Rx vega 56/64 support ?
I had these minning on windows o lbuntu xmr stack
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 299. (Read 835838 times)
November 07, 2017, 10:15:11 PM
November 07, 2017, 09:15:15 PM
I use NV OS - ewbf-0.3.4b - Main Asrock 110 BTC+ - 6 x GTX1070
Updated Bios, but I have problem:
====>
ERROR: invalid device ordinal
Miner ended/crashed. Restarting miner in 10 seconds --------------
Updated Bios, but I have problem:
====>
ERROR: invalid device ordinal
Miner ended/crashed. Restarting miner in 10 seconds --------------
November 07, 2017, 03:42:58 PM
how do I get a remote terminal (putty) to display the mining screen.
I have tried screen -x but it wants to attach to the current terminal session.
I have tried screen -x but it wants to attach to the current terminal session.
November 07, 2017, 02:50:48 PM
Hey Tytanick,
Any chance you could add DSTM's Zcash miner? It appears to be faster than EWBF's by 3-4% and seems like EWBF has fallen asleep with his miner being the top of the leaderboard for NVIDIA Zcash mining for a while.
Thanks,
a miner
Any chance you could add DSTM's Zcash miner? It appears to be faster than EWBF's by 3-4% and seems like EWBF has fallen asleep with his miner being the top of the leaderboard for NVIDIA Zcash mining for a while.
Thanks,
a miner
November 07, 2017, 02:06:40 PM
can you mine XMR with GTX on simpleminer? wich miner is it?
Yes. Use cminer-skunk-krnlx on SMOS for Nvidia cards.Sample:
-a cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u 1PQ5bbvUvfNYKNBLi9d8DGz1DtvuRQTvWW.9 -p x
November 07, 2017, 01:43:07 PM
anyone here have the ASUS B250 19gpu board with SMOS that have restart issues? when i reboot it doesn't work i always have to shut down and turn on
November 07, 2017, 10:38:57 AM
can you mine XMR with GTX on simpleminer? wich miner is it?
ccminer v2.1 OR the skunk one
November 07, 2017, 08:08:11 AM
So I have a 570 modded and in windows on my 6 card rig I get 170 ish hash
Settings on afterburner are:
Cor Voltage -96
Core 1110
Mem 1960
On simpleminer they are stock speed so 130. anyone have the settings for these. Everytime I try and mod them they just stop working. Thanks!
Settings on afterburner are:
Cor Voltage -96
Core 1110
Mem 1960
On simpleminer they are stock speed so 130. anyone have the settings for these. Everytime I try and mod them they just stop working. Thanks!
November 07, 2017, 06:42:25 AM
I had similar experiences with a bunch of mixed brands RX480 running over clocked on SMOS
I established a working setup by starting without ANY OC settings in SMOS
Once this works for a few hours you can start changing 1 parameter after another, every few hours, not all at once
This way you will figure out which parameter or value is too aggressive and you will scale back.
Takes a lot of time but once running it hardly crashes.
I established a working setup by starting without ANY OC settings in SMOS
Once this works for a few hours you can start changing 1 parameter after another, every few hours, not all at once
This way you will figure out which parameter or value is too aggressive and you will scale back.
Takes a lot of time but once running it hardly crashes.
Dear community,
I rely on your support. Days and nights I am struggeling to get SimpleMiningOS working with my four RX580 cards (bios flashed).
They work stable under WindowsX64 under Claymore XMR 9.7 with the following settings:
-cvddc 900
-cclock 1200
-mclock 2080
But when I try to use SimpleMiningOS Claymore claymore-xmr-v10.2 it will run into a reboot loop.
I have tried the following settings in SMOS - unsuccessful:
Core MHz: 1200
Memory MHz: 2080
Core Unvervolting: 900
Powerstage: 6
Target Temperature: 75
Minimum Fan speed %: 30
Tried the same with SMOS claymore XMR 9.7 without luck.
Tried also for ETH Claymore 10.0 with following command in SMOS:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal user.1 -eworker user.1 -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1
What am I doing wrong?
Any help is much appreciated. Thanks and kind regards,
I rely on your support. Days and nights I am struggeling to get SimpleMiningOS working with my four RX580 cards (bios flashed).
They work stable under WindowsX64 under Claymore XMR 9.7 with the following settings:
-cvddc 900
-cclock 1200
-mclock 2080
But when I try to use SimpleMiningOS Claymore claymore-xmr-v10.2 it will run into a reboot loop.
I have tried the following settings in SMOS - unsuccessful:
Core MHz: 1200
Memory MHz: 2080
Core Unvervolting: 900
Powerstage: 6
Target Temperature: 75
Minimum Fan speed %: 30
Tried the same with SMOS claymore XMR 9.7 without luck.
Tried also for ETH Claymore 10.0 with following command in SMOS:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal user.1 -eworker user.1 -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1
What am I doing wrong?
Any help is much appreciated. Thanks and kind regards,
November 07, 2017, 06:26:45 AM
Hello,
Is there a way to get notifications if rig goes offline?
Also i have issue with both of my rigs. One has 6 GPUs Sapphire Radeon RX570 4gb ITX mini - my rig works for several hours and the crashes calling the following error on all of my GPUs: gpu hangs in opencl call exit error
As well as my other rigs it runs between 12 to 15 hours and i get this error on all of the cards.
My cards are moderately clocked and i have tested each of them for days for their maximum but i decide to go with more moderate clocking so i believe is not due to overclock.
Any help will be appreciated.
Is there a way to get notifications if rig goes offline?
Also i have issue with both of my rigs. One has 6 GPUs Sapphire Radeon RX570 4gb ITX mini - my rig works for several hours and the crashes calling the following error on all of my GPUs: gpu hangs in opencl call exit error
As well as my other rigs it runs between 12 to 15 hours and i get this error on all of the cards.
My cards are moderately clocked and i have tested each of them for days for their maximum but i decide to go with more moderate clocking so i believe is not due to overclock.
Any help will be appreciated.
Mining pools such as Nanopool will advise you within a couple of mins if your rigs are offline. They will send you an email. You may also use an app to monitor you mining pool that will alert you immediately. Sorry, cannot help with your error.
November 07, 2017, 06:17:16 AM
Dear community,
I rely on your support. Days and nights I am struggeling to get SimpleMiningOS working with my four RX580 cards (bios flashed).
They work stable under WindowsX64 under Claymore XMR 9.7 with the following settings:
-cvddc 900
-cclock 1200
-mclock 2080
But when I try to use SimpleMiningOS Claymore claymore-xmr-v10.2 it will run into a reboot loop.
I have tried the following settings in SMOS - unsuccessful:
Core MHz: 1200
Memory MHz: 2080
Core Unvervolting: 900
Powerstage: 6
Target Temperature: 75
Minimum Fan speed %: 30
Tried the same with SMOS claymore XMR 9.7 without luck.
Tried also for ETH Claymore 10.0 with following command in SMOS:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal user.1 -eworker user.1 -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1
What am I doing wrong?
Any help is much appreciated. Thanks and kind regards,
I rely on your support. Days and nights I am struggeling to get SimpleMiningOS working with my four RX580 cards (bios flashed).
They work stable under WindowsX64 under Claymore XMR 9.7 with the following settings:
-cvddc 900
-cclock 1200
-mclock 2080
But when I try to use SimpleMiningOS Claymore claymore-xmr-v10.2 it will run into a reboot loop.
I have tried the following settings in SMOS - unsuccessful:
Core MHz: 1200
Memory MHz: 2080
Core Unvervolting: 900
Powerstage: 6
Target Temperature: 75
Minimum Fan speed %: 30
Tried the same with SMOS claymore XMR 9.7 without luck.
Tried also for ETH Claymore 10.0 with following command in SMOS:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal user.1 -eworker user.1 -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1
What am I doing wrong?
Any help is much appreciated. Thanks and kind regards,
November 07, 2017, 05:35:04 AM
Hello to all,
I have 12xsapphire nitro rx580 4gb overclocked gpu’s, H110 asRock motherboard, 8gb ram, and I’m running rig through SMOS, I’m mining ZEN coin and when I start to mine looks like everything is fine. But after 4-6 hours is just crash, restart and show on screen: GPU#0 IS GOING TO USE TOO HIGH INTENSITY (6), NOT ENOUGH GPU MEMORY, INTENSITY VALUE REDUCED (2), GPU#0 ALGORITHM ASM, INTENSITY 2., and list is for all cards, so GPU#1, GPU#2.... I changed also overclock settings but than I make worst, now my settings are 1411/1750, power 6, probably default settings..
Does anybody know good overclock settings for this cards in SMOS or maybe what I can do to keep stable.
Thanks in advance.
I have 12xsapphire nitro rx580 4gb overclocked gpu’s, H110 asRock motherboard, 8gb ram, and I’m running rig through SMOS, I’m mining ZEN coin and when I start to mine looks like everything is fine. But after 4-6 hours is just crash, restart and show on screen: GPU#0 IS GOING TO USE TOO HIGH INTENSITY (6), NOT ENOUGH GPU MEMORY, INTENSITY VALUE REDUCED (2), GPU#0 ALGORITHM ASM, INTENSITY 2., and list is for all cards, so GPU#1, GPU#2.... I changed also overclock settings but than I make worst, now my settings are 1411/1750, power 6, probably default settings..
Does anybody know good overclock settings for this cards in SMOS or maybe what I can do to keep stable.
Thanks in advance.
November 07, 2017, 04:31:29 AM
EWBF/NVDIA
--server btcg.miningspeed.com --user mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName --pass x --port 3092
Optiminer v1.7/AMD
-s btcg.miningspeed.com:3092 -u mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName -p x
[/quote]
Nice sample.
Do you have setting of BTCG for claymore-zec-v12.6?
I tried, but no luck
.[/quote]
this one i use for suprnova
-zpool btg.suprnova.cc:8816 -zwal registeredsprnovauserid.workename -zpsw workerpassword -mport -3333
November 07, 2017, 04:05:15 AM
I have big Problem with my R9 mining rig 2x 290X and one 295X2.
It mines with the RX Software, but I can’t do any changes.
With the R Software (for the R9 Cards) It wont Boot and freezes the screen.
It also doesn’t boot without the cards, system only.
Normally the startroutine of the two SMOS Versions should be the same, but the 1118
For R9 seems to be buggy.
Please can you fix it??? Or give me some help? thanks!!!
It mines with the RX Software, but I can’t do any changes.
With the R Software (for the R9 Cards) It wont Boot and freezes the screen.
It also doesn’t boot without the cards, system only.
Normally the startroutine of the two SMOS Versions should be the same, but the 1118
For R9 seems to be buggy.
Please can you fix it??? Or give me some help? thanks!!!
November 07, 2017, 03:29:29 AM
can you mine XMR with GTX on simpleminer? wich miner is it?
November 06, 2017, 11:41:24 PM
Hi any updates regarding BTG mining ? I have checked every single pool and settings and nothing seems to work on SMOS
works fine with ewbf-0.3.4b
--server btg.suprnova.cc --user ****.$rigName --pass x --port 8816 --allpools
It’s not working with AMD
Sample
EWBF/NVDIA
--server btcg.miningspeed.com --user mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName --pass x --port 3092
Optiminer v1.7/AMD
-s btcg.miningspeed.com:3092 -u mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName -p x
Nice sample.
Do you have setting of BTCG for claymore-zec-v12.6?
I tried, but no luck
. November 06, 2017, 11:38:55 PM
Hello,
I have Rigs with Smos
13x Sapphire RX470 Mining Edition 4GB ( Core: 1250 / Mem: 1950 / Powerstage: 6 / Coreundervolt: 900 ) about 26,6 - 27,2 MH/s
My Problem is that i have a Power Consumption of 1980 Watts.
Can anyone help my to greatly lower the Watts...
We also have the same Rigs with P106-100. They only get 1300 Watt.
I have Rigs with Smos
13x Sapphire RX470 Mining Edition 4GB ( Core: 1250 / Mem: 1950 / Powerstage: 6 / Coreundervolt: 900 ) about 26,6 - 27,2 MH/s
My Problem is that i have a Power Consumption of 1980 Watts.
Can anyone help my to greatly lower the Watts...
We also have the same Rigs with P106-100. They only get 1300 Watt.
You need to find custom bios for your GPU's that will undervolt and change the timings. I had 8 x RX580's that were pulling close to 2000 watts before undervolt bios, now I pull a flat 1468 and average 29-30MH/s per card.
November 06, 2017, 10:55:47 PM
I'm having issues downloading the os. Windows tells me that the image is corrupted. Does anybody know why this might be happening?
November 06, 2017, 02:40:11 PM
Hi any updates regarding BTG mining ? I have checked every single pool and settings and nothing seems to work on SMOS
works fine with ewbf-0.3.4b
--server btg.suprnova.cc --user ****.$rigName --pass x --port 8816 --allpools
It’s not working with AMD
Sample
EWBF/NVDIA
--server btcg.miningspeed.com --user mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName --pass x --port 3092
Optiminer v1.7/AMD
-s btcg.miningspeed.com:3092 -u mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName -p x
November 06, 2017, 12:00:56 PM
Hi any updates regarding BTG mining ? I have checked every single pool and settings and nothing seems to work on SMOS
works fine with ewbf-0.3.4b
--server btg.suprnova.cc --user ****.$rigName --pass x --port 8816 --allpools
It’s not working with AMD
Sample
EWBF/NVDIA
--server btcg.miningspeed.com --user mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName --pass x --port 3092
Optiminer v1.7/AMD
-s btcg.miningspeed.com:3092 -u mxvc3oiidWytyQ2XoSrzT7GpPjUeC1guNt.$rigName -p x
Jump to: