Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 236. (Read 835838 times)

Can you please add bminer to your SMOS? https://bitcointalksearch.org/topic/annbminer-a-fast-equihashethashcuckaroo29z-miner-for-amdnvidia-gpus-1649-2519271

I have a problem with dstm miner in your SMOS. Using 12 x P106 mining cards, they all work good for about 2-3 hours, after that time, the hashrate is starting to decline from 3700+ Sol/s to 2000 Sol/s for unknown reason. When using ewbf miners, the speed is lower and the machine is restarting more frequently, but the miner stays at 3500+ Sol/s. bminer should be better alternative to both of these miner programs, and I found out that it gives higher performance and also better stability.

you might be getting hacked.
make sure you dont have mport open ,
example for claymore "  -mport -3333 "  as long as u have a dash in front of the port number your ok , but if remove the dash then claymore can receive commands from external source.
but it could totally something else, just wanted to help.

You don't have to like claymore, but very often is a best (fastest) option out there...  And I like whatever is fastest for me

WHY ?? 1 MH instead 26MH !!!

I spent one full day trying to solve that..

Asus mining pro 250
13 x XFX RX580 8GB stock bios
All possible OC settings (currently not overclocked)

ETH - Total Speed: 14.022 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:22
ETH: GPU0 0.876 Mh/s, GPU1 1.317 Mh/s, GPU2 1.642 Mh/s, GPU3 1.642 Mh/s, GPU4 0.657 Mh/s, GPU5 1.317 Mh/s, GPU6 0.000 Mh/s, GPU7
2.629 Mh/s, GPU8 0.876 Mh/s, GPU9 1.317 Mh/s, GPU10 0.000 Mh/s, GPU11 0.875 Mh/s, GPU12 0.876 Mh/s

Rig keeps disappearing from my riglist on SMOS but is actually mining when I go and look at it.

Sometimes it'll reboot and wind up mining an algo that I've never mined(neoscrypt)

Thoughts?

How I can add failovers for claymore ? Where and how to add epools.txt to make it permanent.

I get "Socket was closed remotely by pool"
 When trying to mine ETH (with Ethermine) and DCR (with any pool)
I don't know what might be the issue.. I'm on claymore 10.v2
Can someone help me??
Also a good for pool for DCR? Thanks!

EDIT: -esm 3 was the issue behind this.
However I tried to mine with suprnova.cc pool and all my shares were being rejected. All the pools for decred are looking fishy, I guess i'll try SIA or Pascal.
Any other alternatives for dual mine eth & ?

Anyone? Anything?

"Mining Operating System" is a genius idea. I will try next rig. I do not like claymore and I need some alternaives.

can anyone with asus b250 mining expert share their bios settings with smos?

i have tried many combinations of settings with 9 cards and smos registers each card but mines less tan 4 hashes each card, i have manyhours trying and cant find good answers online

Respected admin,

You have added two new miner, sgminer & gatelessgate, but not given any help for those,

i have tried everything but i am unable to use them on my amd rx 570 12 card rig, plz give correct syntax for both of them. also tell me how we can save config file in for miner in smos.

plz help

thanks.

I can confirm that I have been partially successful in making the Asus Z270-P work with 6 Palit 1060 cards - with one big caveat - two of the cards, GPU0 and GPU2, are only hashing at half capacity.

The jury is still out on whether I'm having hardware or software issue - or both.

I think I'm having several issues at once, which kind of make it hard to track down. I changed two of the cards from 1070's to 1060's in the hope that managing just one type of cards would simplify things but they didn't. I'm also having issues with SMOS web interface changes not pushing through to the rig - it remains stuck on the same algo/currency/pool even though I try to change the rig group to something else, and the OC and Watt settings have no effect. But the strange thing is that the rig reboots after changing the settings, just as if it was restarting because of the changes - but everything remains the same when inspecting the console. This seems like a SMOS issue, but I can't be sure.

The two GPU' s running at half speed could be a nicehash related issue, as some googling around have revealed that people have had issues with this when mining to nicehash. Easiest thing to do would be to change to another pool to see if that made a difference, but then SMOS is refusing to push pool setting changes through, leaving me stuvk with nicehash ATM. Bit of a catch 22.

I was thinking I'd try Pimp OS as soon as I have a little spare time just to see how that affects things, but ATM I don't have much spare time...

any settings for z270-p? I could get only 7 overclocked  Amd gpus, the 8th was 0 mh and crashed the rig

I currrently have 8 GPU's on ASUS z270-a, ASUS z270-p and ASUS B250H, They all working flawlesly. You can take your pick.

Hi all,

Can anybody recommend a LGA 1151 mainboard which is running 8 (nvidia) GPUs with SMOS?
The mainboards specially designed for mining purposes are all sold out so I'd like to know if maybe a ASUS Z270P would work.

I have spent hours in trying to get a 7-8 GPU setup work with a MSI Z170A with SMOS. The best I can achieve is 3 GPUs.

Thank you in advance!

So, still I cannot mine Neoscrypt on NVidia with AMD processor. Please, repair this, now i`m using Windows. It is much profitable.
Tom

Guys what is Your OC settings for RX580? 

my is:
gpu:1150
mem:2150
voltage:900
powerstage:2
temp:67
fan:40

 

so does anyone know how to check any log on smos to see what caused a previous reboot?

My console reports all cards set to 115 watts even though most of them are set to 75,75,75,75,115,155 in OC settings. Any clues? Temps are running way too high currrently and none of my OC changes push through. Help - anyone?

Hello,

You can try different release here : http://download.simplemining.net/