tytanick, thanks for the info and repair. I did not know it contained anything private, I already deleted it. Otherwise, this can be a frequent problem, I sent BTC immediately, within seconds, but confirmation takes several hours
![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
Btw, is there any reason why you blocked me for private messages?
Read my signature in bitcointalk
![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
I didnt blocked You, i am just blocking everyone.
PM on forum makes my life mor ediffucult:)
So i only respond to direct emails
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
Thats the only reason
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
Hi, I have two questions:
1. Did anyone get 8 gpus working on this OS?
2. What does this mean?
Yes, I gues Pandaminers with 8 gpus ? If not then other configurations, yes.
MSI Z270-A PRO
it must have latest firmware !!!
4g encoding.
make integrated gpu as default
disable audio
set pci-gen to auto or 1 or 2 (dont renember right now
![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
)
If you will still have problem i will look into my bios tell me if this worked for you.
Also see what soothaa wrote below, after you check those please tell me which image did worked
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
For those waiting on the info for the MSI Z170A M5 Gaming board and 7x GPU support I finally have it working on both of my boards.
1) Make sure you're running the latest BIOS!
2) Enable 4G
3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES
4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS
5) Plug your monitor into the ONBOARD graphics
6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!)
My 14x GPUs have been stable all night long!
Thx for sharing those info !
thank you for all your hard work!!
I am having an issue I haven't seen anyone else have as I have read/scanned through this thread, and I have been messing with it all night.
I have two rigs with 6 rx470's each,and thanks to simple miner os, I had them all mining at the same time. However when I dual mine with claymore 9.3 eth+dcr my mhz on cards on one rig stay at 7xxmhz instead of the 1100 or so I have them at. I believe this is why the hashrate is low on one rig when I dual mine. The one having issues are visiontek 4gb 470s on an ASUS h170 progamer board.
However I can use the eth miner just fine with the hashrate i'd expect for non-flashed/not overclocked cards. Any input is welcome!
Didnt have an issue with cards in windows 10 however I have never had all of them working. Thank you again! btw I am happy to donate/pay fee for your excellent service/software!
Can you try setting in Overclock:
1100/1900 and powerstage to 6 or 7
If this wont help try setting, also after you set those numbers please do "reboot"
core: 6
memory: 0
it's 64bits only?
OS ? I guess
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
Nobody using 32bit
![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
The power play doesn't not work for me, any advice?
Best Regards
You need to have custom bios with added offset - wolf0 is doing those.
About payments i think i will rebuild the pay system as it current stage it brings more problems than i thought
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
Many people are choosing for example 2$, then special transaction number and account is generated but it will be credited only when you pay exact amount of cash
![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
If you send from exchange then exahcnge is taking some fee and this temporary transaction account receives little less amount of cash so it isnt fully paid
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
In that case i will look into little different idea becasue
simple is key in my system as i dont like to make complicated things
![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
right ?
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
Also i guess i wont be accepting bitcoin as many transactions are not beeing confirmed by the network
LITTLE UPDATE:Also this is our production unit of SSRv2
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
The production line will start doing them in about a week and they should be ready at the very beginning of June (so about 2 weeks from now
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
I decided to make it on black pcb
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ftytanick.tinytake.com%2Fmedia%2F533b3b%3Ffilename%3D1494706425539_13-05-2017-10-13-40.png%26%26type%3Dattachment%26%26%26_felix_session_id%3D472c3c9d2649ad5e4444bdf28f7dd0ac%26salt%3DMTYwMDgxMl81NDU0NjUx&t=644&c=Vlm61qer81KwDg)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ftytanick.tinytake.com%2Fmedia%2F533b3c%3Ffilename%3D1494706440607_13-05-2017-10-13-58.png%26%26type%3Dattachment%26%26%26_felix_session_id%3D472c3c9d2649ad5e4444bdf28f7dd0ac%26salt%3DMTYwMDgxM181NDU0NjUy&t=644&c=uGc0MKTbDOAlwA)
The SimpleRigResetter thread is here so please dont ask here about it
https://bitcointalksearch.org/topic/m.19008748