off my 7990 rig which @.19KWH wasn't really doing anything for me. So happy that I ordered another Fury! Sucks I have to wait a couple of weeks for it but that's OK.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: vabchgent on May 29, 2014, 08:28:52 AM

Does anyone know if we need to sign for these when they get delivered.If so Guess Ill be working from home tomorrow.

you can request that they just drop them if yours are with DHL. Just look at your tracking page. or go to dhl.com/mydelivery

SDRebel

hero member

Activity: 571

Merit: 507

Quote from: EvilPanda on May 29, 2014, 07:16:24 AM

Quote from: ?? on ??

Quote from: EvilPanda on May 29, 2014, 06:58:53 AM

Hey reactor, are things ok with your order? Because you're happily posting here, while maintaining your "possible scam" thread. What's up with that?

My order is in Ohio, well technically en route from Ohio to NJ, meaning it should be delivered today. So my software is all built, I've got a zenBox with a disturbingly long network cable creatively running through three rooms in case I have any out-of-the-gate issues and need to plug that in, and if history is any lesson DHL will show up between 1-3, possibly knocking so hard as to wake my daughter up from her nap upstairs, and I'll be adding ~1.35M to my little whirring collection of hardware.

Right now I'm focusing on helping community members - hence the Zen thread in my signature. Not posting in any other threads regarding GAW. I've got pending questions that are being handled in private. Thanks.

That's great, so if you're happy with the services and nobody was actually scammed, I'd appreciate if you could close or delete the "possible scam" thread. Thank you.

it may be better id he instead tells in that thread that his accusations were unfounded and explains that while notwwithout bumps in the road, for the most part everyone is pretty happy

vabchgent

sr. member

Activity: 840

Merit: 251

Does anyone know if we need to sign for these when they get delivered.If so Guess Ill be working from home tomorrow.

vabchgent

sr. member

Activity: 840

Merit: 251

Quote from: ___TR___ on May 29, 2014, 06:53:31 AM

Quote from: JoostB on May 29, 2014, 12:18:24 AM

Quote from: ___TR___ on May 28, 2014, 11:36:34 PM

AVG: 40 watts and puts out the heat.

1.3mh/s

Using cgminer windows build from GAW site. Uptime about 1 1/2hr

Did you measure power taken from the wall outlet or is this pure the power taken by the device?
I can imagine that it will get rather hot with 40W and a hand sized heat-sink with a small fan.
There seem to be quite a lot of hardware errors, is this normal? or did you increase the clock too much?

Power is measured at the wall outlet. Running at recommended clock speed freq. of 328. Listed spec. of 1MH/s+ at 35watts so it is working as specified by GAW.
I am having trouble on some pools with a lot of rejected shares.

Check at your pool make sure difficulty is set at 128 (possibly 256) at pool side and run miners against there own worker. Gridseeds loved anything under 128 so find the right Difficulty and as always mileage may vary.

mbauman89

full member

Activity: 345

Merit: 100

https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T

Mine order departed Cincinnati at 4:42 so idk if it will be delivered today or tomorrow. I'm guessing tomorrow since it doesn't say out for delivery. Patiently waiting Roll Eyes

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: crackfoo on May 29, 2014, 07:02:37 AM

Quote from: ?? on ??

Quote from: crackfoo on May 29, 2014, 06:45:08 AM

anyone in Canada know if you get charged import duties? Mine is now showing:

Awaiting authorization of/or advance duty payment from customer.

This is as far as I got:

http://www.cbsa-asfc.gc.ca/import/postal-postale/duty-droits-eng.html

But the page on GST reads that you owe import tax:

Any item mailed to Canada is potentially subject to duty and taxes. Although the GST was designed as a tax on the consumption of goods and services within Canada, imported goods are also subject to the GST because this ensures fair tax treatment for domestic products. Therefore, unless specifically exempted, you must pay the 5% GST on items you import into Canada by mail.

Wish I could give a more direct answer, the US has no import duties from China/HK on computer hardware so we're safe. Hopefully the above site helps!

Thanks. I sometimes don't get hit with it but sometimes I do. Not sure why sometimes there's nothing, thought maybe it was who ws delivering it as I never had a DHL deliver before. For me they if they get me they hit me with 15% I guess since tax is 15% where I live.

Had to pay $20~ per fury to get them released.

Topic: GAW Community is located at: community.gawminers.com - page 22. (Read 506589 times)