Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 303. (Read 836205 times)

holy cow, I took the update last night and then forgot all about it until I saw your post. My cards ( 4x RX480) were doing 20Mh each and now they are all up to 25.7Mh ...this is good stuff
happy camper now (now if only my zotac 1060 6GB did any better than my 3GB ones ...ugh)

I have tried putting separate OC with "," since im running 5 of one brand (Aorus) and 5 of another (powercolor red dragon).  All 10 are rx580 8gb    If i run 5 of Aorus I get 31mhs and the other 5 powercolor i get 29mhs.   luckly i was able to use same bios on all 10 (not sure if that is a good thing).  When I run all 10 and put individual OC's in it doesnt work correctly.  I suspect that SM has the cards numbered gpu0,1,2,3 and so forth  but when you look at them under the core/mem tab on the main screen of SM, it seems that gpu0 is really gpu1, and so forth.  not sure if im saying it correctly but the pattern of the different hash rates didnt match up correctly until i set them as 1 thru 10 and not 0 thru 9.   either way, I couldnt get them to all work correctly.  It has been a long run trying to get them working.  I ended up lowering the cards that do 31 to the OC settings of the cards that do 29 and sacrifice 10 mhs and just put in one OC.  

My settings are
1200
2145
900
4 powerstage.  (doesent seem to matter what power i select, nothing changes)

pulling 1640w from wall

Thanks to OP.! Everything is running with highrate again.
Someone told me there was a dag fix for simpleos. So i finally had the time to download and flash all my rigs with the new dag fix.. nice to see all my rigs running like it did a few months ago.
Of course earnings went up also because of this.. definitely worth the small fee for such a great miner.

anyone tried to mine ETN Electroneum with simplemining?

if yes, which miner you choose?

Citronic, thanks a lot for this hint..the SimpleMining WebInterface shows nVidia compatibility for sgminer I now switched to ccminer-tpruvot-v2.1 and it works.
However, can I somehow auto-select the hashing algorithm for mining as it is being done with Nicehash on Windows? I understand that with your config proposal I mine Cryptonight/Monero only, any way to automatically switch? Or should I somehow active dual mining? My Windows mining rig with Nicehash automatically switches to the most profitable one..I somehow want this achieved with SMOS

The test-mining started at 7.00pm november 1.

The ClaymoreBTGminer and Claymore Zec miner 12.6 is the same.

Goto https://bitcoingold.org/

They list 3 wallets there.

OR

get the address from an Exchange

I dont think they have opened BTG mining yet

This is a Equihash algo coin no?

NVIDIA cards use EWBF miner

try add :

-allcoins 1

sgminer is for AMD cards.....

For NVIDIA cards use the ccminer v2.1 or the skunk one

-a cryptonight -o stratum+tcp://cryptonight.hk.nicehash.com:3355 -u .NV1000 -p x

Quote from: dopps on November 02, 2017, 10:54:46 AM

Hi,
Just tried out the SimpleMining OS on a rig with 9x GTX1070. ETH mining works fine, but Nicehash does not work. I used sgminer-gm-nh-5.5.5-8 and configured the BTC wallet. Restart the RIG and it starts to compile some nVidia binary. Afterwards lots of errors come (show something with AMD drivers, but no AMD video card is inside).

Config is standard: --no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.eu.nicehash.com:3355 -u 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD.$rigName -p x --rawintensity 1000 -w 8 --text-only

Please see attached photo of what errors are coming.
http://fs1.directupload.net/images/171102/8zb84gtu.jpg

Thanks for any help!

Edit: Added a second screenshot: http://fs1.directupload.net/images/171102/f5xsv9qc.jpg

Hi everyone, i am new in here, and i am a newbie miner.
I have a rigs that doing well for two weeks, but now i have a problem.
My rigs using SMOS, and now i am experiencing PCIE bus error.

[ 7709.848668] pcieport 0000:00:1c.5:    [ 0] Receiver Error       
[ 7709.941891] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
[ 7709.941906] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 7709.941916] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[ 7709.941922] pcieport 0000:00:1c.5:    [ 0] Receiver Error       
[ 7709.941933] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 7709.942581] pcieport 0000:00:1c.5: can't find device of ID00e5
[ 7709.942584] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
[ 7709.942596] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 7709.942604] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[ 7709.942610] pcieport 0000:00:1c.5:    [ 0] Receiver Error       
[ 7709.942619] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 7709.943268] pcieport 0000:00:1c.5: can't find device of ID00e5
[ 7709.943302] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 7709.943950] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)


Please help, what should i do to fix this issues?


I have search in this forum but i found anything.
Thanks before and GBU.

Hi guys, I need your help.
I have 2 rigs, x6 RX580 pulse radeon 8gb per rig, hynix memory.
I've running the dagfix-950mV-nightly.img and I got 177 Mh/s ETH (29.5 mh/s each card) and 5000 Mh/s DCR, dual mining. One day, after one reboot and a new update, both rigs went down to 140 Mh/s without any reason. I've tested all the images availables at the moment, even the new dagfix img located in SMOS. All the images makes the mh/s jumps like a ponie and I had today around -60Mh/s (118 mh/s to 160 mh/s continuously), like the power of three gpus.
I've checked on windows mining and I get the almost 30 mh/s, so there are not a gpu problems, it is something with SMOS and It would be great if someone can help me or even give me any idea to follow, because I only have on my mind continue with windows mining when I was really confortable with SMOS.
Thanks in advance.

Hi,
Just tried out the SimpleMining OS on a rig with 9x GTX1070. ETH mining works fine, but Nicehash does not work. I used sgminer-gm-nh-5.5.5-8 and configured the BTC wallet. Restart the RIG and it starts to compile some nVidia binary. Afterwards lots of errors come (show something with AMD drivers, but no AMD video card is inside).

Config is standard: --no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.eu.nicehash.com:3355 -u 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD.$rigName -p x --rawintensity 1000 -w 8 --text-only

Please see attached photo of what errors are coming.
http://fs1.directupload.net/images/171102/8zb84gtu.jpg

Thanks for any help!

Edit: Added a second screenshot: http://fs1.directupload.net/images/171102/f5xsv9qc.jpg

To add the above, I just realised overclock settings only apply to all but 1 gpu. With the 8 GPU RX 580 rig, only 7 is applied, same goes to the 12 GPU rig.

Does anyone experience the same as what I'm facing?

Love simplemining os, but always encounter difficulties trying to mine different coins.... Is there a page that learn how to make a proper address..  example
-wd 1 -r 1 -epool ubiq.hodlpool.com:8009 -ewal 0x0111197a9324b281fbff9a58789b0c312c1ce073 -eworker $rigName -allpools 1 -mport -3333


Not sure what that code is called exactly

Hi guys,

I like to have Bitcoint Gold Wallet.

Anyone Please tell me how to get it.

Thanks in advance.

Guys, I'm having trouble when going from 4 GTX cards to 6, but I tested both extra GTX cards (5th and 6th) and they both work fine as the 5th card...was there an issue with 6 or more cards? I vaguely remember reading about something like that, but couldn't find it in the help. Thanks in advance.

that is it, after that all you need is to change the email in the txt file and boot from there. I've read some random motherboards refusing to boot from usb, checkout reviews for your board to see if you have one of the unlucky ones

Just downloaded the RX Series img and burned on a USB (tried 3 different, including 3.0 and 2.0 USB sticks) with Etcher.  

System not recognizing it as a bootable drive.

Two partitions are created.  One is unformatted while the other only has the one .txt file on it.

Is it a bad image or am I doing something wrong?

Here is a prtscn from smOS:

https://gyazo.com/ce40337866bb344dd40bd9edf84a3229

Only ETH: 13x RX580 @ 386mh/s @ 1130/2175 ---2050w ---5.3w/mhs

DUAL, ETH+LBRY with same setup, @ ETH: 380mh/s @ LBRY: 1100 ---2550w
DUAL, ETH+DEC ---2430w

It's drawing 2986w from the wall.

I tried out your settings, this is what i'm getting on the 8GPU rig.

stock: 200mh/s @ 9.5w/mhs --- 1871w
Your setting: 164mh/s @ 8.5w/mhs  ---  1398w

Mind sharing your hashrate and power?