Topic: Genesis Mining Presents: SGMiner-GM - now with Zawawa's GG! [Updated 17/01/2017] - page 7. (Read 140431 times)

i press 7 in bat file nothing happen? is this a joke ??

Your credit card payment may be was declined or did not go through due to technical problem. I paid via credit card and they did hold for 30 days and I started getting paid after that. Till then, it was accumulating in the account.

Sorry..bud..I never had problem with them and I am mining with them like 1 and half years.

What is the complete batch file just in case anyone wants to run it? It will help other very much. Thank you.

7

what are setting for zcash.
270x
rx470
rx570

thank you.

Are you referring to ethash-new? It would be nice to know how much the hashrate is affected. If you kernal is significantly better, that would mean a lot, considering the drop is steep for RX cards over time.

Wolf,

How is easy is this to test. I understand that the benchmark feature was removed in SGMiner?

Heya - this is Carter from BBT ; so what you're telling me is I need to reach back out to Roy and Joerg and ask wtf and point him back to this thread?

Bottom line, when this issue was reported, I reached out to Roy Taylor directly and asked what (AMD) were going to do about this issue, as I can not to this day believe this is an issue with their hardware, however I can believe they may have to address in a driver/firmware. Also I wanted to make sure their leadership was acutely aware of the situation. Roy is an RVP, which normally wouldn't dick with any of this stuff, however what he would dick with is a potential huge loss if they (AMD) really did invest capital building RX470 mining cards.Ultimately it could cause them to have a metric shit ton on the shelf with this issue. That kinda talk normally gets an RVP motivated to poke the engineers, which in this case Joerg responded with what I showed in our episode.

Now I clarified in that episode BBT (us, had not independently verified the words), however, we were taking some serious stock in AMD saying there was a path. That being said, I did mention in the video for the community to fact check the statement which is sounding like you have. We have built an ubuntu image and are going to test the latest SG branch and  replicate the same findings you have. Additionally, I will point AMD leadership back to this thread and ask wtf as this affects everyone if this continues to be a genuine issue.

In closing, we are trying to get an answer to this just like everyone else. We will ensure once we get a response it is shared. 

Just get used to it Nvidia is the future of mining 

Done much troubleshooting yet?  It looks a lot like the performance drop Pitcairn cards have over 1GB, except at 2GB this time.
I wanted to get to the bottom of the Pitcairn issue, but never got around to it.  Although AMD provides some low-level details on the GCN memory architecture, I'm finding I have to reverse engineer some of it due to lack of clear documentation.
https://community.amd.com/thread/216114

Alright thanks for confirming this. Saved me the hassle of having to install SGMINER.

Claymore has confirmed he's working with AMD developers on the epoch benchmark issue.

https://bitcointalksearch.org/topic/m.19798453

So, nobody knows?..

Strange since the guy tested it out and replied

"Yes, it works fine with SGMiner in Linux, Claymore working with AMD directly to address. Bottom line, SGMiner does not experience the issue."

Can anybody confirm here if this SGMINER in Linux suffers the slow-down with a new DAG of the RX series ?

Apparently there is talks that this issue only affects Claymore's software.

See this
https://www.youtube.com/watch?v=l3XOtQtFKSQ&feature=youtu.be&t=978

---------------------------OFFTOPIC Begin--------------------------
Bullshit. Looks like you didn't read the contract carefully, or maybe, can't explain your problem to the support.
I'am invested into GM almost a year ago, and the payments are come regulary. Until the BTC network comissions and difficulty have rised up. Now, the payments are not so frequent, but this is only because of the increased net diff and transaction comissions. The GM is one of the few really not scammed cloud mining services, and they really work.
---------------------------OFFTOPIC End----------------------------

Dear community, I need your help with the miner. Can't launch mining of ETH at all. The miner begins to generate a .bin, connecting to pool, and then the error appears

The launch .cmd main parameters are:
Tried a lot of tweaking: decrease/increase intensity, workunit size, different ETH pools, default core/mem clock settings (removed "gpu-engine" and "gpu-memclock" parameters)but had no luck

The system is:
Windows 7 x64 Ult.
6Gb DDR2 RAM
24576 MB of swap file
2 x Sapphire Pulse RX 560 OC 4Gb (no bios mod)
Catalyst 17.5.2 + APP SDK 2.9.1 installed (tried also v3.0 with no difference)
Each card have the HDMI<->VGA converter inserted to the HDMI port, as the dummy plug. Otherwise  there is no temp and fan monitoring.

The 2nd problem: sgminer can't modify core/mem clocks, so it possible only via Afterburner/TRIXX. The same with the Claymore, so I think it's a system-wide problem Is there any driver patching needed to unlock frequencies control? Sgminer-GM 5.5.5, but also tried the previous versions.

Will be gratefull for help.

Can I get a breakdown for how
rawintensity, worksize, and gpu-threads worktogether?

I can't find any good explanation of how to configure those parameters for an AMD R9 380 using the cryptonight algorithm.

No ID verification like on the Exchanges, so that`s a big plus.

See my Genesis Mining Income overview/review
http://www.dailymotion.com/video/x5rseyt_genesis-mining-june-2017-income-video-review_tech

did you try with ethash-new  or stock ethahs? rember also to adjust intensitive.