All good.
Honestly I've never setup a backup pool in minerstat....
Pointing them to the "Hotlanta" stratum manually and that seems to have done it!
I never touched the username only changed the stratum url (the password incorrect may have been incorrectly reported in minerstat)
Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 11. (Read 5352158 times)
July 26, 2022, 08:10:20 PM
July 26, 2022, 08:04:27 PM
The NY server has been offline for about an hour.
I'm awaiting the provider to resolve the network problem with it.
You're 2nd pool should be the Atlanta server so it should have failed over to that one.
If your credentials aren't working, it just means you mistyped it.
Check for spaces on the end and incorrect capitals/lowercase - also if you use a mobile phone, they like to change the first letter.
If you let me know the username or the originating IP I can usually find the typo in the logs.
I respond in discord much faster
I'm awaiting the provider to resolve the network problem with it.
You're 2nd pool should be the Atlanta server so it should have failed over to that one.
If your credentials aren't working, it just means you mistyped it.
Check for spaces on the end and incorrect capitals/lowercase - also if you use a mobile phone, they like to change the first letter.
If you let me know the username or the originating IP I can usually find the typo in the logs.
I respond in discord much faster
July 26, 2022, 07:02:49 PM
Having an issue getting my 4 x S19Pro's connected to the NY stratum for some reason.
They've been plugging away on here for a bit now so I am not sure what the issue maybe.
Tried the regular stratum and getting an error stating wrong username and password.
No changes were made on the miners. Any idea what maybe going on?
What's odd is my Apollo's are still plugging away using the same credentials.
They've been plugging away on here for a bit now so I am not sure what the issue maybe.
Tried the regular stratum and getting an error stating wrong username and password.
No changes were made on the miners. Any idea what maybe going on?
What's odd is my Apollo's are still plugging away using the same credentials.
July 23, 2022, 11:04:43 AM
There are various names for it, but what it means is if your miner requests to use the block version number to increase it's performance.
When you connect to the pool, your miner has to request a version mask to do this.
Sometimes referred to as asicboost or other such names, but it simply uses the block's version number bits to do it.
When you connect to the pool, your miner has to request a version mask to do this.
Sometimes referred to as asicboost or other such names, but it simply uses the block's version number bits to do it.
Thanks guys, much appreciated
July 14, 2022, 09:31:20 PM
There are various names for it, but what it means is if your miner requests to use the block version number to increase it's performance.
When you connect to the pool, your miner has to request a version mask to do this.
Sometimes referred to as asicboost or other such names, but it simply uses the block's version number bits to do it.
When you connect to the pool, your miner has to request a version mask to do this.
Sometimes referred to as asicboost or other such names, but it simply uses the block's version number bits to do it.
July 14, 2022, 09:22:22 PM
Kano,
Can you elaborate on this statement from the help section on your pool?
"If your miner has block version enabled it will also say 'Bv'."
What exactly does that mean or do?
Thanks in advance.
Can you elaborate on this statement from the help section on your pool?
"If your miner has block version enabled it will also say 'Bv'."
What exactly does that mean or do?
Thanks in advance.
July 12, 2022, 12:24:24 AM
I’ll try to flash it to the lastest version on antminer website, but to me it looks like 100% a stock fw. I can’t upload picture here without hosting picture somewhere otherwise I’d show you a screenshot of the main page.
Maybe the new fw will work?
Thanks
Maybe the new fw will work?
Thanks
July 12, 2022, 12:13:37 AM
Oh looks like you posted before my edit. It’s running the stock fw
Alas it is not running the stock fw July 12, 2022, 12:03:38 AM
Oh looks like you posted before my edit. It’s running the stock fw
July 11, 2022, 11:53:57 PM
Hey!
I just joined the solo pool with one machine right now. I’ve set it using the informations on the home page (so did a copy paste from my accounr) and the worker doesn’t appear in the “workers list”.
My S9i is connected and hashing on the pool tho. Solo mining if it helps.
Any ideas?
Since you are running an aftermarket firmware that violates the cgminer license, it wont work.I just joined the solo pool with one machine right now. I’ve set it using the informations on the home page (so did a copy paste from my accounr) and the worker doesn’t appear in the “workers list”.
My S9i is connected and hashing on the pool tho. Solo mining if it helps.
Any ideas?
Being the only main developer left and active on cgminer, I have (for many years) blocked such firmware on the pool
(as it says on the homepage)
July 11, 2022, 11:44:19 PM
Hey!
I just joined the solo pool with one machine right now. I’ve set it using the informations on the home page (so did a copy paste from my accounr) and the worker doesn’t appear in the “workers list”.
My S9i is connected and hashing on the pool tho. Solo mining if it helps.
Any ideas?
Edit:
So the stratum says “dead” while hashing, so I’d guess I’m hashing somewhere else?
I’ve tried the main stratum, phoenix, atlanta, and losangeles with the same results.
Stock S9i fw
I just joined the solo pool with one machine right now. I’ve set it using the informations on the home page (so did a copy paste from my accounr) and the worker doesn’t appear in the “workers list”.
My S9i is connected and hashing on the pool tho. Solo mining if it helps.
Any ideas?
Edit:
So the stratum says “dead” while hashing, so I’d guess I’m hashing somewhere else?
I’ve tried the main stratum, phoenix, atlanta, and losangeles with the same results.
Stock S9i fw
July 06, 2022, 07:37:24 AM
Meanwhile, the pool is growing again.
Well 5.2PH of A1264 93+TH miners on PPLNS for the foreseeable future.
Lets see where this goes
Well 5.2PH of A1264 93+TH miners on PPLNS for the foreseeable future.
Lets see where this goes
May 24, 2022, 12:55:06 AM
Posts Deleted Again? ...
FFS Seriously!
You posted asking someone for a list of other pools.FFS Seriously!
Do that in PM not here.
Quote
I will Try this Pool @Kano - testing it to see how it goes.
Is there any hints on what I could do to Maximize the opportunity to help with HashRate here?
Machines are varied, but Mainly BitMain Antminers for the Time Being.
Any help would be appreciated - Stock FirmWare for the Time being on All Machines.
#crysx #cwi
Hash rate is up to your miner Is there any hints on what I could do to Maximize the opportunity to help with HashRate here?
Machines are varied, but Mainly BitMain Antminers for the Time Being.
Any help would be appreciated - Stock FirmWare for the Time being on All Machines.
#crysx #cwi
Though if you pay for an aftermarket firmware, they will take some of your hash rate, but most get blocked by the pool here.
Reducing stales is by mining to the closest node to you - see the list on the main page https://kano.is/
You can do a standard ping to them all except one: or.kano.is
Miners should point directly to the pool since going via somewhere else will increase latency, increase stales and have a higher risk of orphan or stale blocks.
If you have 2fa enabled, on the workers page you can see exactly where your miner is mining from and to, and can also see if it has connected with block version enabled (some call asicboost)
Thanks Kano ...
So actually publishing Names of other Pools is OK - but asking for them is not?
OK!
I will set a few test machines, but the firmware is stock so there is little I can actually do in terms of changes tothe FirmWare. Our devs don;t mess with FirmWare but We are looking at what makes it tick to remove any percentage based Miners - which is down the line here anyway, not in the near future.
Solo is interesting, as I have tried to Solo in various ways and have not had it work. I am obviously doing something wrong and will attend to that more at a later date also. too Many personal things going on with Health/Hospitalization.
@PhilipMa set a post that detailed points of interest in detail and that helped a great deal, even for a Veteran Miner like Me, in another Thread. I know this Pool may work differently to others, hence the request for More information, but overall it would be Nice to be able to Spread the HashRate over Multiple Pools and Systems without focusing on one. Unless of course it is a small HashRate that the Pool has anyway.
I will attend to this in the coming weeks @Kano.
Thanks Again!
#crysx #cwi
May 24, 2022, 12:45:12 AM
I will Try this Pool @Kano - testing it to see how it goes.
Is there any hints on what I could do to Maximize the opportunity to help with HashRate here?
Machines are varied, but Mainly BitMain Antminers for the Time Being.
Any help would be appreciated - Stock FirmWare for the Time being on All Machines.
#crysx #cwi
Hash rate is up to your miner Is there any hints on what I could do to Maximize the opportunity to help with HashRate here?
Machines are varied, but Mainly BitMain Antminers for the Time Being.
Any help would be appreciated - Stock FirmWare for the Time being on All Machines.
#crysx #cwi
Though if you pay for an aftermarket firmware, they will take some of your hash rate, but most get blocked by the pool here.
Reducing stales is by mining to the closest node to you - see the list on the main page https://kano.is/
You can do a standard ping to them all except one: or.kano.is
Miners should point directly to the pool since going via somewhere else will increase latency, increase stales and have a higher risk of orphan or stale blocks.
If you have 2fa enabled, on the workers page you can see exactly where your miner is mining from and to, and can also see if it has connected with block version enabled (some call asicboost)
Posts Deleted Again? ...
FFS Seriously!
You posted asking someone for a list of other pools.FFS Seriously!
Do that in PM not here.
May 24, 2022, 12:01:15 AM
Posts Deleted Again? ...
FFS Seriously!
I will Try this Pool @Kano - testing it to see how it goes.
Is there any hints on what I could do to Maximize the opportunity to help with HashRate here?
Machines are varied, but Mainly BitMain Antminers for the Time Being.
Any help would be appreciated - Stock FirmWare for the Time being on All Machines.
#crysx #cwi
FFS Seriously!
I will Try this Pool @Kano - testing it to see how it goes.
Is there any hints on what I could do to Maximize the opportunity to help with HashRate here?
Machines are varied, but Mainly BitMain Antminers for the Time Being.
Any help would be appreciated - Stock FirmWare for the Time being on All Machines.
#crysx #cwi
May 23, 2022, 01:02:06 PM
Bump.
December 02, 2021, 09:49:57 PM
...
Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
Discord is probably having a similar problem?Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
When you connect to discord read the first pinned message:
Tell me (in discord) the Discord key from kano.is and I'll give your discord account a role.
That will stop discord timing you out of the channel if you are having problems.
However, you must be logged in to discord when I give you the roll, discord wont allow me to give you a role unless you are in the kanopool channel at the same time as I give you the role.
...
Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
Discord is probably having a similar problem?Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
When you connect to discord read the first pinned message:
Tell me (in discord) the Discord key from kano.is and I'll give your discord account a role.
That will stop discord timing you out of the channel if you are having problems.
However, you must be logged in to discord when I give you the roll, discord wont allow me to give you a role unless you are in the kanopool channel at the same time as I give you the role.
Its e720b87b
December 02, 2021, 09:06:40 PM
...
Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
Discord is probably having a similar problem?Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
When you connect to discord read the first pinned message:
Tell me (in discord) the Discord key from kano.is and I'll give your discord account a role.
That will stop discord timing you out of the channel if you are having problems.
However, you must be logged in to discord when I give you the roll, discord wont allow me to give you a role unless you are in the kanopool channel at the same time as I give you the role.
December 02, 2021, 08:07:03 PM
...
I registered kano pool.Account->settings led me back to homepage and logged me out,
...
I registered kano pool.Account->settings led me back to homepage and logged me out,
...
Web site times out after about 15-20 minutes idle - you need to login again.
It's like a bank, but can often store more money than a typical bank account, so security is tight.
Edit:
I just checked your web access, and it would seem that your device isn't responding to the web server all the time.
It's getting a HTTP 408 happening each time you were logged out - which means there's some timing issue at your end replying to the web server.
Can I join the discord group plz?Still have a lot of questions.
Having this question in mind all the time, just cant help to ask: If I want to tweak the cgminer a bit myself, I only need to do it within the cgminer package and upload it to the Pie, am I right? Or do I have to make a new image file?
December 02, 2021, 06:51:08 PM
...
I registered kano pool.Account->settings led me back to homepage and logged me out,
...
I registered kano pool.Account->settings led me back to homepage and logged me out,
...
Web site times out after about 15-20 minutes idle - you need to login again.
It's like a bank, but can often store more money than a typical bank account, so security is tight.
Edit:
I just checked your web access, and it would seem that your device isn't responding to the web server all the time.
It's getting a HTTP 408 happening each time you were logged out - which means there's some timing issue at your end replying to the web server.
Jump to: