[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 207.

adore

newbie

Activity: 44

Merit: 0

Quote from: WaveRiderx on February 21, 2018, 10:59:39 PM

remove the captcha from your site please. We can't use password managers when there's captcha there is no reason for captcha nonsense.

also, can you make it so you specify core and mem instead of an offset? unfortunately with the video card drought a few of my rigs contain mixed cards. Same series, different freqs. global offset is not going to work.

also need to add a few miner softwares that are missing.

my password manager can handle it; no reason for you does not mean there is no reason in general

you can set the offsets for each card using a comma

WaveRiderx

member

Activity: 168

Merit: 39

Quote from: chuck732 on February 22, 2018, 12:55:19 AM

Thank you. Do you know how I can actually identify what gpu is in what pcie slot?

Quote from: ?? on ??

Quote from: chuck732 on February 21, 2018, 04:35:04 PM

So does anybody know if you can set the fan speed for each individual card separately using PuTTY?

from first glance it appears not. all settings for cards are global per rig.

From this software? no clue. on windows it's easy

chuck732

member

Activity: 141

Merit: 10

Thank you. Do you know how I can actually identify what gpu is in what pcie slot?

Quote from: ?? on ??

Quote from: chuck732 on February 21, 2018, 04:35:04 PM

So does anybody know if you can set the fan speed for each individual card separately using PuTTY?

from first glance it appears not. all settings for cards are global per rig.

WaveRiderx

member

Activity: 168

Merit: 39

Quote from: jaylash on February 21, 2018, 10:11:12 PM

the mining os software that i downloaded from your website is corrupted. (That's what my computer says when i try to unzip the files. I flashed it and the rig keeps crashing and re-starting.
What should I do?

try downloading it again. nothing wrong with the software. the pc you downloaded to might have bad storage sectors or faulty ram.

WaveRiderx

member

Activity: 168

Merit: 39

remove the captcha from your site please. We can't use password managers when there's captcha there is no reason for captcha nonsense.

also, can you make it so you specify core and mem instead of an offset? unfortunately with the video card drought a few of my rigs contain mixed cards. Same series, different freqs. global offset is not going to work.

also need to add a few miner softwares that are missing.

jaylash

newbie

Activity: 5

Merit: 0

the mining os software that i downloaded from your website is corrupted. (That's what my computer says when i try to unzip the files. I flashed it and the rig keeps crashing and re-starting.
What should I do?

chuck732

member

Activity: 141

Merit: 10

So does anybody know if you can set the fan speed for each individual card separately using PuTTY?

mi2424

newbie

Activity: 8

Merit: 0

~~I am a newbie so please can anyone tell me is there any way to use SMOS with nicehash?~~

Never mind, I found it now

Wolverine_Na

newbie

Activity: 17

Merit: 0

Quote from: fluxy12 on February 20, 2018, 02:16:03 PM

Hello, finally, i did it works, the UI is really cool and easy, the hashrate is also OK.

BUT

with windows 10 my mine (6*RX580 8Gb) use 940 Watts (dual mine eth + xvg)

with HiveOS my mine use 1150 Watts with the same config !!!!

So thats 200W more with SMOS.

My config is perhaps bad :
Core MHz: 1150

Memory MHz: 2120

Core Undervolting: 840

Powerstage: 0

My rigs : Sapphire Nitro RX580 4G Elpida x 6 cards.

Core MHz: 1150
Memory MHz: 1975
Core Undervolting: 850
Powerstage: 3
ETH @ 171

My rigs use 720 Watts < Windows 770 Watts from the wall.

I thing you can try changing Power stage to 3 - 6.
Because Power stage is depended on flashing your vga.
Some cards need 4 but some need 5.

jemzupe

newbie

Activity: 7

Merit: 0

@Tytanic
-any progress at work (or solution) related to not working undervolting Huh

zac123

newbie

Activity: 114

Merit: 0

hello, i only have 2gb GPUs so i was thinking the best things to mine would be:

ZEC
ZENCASH
MONERO
MONA

is this correct?

also what is the best wallet to use with these currencies please?
zac

fluxy12

jr. member

Activity: 145

Merit: 1

Quote from: fluxy12 on February 20, 2018, 02:16:03 PM

Hello, finally, i did it works, the UI is really cool and easy, the hashrate is also OK.

BUT

with windows 10 my mine (6*RX580 8Gb) use 940 Watts (dual mine eth + xvg)

with HiveOS my mine use 1150 Watts with the same config !!!!

So thats 200W more with SMOS.

My config is perhaps bad :
Core MHz: 1150

Memory MHz: 2120

Core Undervolting: 840

Powerstage: 0

So i understand that's not possible to get better undervolt result with SMOS.

I return to Windows 10 because 15 rigs * 200W it is 3000W gained ! cannot pay that for a good UI.

zac123

newbie

Activity: 114

Merit: 0

Hello everyone. Does anyone have some good instructions on how to setup the different miners?
I have my first rig running but I'm getting lots of red lines and I think this is because I haven't configured the minors.

Not sure what details to put in there. Do I need to open a wallet address for each currency or is there a place I can sign up to and just have one wallet for all currencies?

Thanks
Zac

sassouqui1

newbie

Activity: 6

Merit: 0

Helo

i have 9 cards runing and one or two of them are 12°C above the other
but i can't recognize wich one is it
in the motherboard i pluged the riser in a way that from left to right it goes in pci-e 1 to 9
but it's not in this order in simplemining

so do you know how to recognize a card from simpleMining in real life ?

thank you

carafleur

member

Activity: 113

Merit: 10

[email protected]

Quote from: bileq on July 26, 2017, 08:38:41 AM

my P106 mining series gpus came. and i install NVIDIA smos ver. but my gpus not detected? how can i fix that?

MSI GTX 1060 6Go OCV1 are not recognized with latest RX-NV build (v1143)

i did not investigate (yet), they're heating on win10pro now

fluxy12

jr. member

Activity: 145

Merit: 1

Hello, finally, i did it works, the UI is really cool and easy, the hashrate is also OK.

BUT

with windows 10 my mine (6*RX580 8Gb) use 940 Watts (dual mine eth + xvg)

with HiveOS my mine use 1150 Watts with the same config !!!!

So thats 200W more with SMOS.

My config is perhaps bad :
Core MHz: 1150

Memory MHz: 2120

Core Undervolting: 840

Powerstage: 0

JaniBaram

newbie

Activity: 107

Merit: 0

Could someone help me out with this?
I tried adding the custom line -tt but I get the error you need to be root to edit it, now I know that I can set temp and % fan on the SM overclocking but I want to set particular fan speed for every GPU...
I really need to do this as all gpus are getting different temps. Thanks!!

nmullen559

newbie

Activity: 4

Merit: 0

So my rigs are on and running but SMOS is saying they are offline and Suprnova isnt receiving a hash rate from them anymore. This just suddenly happened from know where and I have literally tried everything I can think to do to reboot.

ANy help would be greatly appreciated!!!! Huh

WaveRiderx

member

Activity: 168

Merit: 39

does this OS/software let you specify a voltage? I just noticed in afterburner my voltage curve only sticks to one card no matter how I do it.

adore

newbie

Activity: 44

Merit: 0

Quote from: citronick on February 18, 2018, 11:49:50 AM

Quote from: Dragstar on February 18, 2018, 03:51:15 AM

Quote from: SwaY on February 17, 2018, 03:14:18 AM

Quote from: tytanick on January 28, 2018, 08:17:46 AM

Quote from: ?? on ??

Hi tytanick, do you plan to add the latest version of ethminer (0.13)? It work as well as Claymore for nvidia's gpus without the dev fee when mining ether.

Yes i will add it as there are few requests already.

PHI miner isnt on my list right now.

Is ethminer still on the to-do-list?

Would be great if you could add it - I got a way better performance than with claymore.

Thank You!

He told me he will update it 2 weeks ago but the owner is a lurker only care about $

Being a user since v1..... if you guys only knew how hard this dev worked on this project since 2016, thru the ups and downs, delays, brickbats from haters, nasty posts, hacking, bugs, AMD dramas etc.... I guess some people don't have the patience at all ...

+ people asking same ****ing questions once a day, not reading older posts nor even the help page
this guy takes $2 per rig per month (and not even upfront), any mineable card should make that almost in 1 day! people here have demands like he's taking 10% of your kids, wife, house, car, dog and bank account

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 207. (Read 835838 times)