do your self a favor and set clocks lower. the gear pulls much higher power per gh at the 1300gh setting then the 1000gh setting
Topic: [Guide] Dogie's Comprehensive Avalon Avalon4 Setup [HD] (Read 9496 times)
Ahh! Never mind, I had forgotton to trick the power supply into thinking it was connected to a motherboard, I love modular power supplies but they got me this time around, I hadn't even connected the 24 pin! All working now and doing great! 
Hi Guys,
Still having trouble here
Now when I hook up my Avalon4's they do not even light up or make a sound, all three of them. The usb connector is showing the red light in the middle again. Seeing as last time it just seemd to fix itself, I have no idea what else to try! I have flashed the latest firmware onto the TP-Link, restarted the cgminer, checked everything I could think of, changed cables etc...
Now I am using a HXi Corsair 1000W power supply.
cgminer status shows the unit alive:
https://lh3.googleusercontent.com/-JAXjOdQYak4/VUClZeHiyxI/AAAAAAAARpM/NDOsrlefJsY/w1598-h422-no/minerstatus.PNG
cgminer API log seems normal?
Processes :
https://lh4.googleusercontent.com/-6BjwnEPVnCc/VUClZQtqAJI/AAAAAAAARpM/u-NPmbxUYKw/w1598-h663-no/Procceses.PNG
and perhaps most interesting to anyone who knows all the tech details, the system log:
Again if anyone can help me get these things running again I would be soo grateful!
Still having trouble here
Now when I hook up my Avalon4's they do not even light up or make a sound, all three of them. The usb connector is showing the red light in the middle again. Seeing as last time it just seemd to fix itself, I have no idea what else to try! I have flashed the latest firmware onto the TP-Link, restarted the cgminer, checked everything I could think of, changed cables etc...Now I am using a HXi Corsair 1000W power supply.
cgminer status shows the unit alive:
https://lh3.googleusercontent.com/-JAXjOdQYak4/VUClZeHiyxI/AAAAAAAARpM/NDOsrlefJsY/w1598-h422-no/minerstatus.PNG
cgminer API log seems normal?
Code:
[Firmware Version] => Canaan A4-20150331
luci: b012d57
cgminer: 1161901
cgminer-openwrt-packages: 2641dc9
Reply was 'STATUS=S,When=1430299417,Code=70,Msg=CGMiner stats,Description=cgminer 4.9.0|STATS=0,ID=AV40,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM Count=0,Automatic Voltage=true,AUC VER=AUC-20141122,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC ADC=17419,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=16.00000000,Max Diff=16.00000000,Min Diff Count=202,Max Diff Count=202,Times Sent=2,Bytes Sent=146,Times Recv=15,Bytes Recv=14868,Net Bytes Sent=146,Net Bytes Recv=14868|STATS=2,ID=POOL1,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32.00000000,Min Diff=32.00000000,Max Diff=32.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=145,Times Recv=6,Bytes Recv=2589,Net Bytes Sent=145,Net Bytes Recv=2589|STATS=3,ID=POOL2,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=3,Bytes Sent=219,Times Recv=5,Bytes Recv=7963,Net Bytes Sent=219,Net Bytes Recv=7963|'
[STATUS] =>
(
[STATUS] => S
[When] => 1430299417
[Code ] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.9.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AV40
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[MM Count] => 0
[Automatic Voltage] => true
[AUC VER] => AUC-20141122
[AUC I2C Speed] => 400000
[AUC I2C XDelay] => 19200
[AUC ADC] => 17419
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 16.00000000
[Min Diff] => 16.00000000
[Max Diff] => 16.00000000
[Min Diff Count] => 202
[Max Diff Count] => 202
[Times Sent] => 2
[Bytes Sent] => 146
[Times Recv] => 15
[Bytes Recv] => 14868
[Net Bytes Sent] => 146
[Net Bytes Recv] => 14868
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL1
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32.00000000
[Min Diff] => 32.00000000
[Max Diff] => 32.00000000
[Min Diff Count] => 1
[Max Diff Count] => 1
[Times Sent] => 2
[Bytes Sent] => 145
[Times Recv] => 6
[Bytes Recv] => 2589
[Net Bytes Sent] => 145
[Net Bytes Recv] => 2589
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL2
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 0.00000000
[Min Diff] => 0.00000000
[Max Diff] => 0.00000000
[Min Diff Count] => 0
[Max Diff Count] => 0
[Times Sent] => 3
[Bytes Sent] => 219
[Times Recv] => 5
[Bytes Recv] => 7963
[Net Bytes Sent] => 219
[Net Bytes Recv] => 7963
)
luci: b012d57
cgminer: 1161901
cgminer-openwrt-packages: 2641dc9
Reply was 'STATUS=S,When=1430299417,Code=70,Msg=CGMiner stats,Description=cgminer 4.9.0|STATS=0,ID=AV40,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM Count=0,Automatic Voltage=true,AUC VER=AUC-20141122,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC ADC=17419,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=16.00000000,Max Diff=16.00000000,Min Diff Count=202,Max Diff Count=202,Times Sent=2,Bytes Sent=146,Times Recv=15,Bytes Recv=14868,Net Bytes Sent=146,Net Bytes Recv=14868|STATS=2,ID=POOL1,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32.00000000,Min Diff=32.00000000,Max Diff=32.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=145,Times Recv=6,Bytes Recv=2589,Net Bytes Sent=145,Net Bytes Recv=2589|STATS=3,ID=POOL2,Elapsed=354,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=3,Bytes Sent=219,Times Recv=5,Bytes Recv=7963,Net Bytes Sent=219,Net Bytes Recv=7963|'
[STATUS] =>
(
[STATUS] => S
[When] => 1430299417
[Code ] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.9.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AV40
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[MM Count] => 0
[Automatic Voltage] => true
[AUC VER] => AUC-20141122
[AUC I2C Speed] => 400000
[AUC I2C XDelay] => 19200
[AUC ADC] => 17419
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 16.00000000
[Min Diff] => 16.00000000
[Max Diff] => 16.00000000
[Min Diff Count] => 202
[Max Diff Count] => 202
[Times Sent] => 2
[Bytes Sent] => 146
[Times Recv] => 15
[Bytes Recv] => 14868
[Net Bytes Sent] => 146
[Net Bytes Recv] => 14868
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL1
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32.00000000
[Min Diff] => 32.00000000
[Max Diff] => 32.00000000
[Min Diff Count] => 1
[Max Diff Count] => 1
[Times Sent] => 2
[Bytes Sent] => 145
[Times Recv] => 6
[Bytes Recv] => 2589
[Net Bytes Sent] => 145
[Net Bytes Recv] => 2589
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL2
[Elapsed] => 354
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 0.00000000
[Min Diff] => 0.00000000
[Max Diff] => 0.00000000
[Min Diff Count] => 0
[Max Diff Count] => 0
[Times Sent] => 3
[Bytes Sent] => 219
[Times Recv] => 5
[Bytes Recv] => 7963
[Net Bytes Sent] => 219
[Net Bytes Recv] => 7963
)
Processes :
https://lh4.googleusercontent.com/-6BjwnEPVnCc/VUClZQtqAJI/AAAAAAAARpM/u-NPmbxUYKw/w1598-h663-no/Procceses.PNG
and perhaps most interesting to anyone who knows all the tech details, the system log:
Code:
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.690000] usbcore: registered new interface driver usbfs
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.700000] usbcore: registered new interface driver hub
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.700000] usbcore: registered new device driver usb
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.720000] ehci-platform: EHCI generic platform driver
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.720000] ehci-platform ehci-platform: EHCI Host Controller
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.730000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.740000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.760000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.760000] hub 1-0:1.0: USB hub found
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.760000] hub 1-0:1.0: 1 port detected
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 4.100000] usb 1-1: new full-speed USB device number 2 using ehci-platform
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 7.240000] eth0: link up (100Mbps/Full duplex)
Wed Apr 29 09:09:11 2015 kern.warn kernel: [ 7.890000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
Wed Apr 29 09:09:11 2015 kern.warn kernel: [ 7.890000] jffs2_build_filesystem(): unlocking the mtd device... done.
Wed Apr 29 09:09:11 2015 kern.warn kernel: [ 7.900000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
Wed Apr 29 09:09:11 2015 kern.notice kernel: [ 9.690000] jffs2: notice: (309) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 10.320000] eth0: link down
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.340000] Loading modules backported from Linux version master-2014-10-08-0-g0275925
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.350000] Backport generated by backports.git backports-20140905-1-gde42785
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.360000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.410000] xt_time: kernel timezone is -0000
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.440000] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.460000] cfg80211: Calling CRDA to update world regulatory domain
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.460000] cfg80211: World regulatory domain updated:
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.470000] cfg80211: DFS Master region: unset
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.470000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.480000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.490000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.500000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.500000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.510000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.520000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.530000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.540000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: EEPROM regdomain: 0x0
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: EEPROM indicates default country code should be used
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: doing EEPROM country->regdmn map search
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: country maps to regdmn code: 0x3a
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: Country alpha2 being used: US
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: Regpair used: 0x3a
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.670000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.680000] cfg80211: Calling CRDA for country: US
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.690000] cfg80211: Regulatory domain changed to country: US
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.690000] cfg80211: DFS Master region: FCC
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.690000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.700000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.710000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.720000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.730000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.740000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.740000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Wed Apr 29 09:09:13 2015 user.emerg syslog: 'radio0' is disabled
Wed Apr 29 09:09:13 2015 user.emerg syslog: 'radio0' is disabled
Wed Apr 29 09:09:14 2015 daemon.err odhcpd[811]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:14 2015 daemon.err odhcpd[811]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:15 2015 authpriv.info dropbear[844]: Not backgrounding
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: bad address '2.asia.pool.ntp.org'
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: could not resolve peer 2.asia.pool.ntp.org, skipping
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: bad address '3.asia.pool.ntp.org'
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: could not resolve peer 3.asia.pool.ntp.org, skipping
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: bad address '1.cn.pool.ntp.org'
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: could not resolve peer 1.cn.pool.ntp.org, skipping
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'lan' is enabled
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.310000] device eth0 entered promiscuous mode
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' is enabled
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' is now up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Network device 'lo' link is up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.750000] eth0: link up (100Mbps/Full duplex)
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.750000] br-lan: port 1(eth0) entered forwarding state
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.760000] br-lan: port 1(eth0) entered forwarding state
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Network device 'eth0' link is up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'lan' is setting up now
Wed Apr 29 09:09:18 2015 daemon.notice netifd: lan (957): udhcpc (v1.22.1) started
Wed Apr 29 09:09:19 2015 daemon.notice netifd: lan (957): Sending discover...
Wed Apr 29 09:09:19 2015 daemon.notice netifd: lan (957): Sending select for 192.168.0.6...
Wed Apr 29 09:09:19 2015 daemon.notice netifd: lan (957): Lease of 192.168.0.6 obtained, lease time 86400
Wed Apr 29 09:09:19 2015 daemon.notice netifd: Interface 'lan' is now up
Wed Apr 29 09:09:19 2015 daemon.err odhcpd[988]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:19 2015 daemon.err odhcpd[988]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: started, version 2.72 cachesize 150
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: using local addresses only for domain lan
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: reading /tmp/resolv.conf.auto
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: using local addresses only for domain lan
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: using nameserver 192.168.0.1#53
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: read /etc/hosts - 1 addresses
Wed Apr 29 09:09:20 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Apr 29 09:09:20 2015 kern.info kernel: [ 27.760000] br-lan: port 1(eth0) entered forwarding state
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[986]: exiting on receipt of SIGTERM
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: started, version 2.72 cachesize 150
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: using local addresses only for domain lan
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: reading /tmp/resolv.conf.auto
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: using local addresses only for domain lan
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: using nameserver 192.168.0.1#53
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: read /etc/hosts - 1 addresses
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: read /tmp/hosts/dhcp - 1 addresses
Wed Apr 29 09:09:24 2015 user.emerg syslog: ntpd: resolved peer 2.asia.pool.ntp.org to 129.250.35.251
Wed Apr 29 09:09:24 2015 user.emerg syslog: ntpd: sending query to 129.250.35.251
Wed Apr 29 09:09:24 2015 daemon.err odhcpd[1054]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:24 2015 daemon.err odhcpd[1054]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:28 2015 user.emerg syslog: ntpd: resolved peer 3.asia.pool.ntp.org to 129.250.35.250
Wed Apr 29 09:09:28 2015 user.emerg syslog: ntpd: sending query to 129.250.35.250
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 1.cn.pool.ntp.org to 202.118.1.81
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 202.118.1.81
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 129.250.35.251: offset:+271.769855 delay:4.549858 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.014206 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 129.250.35.250: offset:+273.493714 delay:0.645353 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.002411 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: Alarm clock
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 2.asia.pool.ntp.org to 31.193.144.2
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 3.asia.pool.ntp.org to 124.41.86.200
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 1.cn.pool.ntp.org to 202.118.1.130
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.705036 delay:0.270072 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.006256 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.789863 delay:0.283320 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.733575 delay:0.452134 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x01
Wed Apr 29 09:09:29 2015 daemon.err odhcpd[1060]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:29 2015 daemon.err odhcpd[1060]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.717846 delay:0.238736 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.006256 reach:0x03
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.790906 delay:0.283720 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x03
Wed Apr 29 09:09:31 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.742558 delay:0.431989 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x03
Wed Apr 29 09:09:32 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:32 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.841966 delay:0.661551 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x07
Wed Apr 29 09:09:33 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:33 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:33 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:34 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.813386 delay:0.419917 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.006256 reach:0x07
Wed Apr 29 09:09:34 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.892390 delay:0.486324 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x07
Wed Apr 29 09:09:34 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.829441 delay:0.664424 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x0f
Wed Apr 29 09:09:34 2015 daemon.err odhcpd[1065]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:34 2015 daemon.err odhcpd[1065]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:35 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:35 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:35 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.868890 delay:0.482915 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x0f
Wed Apr 29 09:09:36 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.828282 delay:0.618038 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x1f
Wed Apr 29 09:09:37 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:37 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.833733 delay:0.473279 status:0x24 strat:2 refid:0x0a545792 rootdelay:0.006104 reach:0x0f
Wed Apr 29 09:09:38 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:38 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:38 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:14:12 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.853762 delay:0.501910 status:0x24 strat:2 refid:0x0a545792 rootdelay:0.006104 reach:0x1f
Wed Apr 29 09:14:12 2015 user.emerg syslog: ntpd: setting time to 2015-04-29 09:14:12.938769 (offset +273.868890s)
Wed Apr 29 09:14:13 2015 daemon.err udevd[1074]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
Wed Apr 29 09:14:13 2015 daemon.info kernel: [ 46.490000] udevd[1075]: starting version 173
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'tty' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'dialout' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'kmem' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'video' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'lp' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'disk' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'floppy' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'cdrom' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'tape' unknown
Wed Apr 29 09:14:13 2015 daemon.err odhcpd[1077]: Failed to open routing table: No such file or directory
Wed Apr 29 09:14:13 2015 daemon.err odhcpd[1077]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:14:13 2015 user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
Wed Apr 29 09:14:15 2015 user.emerg syslog: - init complete -
Wed Apr 29 09:14:35 2015 cron.info crond[632]: crond: USER root pid 1102 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:15:01 2015 cron.info crond[632]: crond: USER root pid 1111 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:20:01 2015 cron.info crond[632]: crond: USER root pid 1363 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:25:01 2015 cron.info crond[632]: crond: USER root pid 1376 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:30:01 2015 cron.info crond[632]: crond: USER root pid 1418 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.700000] usbcore: registered new interface driver hub
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.700000] usbcore: registered new device driver usb
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.720000] ehci-platform: EHCI generic platform driver
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.720000] ehci-platform ehci-platform: EHCI Host Controller
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.730000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.740000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.760000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.760000] hub 1-0:1.0: USB hub found
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 3.760000] hub 1-0:1.0: 1 port detected
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 4.100000] usb 1-1: new full-speed USB device number 2 using ehci-platform
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 7.240000] eth0: link up (100Mbps/Full duplex)
Wed Apr 29 09:09:11 2015 kern.warn kernel: [ 7.890000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
Wed Apr 29 09:09:11 2015 kern.warn kernel: [ 7.890000] jffs2_build_filesystem(): unlocking the mtd device... done.
Wed Apr 29 09:09:11 2015 kern.warn kernel: [ 7.900000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
Wed Apr 29 09:09:11 2015 kern.notice kernel: [ 9.690000] jffs2: notice: (309) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 10.320000] eth0: link down
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.340000] Loading modules backported from Linux version master-2014-10-08-0-g0275925
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.350000] Backport generated by backports.git backports-20140905-1-gde42785
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.360000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.410000] xt_time: kernel timezone is -0000
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.440000] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.460000] cfg80211: Calling CRDA to update world regulatory domain
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.460000] cfg80211: World regulatory domain updated:
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.470000] cfg80211: DFS Master region: unset
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.470000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.480000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.490000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.500000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.500000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.510000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.520000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.530000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.540000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: EEPROM regdomain: 0x0
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: EEPROM indicates default country code should be used
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: doing EEPROM country->regdmn map search
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: country maps to regdmn code: 0x3a
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: Country alpha2 being used: US
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.660000] ath: Regpair used: 0x3a
Wed Apr 29 09:09:11 2015 kern.debug kernel: [ 14.670000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.680000] cfg80211: Calling CRDA for country: US
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.690000] cfg80211: Regulatory domain changed to country: US
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.690000] cfg80211: DFS Master region: FCC
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.690000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.700000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.710000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.720000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.730000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.740000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Wed Apr 29 09:09:11 2015 kern.info kernel: [ 14.740000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Wed Apr 29 09:09:13 2015 user.emerg syslog: 'radio0' is disabled
Wed Apr 29 09:09:13 2015 user.emerg syslog: 'radio0' is disabled
Wed Apr 29 09:09:14 2015 daemon.err odhcpd[811]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:14 2015 daemon.err odhcpd[811]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:15 2015 authpriv.info dropbear[844]: Not backgrounding
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: bad address '2.asia.pool.ntp.org'
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: could not resolve peer 2.asia.pool.ntp.org, skipping
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: bad address '3.asia.pool.ntp.org'
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: could not resolve peer 3.asia.pool.ntp.org, skipping
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: bad address '1.cn.pool.ntp.org'
Wed Apr 29 09:09:17 2015 user.emerg syslog: ntpd: could not resolve peer 1.cn.pool.ntp.org, skipping
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'lan' is enabled
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.310000] device eth0 entered promiscuous mode
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' is enabled
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' is now up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Network device 'lo' link is up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.750000] eth0: link up (100Mbps/Full duplex)
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.750000] br-lan: port 1(eth0) entered forwarding state
Wed Apr 29 09:09:18 2015 kern.info kernel: [ 25.760000] br-lan: port 1(eth0) entered forwarding state
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Network device 'eth0' link is up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Apr 29 09:09:18 2015 daemon.notice netifd: Interface 'lan' is setting up now
Wed Apr 29 09:09:18 2015 daemon.notice netifd: lan (957): udhcpc (v1.22.1) started
Wed Apr 29 09:09:19 2015 daemon.notice netifd: lan (957): Sending discover...
Wed Apr 29 09:09:19 2015 daemon.notice netifd: lan (957): Sending select for 192.168.0.6...
Wed Apr 29 09:09:19 2015 daemon.notice netifd: lan (957): Lease of 192.168.0.6 obtained, lease time 86400
Wed Apr 29 09:09:19 2015 daemon.notice netifd: Interface 'lan' is now up
Wed Apr 29 09:09:19 2015 daemon.err odhcpd[988]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:19 2015 daemon.err odhcpd[988]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: started, version 2.72 cachesize 150
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: using local addresses only for domain lan
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: reading /tmp/resolv.conf.auto
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: using local addresses only for domain lan
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: using nameserver 192.168.0.1#53
Wed Apr 29 09:09:19 2015 daemon.info dnsmasq[986]: read /etc/hosts - 1 addresses
Wed Apr 29 09:09:20 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Apr 29 09:09:20 2015 kern.info kernel: [ 27.760000] br-lan: port 1(eth0) entered forwarding state
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[986]: exiting on receipt of SIGTERM
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: started, version 2.72 cachesize 150
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: using local addresses only for domain lan
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: reading /tmp/resolv.conf.auto
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: using local addresses only for domain lan
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: using nameserver 192.168.0.1#53
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: read /etc/hosts - 1 addresses
Wed Apr 29 09:09:21 2015 daemon.info dnsmasq[1047]: read /tmp/hosts/dhcp - 1 addresses
Wed Apr 29 09:09:24 2015 user.emerg syslog: ntpd: resolved peer 2.asia.pool.ntp.org to 129.250.35.251
Wed Apr 29 09:09:24 2015 user.emerg syslog: ntpd: sending query to 129.250.35.251
Wed Apr 29 09:09:24 2015 daemon.err odhcpd[1054]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:24 2015 daemon.err odhcpd[1054]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:28 2015 user.emerg syslog: ntpd: resolved peer 3.asia.pool.ntp.org to 129.250.35.250
Wed Apr 29 09:09:28 2015 user.emerg syslog: ntpd: sending query to 129.250.35.250
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 1.cn.pool.ntp.org to 202.118.1.81
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 202.118.1.81
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 129.250.35.251: offset:+271.769855 delay:4.549858 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.014206 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 129.250.35.250: offset:+273.493714 delay:0.645353 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.002411 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: Alarm clock
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 2.asia.pool.ntp.org to 31.193.144.2
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 3.asia.pool.ntp.org to 124.41.86.200
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: resolved peer 1.cn.pool.ntp.org to 202.118.1.130
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.705036 delay:0.270072 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.006256 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.789863 delay:0.283320 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x01
Wed Apr 29 09:09:29 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.733575 delay:0.452134 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x01
Wed Apr 29 09:09:29 2015 daemon.err odhcpd[1060]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:29 2015 daemon.err odhcpd[1060]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.717846 delay:0.238736 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.006256 reach:0x03
Wed Apr 29 09:09:30 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.790906 delay:0.283720 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x03
Wed Apr 29 09:09:31 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.742558 delay:0.431989 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x03
Wed Apr 29 09:09:32 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:32 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.841966 delay:0.661551 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x07
Wed Apr 29 09:09:33 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:33 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:33 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:34 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.813386 delay:0.419917 status:0x24 strat:2 refid:0x67016a45 rootdelay:0.006256 reach:0x07
Wed Apr 29 09:09:34 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.892390 delay:0.486324 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x07
Wed Apr 29 09:09:34 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.829441 delay:0.664424 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x0f
Wed Apr 29 09:09:34 2015 daemon.err odhcpd[1065]: Failed to open routing table: No such file or directory
Wed Apr 29 09:09:34 2015 daemon.err odhcpd[1065]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:09:35 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:35 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:09:35 2015 user.emerg syslog: ntpd: reply from 202.118.1.130: offset:+273.868890 delay:0.482915 status:0x24 strat:2 refid:0xca76012e rootdelay:0.000244 reach:0x0f
Wed Apr 29 09:09:36 2015 user.emerg syslog: ntpd: reply from 31.193.144.2: offset:+273.828282 delay:0.618038 status:0x24 strat:2 refid:0x81060f1c rootdelay:0.221485 reach:0x1f
Wed Apr 29 09:09:37 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:37 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.833733 delay:0.473279 status:0x24 strat:2 refid:0x0a545792 rootdelay:0.006104 reach:0x0f
Wed Apr 29 09:09:38 2015 user.emerg syslog: ntpd: sending query to 31.193.144.2
Wed Apr 29 09:09:38 2015 user.emerg syslog: ntpd: sending query to 124.41.86.200
Wed Apr 29 09:09:38 2015 user.emerg syslog: ntpd: sending query to 202.118.1.130
Wed Apr 29 09:14:12 2015 user.emerg syslog: ntpd: reply from 124.41.86.200: offset:+273.853762 delay:0.501910 status:0x24 strat:2 refid:0x0a545792 rootdelay:0.006104 reach:0x1f
Wed Apr 29 09:14:12 2015 user.emerg syslog: ntpd: setting time to 2015-04-29 09:14:12.938769 (offset +273.868890s)
Wed Apr 29 09:14:13 2015 daemon.err udevd[1074]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
Wed Apr 29 09:14:13 2015 daemon.info kernel: [ 46.490000] udevd[1075]: starting version 173
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'tty' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'dialout' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'kmem' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'video' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'lp' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'disk' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'floppy' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'cdrom' unknown
Wed Apr 29 09:14:13 2015 daemon.err udevd[1075]: specified group 'tape' unknown
Wed Apr 29 09:14:13 2015 daemon.err odhcpd[1077]: Failed to open routing table: No such file or directory
Wed Apr 29 09:14:13 2015 daemon.err odhcpd[1077]: Unable to open raw socket: Address family not supported by protocol
Wed Apr 29 09:14:13 2015 user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
Wed Apr 29 09:14:15 2015 user.emerg syslog: - init complete -
Wed Apr 29 09:14:35 2015 cron.info crond[632]: crond: USER root pid 1102 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:15:01 2015 cron.info crond[632]: crond: USER root pid 1111 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:20:01 2015 cron.info crond[632]: crond: USER root pid 1363 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:25:01 2015 cron.info crond[632]: crond: USER root pid 1376 cmd /usr/bin/cgminer-monitor
Wed Apr 29 09:30:01 2015 cron.info crond[632]: crond: USER root pid 1418 cmd /usr/bin/cgminer-monitor
Again if anyone can help me get these things running again I would be soo grateful!
Looks like problem solved for the Avalon3 as well! IT seems I inadvertently upgraded both firmwares on the TP-Link to the Avalon 4 version. Reverting back to the Avalon3 firmware (confusingly named exactly the same as the file for the 4s: openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory).
Still didn't work, however I noticed the connector shipped with the 3s is slightly different than the few I got in the new package of 4s, namely it is a bit shorter and fewer lights:
Switching back to the old one and hey presto the old jet engine Avalon3 frighteningly whirred back into action! Damn the 4s are incredibly quiet compared I definitely understand what philipma1957 talks about in his review, if you value silence the 4s are awesome; like ninja mining
I'll post back a triumphant pic of my full set up later if anyone is interested, I also have 5 Avalon Nanos to get into gear too, should be fun. If I have any trouble I certainty know where to come, thanks everyone!
Still didn't work, however I noticed the connector shipped with the 3s is slightly different than the few I got in the new package of 4s, namely it is a bit shorter and fewer lights:
Switching back to the old one and hey presto the old jet engine Avalon3 frighteningly whirred back into action! Damn the 4s are incredibly quiet compared I definitely understand what philipma1957 talks about in his review, if you value silence the 4s are awesome; like ninja mining
I'll post back a triumphant pic of my full set up later if anyone is interested, I also have 5 Avalon Nanos to get into gear too, should be fun. If I have any trouble I certainty know where to come, thanks everyone!
yeah the quiet of them is truly great. right now it is spring in NJ but it has been a bit cold. So my tv den would be cold , but I am running the 2 avalon 4.1's I have pulling 1000 watts at 1850gh.
My wife and I can watch the tv with 0 issues. These are truly the most superior space heating miners ever built. Underclock to the 800-950gh range and they are really quiet. Plus they do well at watt per gh.
If only they were 400 usd shipped not 550 for 1.
I would have purchased 6. Not 2 + the free demo I reviewed.
Looks like problem solved for the Avalon3 as well! IT seems I inadvertently upgraded both firmwares on the TP-Link to the Avalon 4 version. Reverting back to the Avalon3 firmware (confusingly named exactly the same as the file for the 4s: openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory).
Still didn't work, however I noticed the connector shipped with the 3s is slightly different than the few I got in the new package of 4s, namely it is a bit shorter and fewer lights:
https://lh4.googleusercontent.com/-y4vaSp_y93o/VTsi7jAgLcI/AAAAAAAARYo/CyNg4xraHR8/w509-h905-no/20150425_151101.jpg
Switching back to the old one and hey presto the old jet engine Avalon3 frighteningly whirred back into action! Damn the 4s are incredibly quiet compared I definitely understand what philipma1957 talks about in his review, if you value silence the 4s are awesome; like ninja mining https://lh4.googleusercontent.com/-D96gf9TEtLY/VTslvTKF1jI/AAAAAAAARY8/hI7ZGofidzA/w348-h227-no/Last-Ninja-3-Amiga-22.jpg
I'll post back a triumphant pic of my full set up later if anyone is interested, I also have 5 Avalon Nanos to get into gear too, should be fun. If I have any trouble I certainty know where to come, thanks everyone!
Still didn't work, however I noticed the connector shipped with the 3s is slightly different than the few I got in the new package of 4s, namely it is a bit shorter and fewer lights:
https://lh4.googleusercontent.com/-y4vaSp_y93o/VTsi7jAgLcI/AAAAAAAARYo/CyNg4xraHR8/w509-h905-no/20150425_151101.jpg
Switching back to the old one and hey presto the old jet engine Avalon3 frighteningly whirred back into action! Damn the 4s are incredibly quiet compared I definitely understand what philipma1957 talks about in his review, if you value silence the 4s are awesome; like ninja mining https://lh4.googleusercontent.com/-D96gf9TEtLY/VTslvTKF1jI/AAAAAAAARY8/hI7ZGofidzA/w348-h227-no/Last-Ninja-3-Amiga-22.jpg
I'll post back a triumphant pic of my full set up later if anyone is interested, I also have 5 Avalon Nanos to get into gear too, should be fun. If I have any trouble I certainty know where to come, thanks everyone!
Hmm just powered the TPLink connected to the still not working Avalon3 directly from a power board, still no go.
Something I forgot to mention earlier is the lighting situation on the connector between the Avalons and the TP-Link; My Avalon4 started working the second the red light in the middle went out, leaving only the blue and green. I cannot for the life of me remember doing anything to fix it, I had flashed the new firmware once or twice and run through the set up again but to no avail, infact I was halfway through preparing to restore my PC to an earlier time when I knew the Avalon3's were working when I noticed the red light had gone out, fired it up and away it went!
You can still see the red light on the Avalon3 below:
https://lh6.googleusercontent.com/LRCz31Ln9ASfxzQGx6Mi15Ugxxto8acutlE16b6gdY60=w1531-h861-no
Anyone know what that red light signifies, I would really like it to go off!
Something I forgot to mention earlier is the lighting situation on the connector between the Avalons and the TP-Link; My Avalon4 started working the second the red light in the middle went out, leaving only the blue and green. I cannot for the life of me remember doing anything to fix it, I had flashed the new firmware once or twice and run through the set up again but to no avail, infact I was halfway through preparing to restore my PC to an earlier time when I knew the Avalon3's were working when I noticed the red light had gone out, fired it up and away it went!
You can still see the red light on the Avalon3 below:
https://lh6.googleusercontent.com/LRCz31Ln9ASfxzQGx6Mi15Ugxxto8acutlE16b6gdY60=w1531-h861-no
Anyone know what that red light signifies, I would really like it to go off!
1) What PSU are they using?
2) To me it looks like the second and last 2 LEDs are on, not the first one. Its hard to see. The second one is a "I'm not mining" LED.
3) How are you connecting to the WRT? Ie:
WRT -> Powered USB hub -> -> USB adapter -> chained units.
If you don't have a powered USB hub in there it will probably fail.
2) To me it looks like the second and last 2 LEDs are on, not the first one. Its hard to see. The second one is a "I'm not mining" LED.
3) How are you connecting to the WRT? Ie:
WRT -> Powered USB hub -> -> USB adapter -> chained units.
If you don't have a powered USB hub in there it will probably fail.
It could be since I'm using a Raspberry Pi. But I was able to use a cheap hub not powered. I have 3 Avalon 4.1's hooked up to it then to the Raspberry Pi.
if you want I can send you a working rasp pi with a working sdcard with a working power brick to help you troubleshoot. but I am usa so are you usa?
I also did rasp pi early model b
http://www.amazon.com/Raspberry-Pi-756-8308-Motherboard-RASPBRRYPCBA512/dp/B009SQQF9C/ref=sr_1_3?ie=UTF8&qid=1429905462&sr=8-3&keywords=raspberry+pi+b
with a full sized sdcard pretty much flawless for me.
I also did rasp pi early model b
http://www.amazon.com/Raspberry-Pi-756-8308-Motherboard-RASPBRRYPCBA512/dp/B009SQQF9C/ref=sr_1_3?ie=UTF8&qid=1429905462&sr=8-3&keywords=raspberry+pi+b
with a full sized sdcard pretty much flawless for me.
Thanks so much for the offer! I was thinking about getting the rasp pi going, but I am in Australia so shipping it might take sometime; I think I'll try a few things first, like the powered usb that dogie suggests:
1) What PSU are they using?
2) To me it looks like the second and last 2 LEDs are on, not the first one. Its hard to see. The second one is a "I'm not mining" LED.
3) How are you connecting to the WRT? Ie:
WRT -> Powered USB hub -> -> USB adapter -> chained units.
If you don't have a powered USB hub in there it will probably fail.
2) To me it looks like the second and last 2 LEDs are on, not the first one. Its hard to see. The second one is a "I'm not mining" LED.
3) How are you connecting to the WRT? Ie:
WRT -> Powered USB hub -> -> USB adapter -> chained units.
If you don't have a powered USB hub in there it will probably fail.
I am thinking it might be the fact I am not using a powered usb hub as, all of a sudden, now the unit is actually mining! Yay!!
:https://lh5.googleusercontent.com/-sHdCK1KsQsQ/VTrFuIqTbTI/AAAAAAAARWY/WyROfksWLB8/w1598-h363-no/MiningYay.PNG
I can even squeeze over 1.3THs out of it, although I have no idea of the power it chews when doing so, probably way to much but meh, I like seeing it go that hard!
https://lh4.googleusercontent.com/-y928DLGpJ6w/VTrFuRLDkDI/AAAAAAAARWc/rfIQ8Q-mefY/w1009-h266-no/FullOn.PNG
https://lh3.googleusercontent.com/-W2_Fkn15aJQ/VTrLnqseq8I/AAAAAAAARX8/5WnybucOqsI/w1005-h674-no/Bitminter.PNG
But your questions are still relevant because my Older Avalon3 I have hooked up to testing my bedroom (before garaging them) is still suffering from the same issue. I am hoping a powered usb might fix it as it and the Avalon4 are both linked to WR703Ns that have usb power from my desktop PC:
https://lh5.googleusercontent.com/-hqMX-XyVVm8/VTrLyNqnHYI/AAAAAAAARYE/RK8RJcK6IQQ/w1531-h861-no/20150425_084352.jpg
https://lh5.googleusercontent.com/-ukv6y_k2mK4/VTrLyIlGYpI/AAAAAAAARYE/gKhjfqRVgs4/w1531-h861-no/20150425_084403.jpg
But to your questions Dogie:
- The Avalon4 is using an Atec HCG-900 and the Avalon3 is using a Corsair CS450M
- I think you are right, the second orange "WARN" light was on and the last two green"PG1/PG2" and "N1/N2" lights where on solid
- At the moment only one of each, but when I put it out in the garage and chain the 3s together with on TP-Link and the 4s together with the other and they will all will be powered via a powerboard
Thanks for all the advice guys! I'll get back to you and let everyone know how I went with the powered usb solution and chaining the three 4s together!
If all the 4s chain together nicely I'm guessing the most appropriate thing is to take the reaming issues (although the same) over to an Avalon3 thread?
1) What PSU are they using?
2) To me it looks like the second and last 2 LEDs are on, not the first one. Its hard to see. The second one is a "I'm not mining" LED.
3) How are you connecting to the WRT? Ie:
WRT -> Powered USB hub -> -> USB adapter -> chained units.
If you don't have a powered USB hub in there it will probably fail.
2) To me it looks like the second and last 2 LEDs are on, not the first one. Its hard to see. The second one is a "I'm not mining" LED.
3) How are you connecting to the WRT? Ie:
WRT -> Powered USB hub -> -> USB adapter -> chained units.
If you don't have a powered USB hub in there it will probably fail.
if you want I can send you a working rasp pi with a working sdcard with a working power brick to help you troubleshoot. but I am usa so are you usa?
I also did rasp pi early model b
http://www.amazon.com/Raspberry-Pi-756-8308-Motherboard-RASPBRRYPCBA512/dp/B009SQQF9C/ref=sr_1_3?ie=UTF8&qid=1429905462&sr=8-3&keywords=raspberry+pi+b
with a full sized sdcard pretty much flawless for me.
I also did rasp pi early model b
http://www.amazon.com/Raspberry-Pi-756-8308-Motherboard-RASPBRRYPCBA512/dp/B009SQQF9C/ref=sr_1_3?ie=UTF8&qid=1429905462&sr=8-3&keywords=raspberry+pi+b
with a full sized sdcard pretty much flawless for me.
Thanks for the advice notlist3d, and congratulations on your little rig, seems to be going great form the posts, it gives me hope I can sort this out!
Not a problem! They will get it working. I know I did a lot of checks of basic stuff, then they did a team viewer session. I specifically have to give Fengling some serious credit for all help he did on my first unit.
If you are not able to get it to work and happen to get a Raspberry Pi unit let me know and I would happily upload my image that is working with 3 units.
Thanks for the advice notlist3d, and congratulations on your little rig, seems to be going great form the posts, it gives me hope I can sort this out!
Yep tested all three and the give the same result , surely that makes it very unlikely they are all dead hardware wise!
, surely that makes it very unlikely they are all dead hardware wise!I can't imagine all 3 getting loose in shipping. The Canaan Creative help can be found here: https://ehash.com/support/ They do have very good support from my dealings with them when I first set up and had a issue.
The good news is it's morning in China, I would send them a email showing problem. I know when I had a issue like this they had me open it up and check connection, but I cannot imagine 3 having connection issues. I would ask them to log in teamviewer session to look. I also don't want to be the one to tell you to open up and check connection that should be them.
If you have a raspberry pi unit I could be of more help.
Yep tested all three and the give the same result , surely that makes it very unlikely they are all dead hardware wise!
, surely that makes it very unlikely they are all dead hardware wise!
I have just received my 4.2TH suite from Avalon but am having issues with the setup. After following all your steps and setting up the WR703N, hooking everything up I get the ERR lights below on the machine:
https://lh3.googleusercontent.com/-pn3Dt1J4EK8/VTnSaRlnQWI/AAAAAAAARSk/nbhSQ4brVeI/w467-h831-no/ERR%2Blights.jpg
My cgminer status shows all the pools are alive and getting work:
https://lh4.googleusercontent.com/-OTXCBuTCm6w/VTnU4YajDyI/AAAAAAAARTY/DvTUN27_NEM/w1598-h438-no/cgminer%2Bstatus.PNG
and here is what is output on the cgminer API log:
From the Avalon Wiki page (https://en.bitcoin.it/wiki/Avalon4) below:
https://lh6.googleusercontent.com/-icgq5fKtm9o/VTnS5lXMlkI/AAAAAAAARS0/cEfgWBxD5Pg/w686-h367-no/ERR%2BLights%2BWiki.PNG
It seems as if the machine is failing POST (Sorry, this error is just beyond me at present, please help!) or worse a module is dead, which cannot be good. However as all three machines are showing the same behavior I am hoping it is some other networking issue.
Also sometimes the cgminer API log says this:
https://lh3.googleusercontent.com/-pn3Dt1J4EK8/VTnSaRlnQWI/AAAAAAAARSk/nbhSQ4brVeI/w467-h831-no/ERR%2Blights.jpg
My cgminer status shows all the pools are alive and getting work:
https://lh4.googleusercontent.com/-OTXCBuTCm6w/VTnU4YajDyI/AAAAAAAARTY/DvTUN27_NEM/w1598-h438-no/cgminer%2Bstatus.PNG
and here is what is output on the cgminer API log:
Code:
[Firmware Version] => Canaan A4-20150213
luci: 9dc204b
cgminer: 24969c5
cgminer-openwrt-packages: c8ddae8
Reply was 'STATUS=S,When=1429851335,Code=70,Msg=CGMiner stats,Description=cgminer 4.9.0|STATS=0,ID=POOL0,Elapsed=26,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=16.00000000,Max Diff=16.00000000,Min Diff Count=6,Max Diff Count=6,Times Sent=2,Bytes Sent=146,Times Recv=5,Bytes Recv=2609,Net Bytes Sent=146,Net Bytes Recv=2609|STATS=1,ID=POOL1,Elapsed=26,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32.00000000,Min Diff=32.00000000,Max Diff=32.00000000,Min Diff Count=6,Max Diff Count=6,Times Sent=2,Bytes Sent=145,Times Recv=7,Bytes Recv=3760,Net Bytes Sent=145,Net Bytes Recv=3760|STATS=2,ID=POOL2,Elapsed=26,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=127.99804688,Min Diff=127.99804688,Max Diff=127.99804688,Min Diff Count=5,Max Diff Count=5,Times Sent=3,Bytes Sent=219,Times Recv=6,Bytes Recv=21042,Net Bytes Sent=219,Net Bytes Recv=21042|'
[STATUS] =>
(
[STATUS] => S
[When] => 1429851335
[Code ] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.9.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => POOL0
[Elapsed] => 26
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 16.00000000
[Min Diff] => 16.00000000
[Max Diff] => 16.00000000
[Min Diff Count] => 6
[Max Diff Count] => 6
[Times Sent] => 2
[Bytes Sent] => 146
[Times Recv] => 5
[Bytes Recv] => 2609
[Net Bytes Sent] => 146
[Net Bytes Recv] => 2609
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL1
[Elapsed] => 26
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32.00000000
[Min Diff] => 32.00000000
[Max Diff] => 32.00000000
[Min Diff Count] => 6
[Max Diff Count] => 6
[Times Sent] => 2
[Bytes Sent] => 145
[Times Recv] => 7
[Bytes Recv] => 3760
[Net Bytes Sent] => 145
[Net Bytes Recv] => 3760
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL2
[Elapsed] => 26
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 127.99804688
[Min Diff] => 127.99804688
[Max Diff] => 127.99804688
[Min Diff Count] => 5
[Max Diff Count] => 5
[Times Sent] => 3
[Bytes Sent] => 219
[Times Recv] => 6
[Bytes Recv] => 21042
[Net Bytes Sent] => 219
[Net Bytes Recv] => 21042
)
luci: 9dc204b
cgminer: 24969c5
cgminer-openwrt-packages: c8ddae8
Reply was 'STATUS=S,When=1429851335,Code=70,Msg=CGMiner stats,Description=cgminer 4.9.0|STATS=0,ID=POOL0,Elapsed=26,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=16.00000000,Max Diff=16.00000000,Min Diff Count=6,Max Diff Count=6,Times Sent=2,Bytes Sent=146,Times Recv=5,Bytes Recv=2609,Net Bytes Sent=146,Net Bytes Recv=2609|STATS=1,ID=POOL1,Elapsed=26,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32.00000000,Min Diff=32.00000000,Max Diff=32.00000000,Min Diff Count=6,Max Diff Count=6,Times Sent=2,Bytes Sent=145,Times Recv=7,Bytes Recv=3760,Net Bytes Sent=145,Net Bytes Recv=3760|STATS=2,ID=POOL2,Elapsed=26,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=127.99804688,Min Diff=127.99804688,Max Diff=127.99804688,Min Diff Count=5,Max Diff Count=5,Times Sent=3,Bytes Sent=219,Times Recv=6,Bytes Recv=21042,Net Bytes Sent=219,Net Bytes Recv=21042|'
[STATUS] =>
(
[STATUS] => S
[When] => 1429851335
[Code ] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.9.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => POOL0
[Elapsed] => 26
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 16.00000000
[Min Diff] => 16.00000000
[Max Diff] => 16.00000000
[Min Diff Count] => 6
[Max Diff Count] => 6
[Times Sent] => 2
[Bytes Sent] => 146
[Times Recv] => 5
[Bytes Recv] => 2609
[Net Bytes Sent] => 146
[Net Bytes Recv] => 2609
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL1
[Elapsed] => 26
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32.00000000
[Min Diff] => 32.00000000
[Max Diff] => 32.00000000
[Min Diff Count] => 6
[Max Diff Count] => 6
[Times Sent] => 2
[Bytes Sent] => 145
[Times Recv] => 7
[Bytes Recv] => 3760
[Net Bytes Sent] => 145
[Net Bytes Recv] => 3760
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL2
[Elapsed] => 26
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 127.99804688
[Min Diff] => 127.99804688
[Max Diff] => 127.99804688
[Min Diff Count] => 5
[Max Diff Count] => 5
[Times Sent] => 3
[Bytes Sent] => 219
[Times Recv] => 6
[Bytes Recv] => 21042
[Net Bytes Sent] => 219
[Net Bytes Recv] => 21042
)
From the Avalon Wiki page (https://en.bitcoin.it/wiki/Avalon4) below:
https://lh6.googleusercontent.com/-icgq5fKtm9o/VTnS5lXMlkI/AAAAAAAARS0/cEfgWBxD5Pg/w686-h367-no/ERR%2BLights%2BWiki.PNG
It seems as if the machine is failing POST (Sorry, this error is just beyond me at present, please help!) or worse a module is dead, which cannot be good. However as all three machines are showing the same behavior I am hoping it is some other networking issue.
Also sometimes the cgminer API log says this:
Code:
[Firmware Version] => Canaan A4-20150213
luci: 9dc204b
cgminer: 24969c5
cgminer-openwrt-packages: c8ddae8
Socket connect failed: Connection refused
[code]
Can you please help guide me through this issue, I can't wait to hear my new Avalons humming away!
I have been running 4 Avalon3s chained together for almost 6 months without issue so I am not a complete novice when it comes to setting these things up, I just know when to ask for help, and that is now! Please can you help me get my new rig up and running?
[/code] luci: 9dc204b
cgminer: 24969c5
cgminer-openwrt-packages: c8ddae8
Socket connect failed: Connection refused
[code]
Can you please help guide me through this issue, I can't wait to hear my new Avalons humming away!
I have been running 4 Avalon3s chained together for almost 6 months without issue so I am not a complete novice when it comes to setting these things up, I just know when to ask for help, and that is now! Please can you help me get my new rig up and running?
dogie do you have a link to the bitcointalk avalon page. can't find it at the moment. TIA phil
found link
found link
Users thread: https://bitcointalksearch.org/topic/avalon-asic-users-thread-140539
Avalon4 thread: https://bitcointalksearch.org/topic/avalon4-with-global-shipping-can-be-purchased-here-779612
dogie do you have a link to the bitcointalk avalon page. can't find it at the moment. TIA phil
found link
found link
Hi dogie,
On their website: https://ehash.com/product/avalon4-module-1t/ , they advertise 1.3 TH/s. But your guide specify a 1.0 TH/s. Did you try "Turbo mode"?
On their website: https://ehash.com/product/avalon4-module-1t/ , they advertise 1.3 TH/s. But your guide specify a 1.0 TH/s. Did you try "Turbo mode"?
Yes, It goes to 1.3 comfortably and far beyond because the board quality and cooling system has so much headroom. There's not much point going above 1.3TH as you start dropping efficiency quite rapidly.
They changed the 'rating' to 1.3TH because it was getting unfavourable comparisons to other miners that rate at their absolute maximum (ie SP20's '1.7' TH).
Hi dogie,
On their website: https://ehash.com/product/avalon4-module-1t/ , they advertise 1.3 TH/s. But your guide specify a 1.0 TH/s. Did you try "Turbo mode"?
On their website: https://ehash.com/product/avalon4-module-1t/ , they advertise 1.3 TH/s. But your guide specify a 1.0 TH/s. Did you try "Turbo mode"?
I need your help!
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
That is not substantially different. Please don't post the same question in SIX different places, especially when you ask me to come online only to find you offline within 10 minutes of your emails.
Sorry man it was 2 am here!
Sorted over teamviewer
Thanks you Dogie!
Tip is on the way! I will make a review of the miner tonight!
I need your help!
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
That is not substantially different. Please don't post the same question in SIX different places, especially when you ask me to come online only to find you offline within 10 minutes of your emails.
Sorry man it was 2 am here!
Sorted over teamviewer
I need your help!
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
That is not substantially different. Please don't post the same question in SIX different places, especially when you ask me to come online only to find you offline within 10 minutes of your emails.
Sorry man it was 2 am here!
I need your help!
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
That is not substantially different. Please don't post the same question in SIX different places, especially when you ask me to come online only to find you offline within 10 minutes of your emails.
I need your help!
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
And you should also try to remake this guide since the avalon change a lot.
4 X 6 Pcie and its now black.
Firmware is different (if you can install it)
What about noise level measurements? How can we more or less objectively compare it with other mining hardware before buying?
Spent about 30m looking for my proper decibelometer but couldn't find it. Lets put it this way, its the quietest thing in my farm by FAR. Its quieter than the PSU its running on :s
I've slightly underclocked my unit to 900GH, and in a 33C ambient the fan was running @ 1600rpm with unit temps of 44C. The heatsinks on this are excellent, and combined with being only 50% power consumption of a stock SP20 its always going to be very quiet.
Please consider filling out a quick survey about my guides to help improve them! You'll be entered into a raffle to win 2x $20 vouchers as a thank you.
So you should use PCIE 8pin? Or you can use 6pin? Whats the manufacturers reccomendation?
It does make a difference as you need to be sure when people buy their PSU's for these.
It does make a difference as you need to be sure when people buy their PSU's for these.
8 pin if you've got them, although 6 is perfectly fine. Avalon units always have power connections with a large safety margin.
Quote
Temperatures should not be let to rise above 70C
Where did you get this information?? Is it from Avalon chip's datasheet?
No, its just a sensible number. Chips are no where near any boundary under stock cooling as it works so well.
Quote
and you will need a typical computer PSU with 4xPCI-E 6 pin power connector
I'm wondering why does they put 8-pin connectors on miner's boards?..
Thanks for the nice guide and photos. I liked the '360 deg' view photo.
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.
Cheers
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.
Cheers
Correct, they are 8 pin however to keep from confusing people I refer to them as 6 pin as that's what they will have seen on every other miner and are familiar with. If they already know the difference between 6 and 8 pin, then they don't need the information in the first place. Its a bit of a catch 22. You could probably also get away with only 2 PCI-E 6 pin, and even on one cable strand if its 16AWG, but again if you're in a position to use a more extreme arrangement then you likely already know that.
So you should use PCIE 8pin? Or you can use 6pin? Whats the manufacturers reccomendation?
It does make a difference as you need to be sure when people buy their PSU's for these.
What about noise level measurements? How can we more or less objectively compare it with other mining hardware before buying?
Thank you for the great photos.
Keep up the good work.
Do you know if the power supply can be 9v dc like the S5?
Keep up the good work.
Do you know if the power supply can be 9v dc like the S5?
It has full DC2DC so it wouldn't give the intended effect.
Quote
Temperatures should not be let to rise above 70C
Where did you get this information?? Is it from Avalon chip's datasheet?
No, its just a sensible number. Chips are no where near any boundary under stock cooling as it works so well.
Quote
and you will need a typical computer PSU with 4xPCI-E 6 pin power connector
I'm wondering why does they put 8-pin connectors on miner's boards?..
Thanks for the nice guide and photos. I liked the '360 deg' view photo.
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.
Cheers
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.
Cheers
Correct, they are 8 pin however to keep from confusing people I refer to them as 6 pin as that's what they will have seen on every other miner and are familiar with. If they already know the difference between 6 and 8 pin, then they don't need the information in the first place. Its a bit of a catch 22. You could probably also get away with only 2 PCI-E 6 pin, and even on one cable strand if its 16AWG, but again if you're in a position to use a more extreme arrangement then you likely already know that.
Thanks for the nice guide and photos. I liked the '360 deg' view photo.
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.
Cheers
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.
Cheers
Thank you for the great photos.
Keep up the good work.
Do you know if the power supply can be 9v dc like the S5?
Keep up the good work.
Do you know if the power supply can be 9v dc like the S5?
Quote
Temperatures should not be let to rise above 70C
Where did you get this information?? Is it from Avalon chip's datasheet?
Quote
and you will need a typical computer PSU with 4xPCI-E 6 pin power connector
I'm wondering why does they put 8-pin connectors on miner's boards?..
Dogie's Miner Setup Guides:
Nicely formatted version available at dogiecoin.com!
Contents:
0a) What to Expect
0b) What You Need
1) Powering
2) Cooling
3) Case
4a) Configuration (TL-WR703N)
4b) Configuration (Raspberry Pi)
5) Troubleshooting
6) Where to buy
0) What to Expect (top)
The Avalon 4 takes on a new form factor from its predecessor and is now a fully encompassed unit. Each Avalon 4 contains two hashing boards which are
in turn made up of 5 mini hashing boards to increase redundancy. An external controller is required, and can use a modified WR703N router or a Raspberry
Pi. A 4 pin interconnect wire, a 4 pin to micro USB adapter and a micro USB to USB cable is included in the package.
0b) What You Need (top)
You will need a few accessories and a power supply to get started. I recommend buying the controller directly from Avalon as they will preflash it with the
correct firmware.
Click your flag to find everything you need to get started at Amazon!
1) Powering (top)
Avalon 4's do not come with a power supply, and you will need a typical computer PSU with 4xPCI-E 6 pin power connectors. All 4 PCI-E connectors are
required. We also need to tell the PSU to always be on, as there isn't a motherboard to do this. Cut a paper clip into a U and insert it into the green wire
and either black wire to the side of the green wire. Tape it up for safety. The power supply will now be controlled by its switch on the rear socket.
2) Cooling (top)
Each module has its own 120mx38mm NMB-MAT7 4715KL-04W-B560mm fan that sucks air through the sealed case and out the back of the unit. Noise
levels are very reasonable even at 35C ambient and make a change from the Antminer S5 and SpondooliesTech SP20. Fan speeds are automatically
controlled although the user can override fan speeds.
3) Case (top)
Avalon 4's are entirely enclosed in an anodised steel case. A shipped unit weighs 8.7kg and the shipping box measures 230mm x 235mm x 490mm while the
unit weights 8.0kg and measures 160mm x 165mm x 390mm.
Click here to see a 360 degree view!
4a) Configuration (TL-WR703N) (top)
Connectivity has been updated to allow for up to 20 units to be daisy chained off one USB port.
Wiring:
Configuration:
Alternative Subnet Change:
Nicely formatted version available at dogiecoin.com!
Contents:
0a) What to Expect
0b) What You Need
1) Powering
2) Cooling
3) Case
4a) Configuration (TL-WR703N)
4b) Configuration (Raspberry Pi)
5) Troubleshooting
6) Where to buy
0) What to Expect (top)
The Avalon 4 takes on a new form factor from its predecessor and is now a fully encompassed unit. Each Avalon 4 contains two hashing boards which are
in turn made up of 5 mini hashing boards to increase redundancy. An external controller is required, and can use a modified WR703N router or a Raspberry
Pi. A 4 pin interconnect wire, a 4 pin to micro USB adapter and a micro USB to USB cable is included in the package.
| Chips | 40x 28nm Avalon 4 A2322 |
| Hashrate | 1000GH |
| Rated Voltage | 12V |
| Rated Current | 50A |
| Power.Consumption | ~690W |
0b) What You Need (top)
You will need a few accessories and a power supply to get started. I recommend buying the controller directly from Avalon as they will preflash it with the
correct firmware.
Click your flag to find everything you need to get started at Amazon!
1) Powering (top)
Avalon 4's do not come with a power supply, and you will need a typical computer PSU with 4xPCI-E 6 pin power connectors. All 4 PCI-E connectors are
required. We also need to tell the PSU to always be on, as there isn't a motherboard to do this. Cut a paper clip into a U and insert it into the green wire
and either black wire to the side of the green wire. Tape it up for safety. The power supply will now be controlled by its switch on the rear socket.
2) Cooling (top)
Each module has its own 120mx38mm NMB-MAT7 4715KL-04W-B560mm fan that sucks air through the sealed case and out the back of the unit. Noise
levels are very reasonable even at 35C ambient and make a change from the Antminer S5 and SpondooliesTech SP20. Fan speeds are automatically
controlled although the user can override fan speeds.
3) Case (top)
Avalon 4's are entirely enclosed in an anodised steel case. A shipped unit weighs 8.7kg and the shipping box measures 230mm x 235mm x 490mm while the
unit weights 8.0kg and measures 160mm x 165mm x 390mm.
Click here to see a 360 degree view!
4a) Configuration (TL-WR703N) (top)
Connectivity has been updated to allow for up to 20 units to be daisy chained off one USB port.
Wiring:
- Plug one 4 pin cable connected from the 4 pin header on the unit to the micro USB adapter.
- Connect a micro USB to USB cable to the micro USB adapter, and then plug this into your controller.
- More units can be added by plugging another 4 pin cable from the second unit to the first unit's other 4 pin header.
- Plug in a network cable from the WR703N to your router, and power it on.
Configuration:
- Power on the power supply using its switch at the back.
- Make sure or your router's subnet is 0, ie 192.168.0.x. If not then change it to 0, this is just temporary. ***If this is not possible, see below***
- Using a browser, navigate to 192.168.0.100 - this goes to the WR703N's configuration page.
- Login using "root" as the username.
- Navigate to Network -> Interfaces -> WAN -> Edit.
- Change protocol to DHCP and click "Save & Apply".
- Using a browser, navigate to your router and find the IP it has assigned the WR703N and navigate to that IP.
- Navigate to the page Status -> Miner Configuration. Enter your pool information in the below format.
- Navigate to the page "Miner Status" to check mining has started.
- You can then change your router subnet back to whatever you are used to using.
Alternative Subnet Change:
- Unplug your computer from all internet sources.
- Plug in an ethernet cable from the WR703N to your computer.
- Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
- Right click on your ethernet adapter -> Properties.
- Click on "Internet Protocol Version 4" and click properties.
- Select "Use the following IP address" and enter the following:
- IP Address: 192.168.0.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.0.100.
- Plug in an ethernet cable from the WR703N to you router.
- Restart the configuration instructions as above.
| _______________________________________________________________________________ ________________________________________________ |
| Antpool Register! Code: Servers : stratum+tcp://stratum.antpool.com:3333 GHash IO Register!User : username.worker or username_worker - auto creates workers! Password: anypassword Code: Servers : stratum+tcp://us1.ghash.io:3333
User : username.worker - auto creates workers! Password: anypassword Jump to:
|