It looks like there was an update to 1104 at some stage this morning maybe 5-6 hours ago? killed my rig but have got it back online but OC settings seem to be screwy.
If i have 2 GPUs installed only 1 applies the OC settings, if I install 3 GPUs then 2 have applied OC settings, but 3rd one looks to run at stock settings.
Also can't control the fan etc on that 3rd GPU.
Using R series image, with 3 x R9 390.
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 401. (Read 835499 times)
July 08, 2017, 12:20:26 AM
July 07, 2017, 09:08:33 PM
Hi im trying to instal the nvidia image but it keeps stoping on 70% and it comes up with a error and also if i click ok it just hangs.
I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
Dont worry thats fine, as per the instructions in red "If you will see error after 14'000'000 sector then its ALL OK !"I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
Setup your config, and all will be fine
July 07, 2017, 01:44:36 PM
Hi im trying to instal the nvidia image but it keeps stoping on 70% and it comes up with a error and also if i click ok it just hangs.
I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
July 07, 2017, 01:42:08 PM
There's new version out: Update 1104 - fixed PowerLimit - it now takes values from 10-400. Still you need to enter correct value for your GPU.
I have some mixed GPUs in one rig (1060 + 970), how can i set separate values for each? I've tried separating values with comma, i think it works for clocks but not for PowerLimit.
I have some mixed GPUs in one rig (1060 + 970), how can i set separate values for each? I've tried separating values with comma, i think it works for clocks but not for PowerLimit.
July 07, 2017, 08:50:36 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
I found out HOW TO MAKE IT WORKING !!!
Install the new rig with the old NV version, then when everything is running, shutdown and put the new USB key with updated version --> Rig goes online.
However the PL limit is still the GPU CORE so be careful, card will pump full power no matter what
Did you just reboot rig with new image flashed on pen? Thats precisely what i did but OS gets stuck and miner stays offline... Honestly at this point i prefer to stay without OC until a stable version comes out and leave my miners mining on NV beta version
July 07, 2017, 05:22:49 AM
Hello there.
I have got some errors while try to connect my 6 rx 570 8gb cards. I was using windows 10 with my 6 gpu and I downloaded the simplemining os. Problem occurs when I start the computer. Miner doesn't work and I get following things in the photo.
Once I got this one: https://ibb.co/gCNK7v
After I tried to change riser slots on motherboard and I got this following:
https://ibb.co/igB1LF
I have got some errors while try to connect my 6 rx 570 8gb cards. I was using windows 10 with my 6 gpu and I downloaded the simplemining os. Problem occurs when I start the computer. Miner doesn't work and I get following things in the photo.
Once I got this one: https://ibb.co/gCNK7v
After I tried to change riser slots on motherboard and I got this following:
https://ibb.co/igB1LF
July 06, 2017, 04:31:25 PM
Guys I am having issues with my simple mining reset rig that just arrived. The directions are a little hard to follow....
I am using windows OS. Just need to know what settings I need to set up on the interface. My computers keep restarting.
So on the right side it says Local Agent.
I set Watchdog Freq to 10 clicked Save and then install for each rig.
I then go to the Configuration section (under the red and green circles)
Set max delay to 250 and Write Config.
My computers are restarting on their own? The computers were running fine so I know its something I screwed up in the settings on SRR.
Thanks for any help
I am using windows OS. Just need to know what settings I need to set up on the interface. My computers keep restarting.
So on the right side it says Local Agent.
I set Watchdog Freq to 10 clicked Save and then install for each rig.
I then go to the Configuration section (under the red and green circles)
Set max delay to 250 and Write Config.
My computers are restarting on their own? The computers were running fine so I know its something I screwed up in the settings on SRR.
Thanks for any help
July 06, 2017, 02:11:07 PM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
I found out HOW TO MAKE IT WORKING !!!
Install the new rig with the old NV version, then when everything is running, shutdown and put the new USB key with updated version --> Rig goes online.
However the PL limit is still the GPU CORE so be careful, card will pump full power no matter what
July 06, 2017, 12:18:12 PM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
If you have the previous 1102, does it automatically apply the new 1103 with OC if you reset the rig?
I'm not game to try it myself, don't want any downtime
July 06, 2017, 10:07:07 AM
how do you disable a gpu simplemining?
July 06, 2017, 09:24:37 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
July 06, 2017, 09:16:41 AM
Kill-a-watt reading from wall: 755watts, 175MHs, 29.xxMHs per card..... not bad at all.
Just tested the new smOS NVIDIA build
6 x ZOTAC 1070 Mini
MSI Z270A Pro, i3-7100, 4GB RAM
Core 200, Memory 900, PL = 110
Target Temp 70, Min Fan 80
===
ETH: 07/05/17-16:23:20 - SHARE FOUND - (GPU 4)
ETH: Share accepted (203 ms)!
ETH: 07/05/17-16:23:21 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 169.205 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.225 Mh/s, GPU1 26.748 Mh/s, GPU2 29.272 Mh/s, GPU3 27.915 Mh/s, GPU4 26.889 Mh/s, GPU5 29.156 Mh/s
GPU0 t=56C fan=80%, GPU1 t=56C fan=80%, GPU2 t=56C fan=80%, GPU3 t=56C fan=80%, GPU4 t=62C fan=80%, GPU5 t=59C fan=80%
ETH: 07/05/17-16:23:38 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 173.970 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.016 Mh/s, GPU1 29.011 Mh/s, GPU2 29.210 Mh/s, GPU3 29.202 Mh/s, GPU4 28.320 Mh/s, GPU5 29.211 Mh/s
ETH: 07/05/17-16:23:41 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 171.878 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:06
===
6 x ZOTAC 1070 Mini
MSI Z270A Pro, i3-7100, 4GB RAM
Core 200, Memory 900, PL = 110
Target Temp 70, Min Fan 80
===
ETH: 07/05/17-16:23:20 - SHARE FOUND - (GPU 4)
ETH: Share accepted (203 ms)!
ETH: 07/05/17-16:23:21 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 169.205 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.225 Mh/s, GPU1 26.748 Mh/s, GPU2 29.272 Mh/s, GPU3 27.915 Mh/s, GPU4 26.889 Mh/s, GPU5 29.156 Mh/s
GPU0 t=56C fan=80%, GPU1 t=56C fan=80%, GPU2 t=56C fan=80%, GPU3 t=56C fan=80%, GPU4 t=62C fan=80%, GPU5 t=59C fan=80%
ETH: 07/05/17-16:23:38 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 173.970 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.016 Mh/s, GPU1 29.011 Mh/s, GPU2 29.210 Mh/s, GPU3 29.202 Mh/s, GPU4 28.320 Mh/s, GPU5 29.211 Mh/s
ETH: 07/05/17-16:23:41 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 171.878 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:06
===
7x Zotac 1070 mini, MSI z170a pro carbon, =880watts of the wall
OC 200, 1400, pl 110, fan min 61% = temp ~64 C
====
ETH: 07/06/17-08:48:54 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 216.324 Mh/s, Total Shares: 2250, Rejected: 12, Time: 11:51
ETH: GPU0 30.933 Mh/s, GPU1 30.943 Mh/s, GPU2 31.015 Mh/s, GPU3 30.681 Mh/s, GPU4 30.990 Mh/s, GPU5 30.878 Mh/s, GPU6 30.884 Mh/s
ETH: 07/06/17-08:48:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 215.319 Mh/s, Total Shares: 2250, Rejected: 12, Time: 11:52
ETH: GPU0 30.674 Mh/s, GPU1 30.846 Mh/s, GPU2 30.400 Mh/s, GPU3 30.910 Mh/s, GPU4 30.961 Mh/s, GPU5 30.835 Mh/s, GPU6 30.692 Mh/s
ETH: 07/06/17-08:49:06 - SHARE FOUND - (GPU 3)
GPU0 t=65C fan=61%, GPU1 t=65C fan=61%, GPU2 t=54C fan=61%, GPU3 t=68C fan=61%, GPU4 t=59C fan=61%, GPU5 t=62C fan=61%, GPU6 t=65C fan=61%
ETH: 07/06/17-08:49:16 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 216.473 Mh/s, Total Shares: 2251, Rejected: 12, Time: 11:52
ETH: GPU0 30.901 Mh/s, GPU1 30.856 Mh/s, GPU2 31.004 Mh/s, GPU3 30.941 Mh/s, GPU4 30.922 Mh/s, GPU5 30.873 Mh/s, GPU6 30.974 Mh/s
I bought and I am building a rig with 7 zotac 1070 8gb mini. and wanted to know is the "OC 200, """1400""", pl 110
IS that 1400 a ram overclock of +1400??? If so, that ram can really oc high, how did you get it that high?
July 06, 2017, 08:38:58 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
July 06, 2017, 04:08:26 AM
I have many issues with the new NV version:
First the PowerLimit settings affects the Core Clock!
I set PL to 81 and I see in the console CoreClock offset 81
On new rigs, (got 12 ATM, installing 6 new with 8 GPU on each) I can't manage to mine with more than 4 GPU.
Of course 4G is enable etc... I use the same settings on all MB...
Here is the reading (display is plugged on MB) https://imgur.com/a/2fceS
First the PowerLimit settings affects the Core Clock!
I set PL to 81 and I see in the console CoreClock offset 81
On new rigs, (got 12 ATM, installing 6 new with 8 GPU on each) I can't manage to mine with more than 4 GPU.
Of course 4G is enable etc... I use the same settings on all MB...
Here is the reading (display is plugged on MB) https://imgur.com/a/2fceS
July 06, 2017, 02:51:27 AM
Kill-a-watt reading from wall: 755watts, 175MHs, 29.xxMHs per card..... not bad at all.
Just tested the new smOS NVIDIA build
6 x ZOTAC 1070 Mini
MSI Z270A Pro, i3-7100, 4GB RAM
Core 200, Memory 900, PL = 110
Target Temp 70, Min Fan 80
===
ETH: 07/05/17-16:23:20 - SHARE FOUND - (GPU 4)
ETH: Share accepted (203 ms)!
ETH: 07/05/17-16:23:21 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 169.205 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.225 Mh/s, GPU1 26.748 Mh/s, GPU2 29.272 Mh/s, GPU3 27.915 Mh/s, GPU4 26.889 Mh/s, GPU5 29.156 Mh/s
GPU0 t=56C fan=80%, GPU1 t=56C fan=80%, GPU2 t=56C fan=80%, GPU3 t=56C fan=80%, GPU4 t=62C fan=80%, GPU5 t=59C fan=80%
ETH: 07/05/17-16:23:38 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 173.970 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.016 Mh/s, GPU1 29.011 Mh/s, GPU2 29.210 Mh/s, GPU3 29.202 Mh/s, GPU4 28.320 Mh/s, GPU5 29.211 Mh/s
ETH: 07/05/17-16:23:41 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 171.878 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:06
===
6 x ZOTAC 1070 Mini
MSI Z270A Pro, i3-7100, 4GB RAM
Core 200, Memory 900, PL = 110
Target Temp 70, Min Fan 80
===
ETH: 07/05/17-16:23:20 - SHARE FOUND - (GPU 4)
ETH: Share accepted (203 ms)!
ETH: 07/05/17-16:23:21 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 169.205 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.225 Mh/s, GPU1 26.748 Mh/s, GPU2 29.272 Mh/s, GPU3 27.915 Mh/s, GPU4 26.889 Mh/s, GPU5 29.156 Mh/s
GPU0 t=56C fan=80%, GPU1 t=56C fan=80%, GPU2 t=56C fan=80%, GPU3 t=56C fan=80%, GPU4 t=62C fan=80%, GPU5 t=59C fan=80%
ETH: 07/05/17-16:23:38 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 173.970 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.016 Mh/s, GPU1 29.011 Mh/s, GPU2 29.210 Mh/s, GPU3 29.202 Mh/s, GPU4 28.320 Mh/s, GPU5 29.211 Mh/s
ETH: 07/05/17-16:23:41 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 171.878 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:06
===
7x Zotac 1070 mini, MSI z170a pro carbon, =880watts of the wall
OC 200, 1400, pl 110, fan min 61% = temp ~64 C
====
ETH: 07/06/17-08:48:54 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 216.324 Mh/s, Total Shares: 2250, Rejected: 12, Time: 11:51
ETH: GPU0 30.933 Mh/s, GPU1 30.943 Mh/s, GPU2 31.015 Mh/s, GPU3 30.681 Mh/s, GPU4 30.990 Mh/s, GPU5 30.878 Mh/s, GPU6 30.884 Mh/s
ETH: 07/06/17-08:48:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 215.319 Mh/s, Total Shares: 2250, Rejected: 12, Time: 11:52
ETH: GPU0 30.674 Mh/s, GPU1 30.846 Mh/s, GPU2 30.400 Mh/s, GPU3 30.910 Mh/s, GPU4 30.961 Mh/s, GPU5 30.835 Mh/s, GPU6 30.692 Mh/s
ETH: 07/06/17-08:49:06 - SHARE FOUND - (GPU 3)
GPU0 t=65C fan=61%, GPU1 t=65C fan=61%, GPU2 t=54C fan=61%, GPU3 t=68C fan=61%, GPU4 t=59C fan=61%, GPU5 t=62C fan=61%, GPU6 t=65C fan=61%
ETH: 07/06/17-08:49:16 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 216.473 Mh/s, Total Shares: 2251, Rejected: 12, Time: 11:52
ETH: GPU0 30.901 Mh/s, GPU1 30.856 Mh/s, GPU2 31.004 Mh/s, GPU3 30.941 Mh/s, GPU4 30.922 Mh/s, GPU5 30.873 Mh/s, GPU6 30.974 Mh/s
July 06, 2017, 02:05:24 AM
nvm... I figured it out. The solution is below.
Code:
miner --server us.zec.slushpool.com --user .$rigName --pass x --port 4444
July 06, 2017, 01:40:52 AM
Is anyone using ewbf on SlushPool? I'm trying to configure the miner and keep getting a 'no server found' error. I've used the following with no luck...
And all of the above with
Any help would be appreciated.
Code:
--server zec.slushpool.com --user .$rigName --pass x --port 4444
--server zec.slushpool.com:4444 --user.$rigName --pass x
--server zec.slushpool.com --user.$rigName --port 4444
--server zec.slushpool.com:4444 --user.$rigName
--server us.zec.slushpool.com --user.$rigName --pass x --port 4444
--server us.zec.slushpool.com:4444 --user.$rigName --pass x
--server us.zec.slushpool.com --user.$rigName --port 4444
--server us.zec.slushpool.com:4444 --user.$rigName
--server zec.slushpool.com:4444 --user
--server zec.slushpool.com --user
--server zec.slushpool.com:4444 --user
--server us.zec.slushpool.com --user
--server us.zec.slushpool.com:4444 --user
--server us.zec.slushpool.com --user
--server us.zec.slushpool.com:4444 --user
And all of the above with
Code:
stratum+tcp://
based on the help page at https://slushpool.com/help/get-started/getting_started_zcashAny help would be appreciated.
July 05, 2017, 02:10:37 PM
Is it sure that by reducing DPM Levels Vcore is decreased for all GPU brands?
Is there a way to check reported voltage with software?
Is there a way to check reported voltage with software?
DPM does nothing to vcore, doesn't matter the brand.
It is supposed that lower vcore equals lower vcore levels, right?
July 05, 2017, 01:59:29 PM
Hi,
I'm new here, first post...
First of all thanks to Tytanick for smOS and his console as well as for today's new NV beta release !
I'm testing right now 4xGTX1070 on Asus H270-Plus.
Core +160 Memory +950, >29.6MHs, power at the wall 150W/card
PL setting do not work at all, at least for me.
Furthermore, it seems that if you leave empty field (text) when overclocking then
the fields are mismatched, thats why tomfullery you see 182 on console for memory
which is actually the 82 you have set for temperature. I had the same issue. It's not
a problem if you fill all the fields.
Hope Tytanick read this and will fix PL issue soon.
Happy mining !
I'm new here, first post...
First of all thanks to Tytanick for smOS and his console as well as for today's new NV beta release !
I'm testing right now 4xGTX1070 on Asus H270-Plus.
Core +160 Memory +950, >29.6MHs, power at the wall 150W/card
PL setting do not work at all, at least for me.
Furthermore, it seems that if you leave empty field (text) when overclocking then
the fields are mismatched, thats why tomfullery you see 182 on console for memory
which is actually the 82 you have set for temperature. I had the same issue. It's not
a problem if you fill all the fields.
Hope Tytanick read this and will fix PL issue soon.
Happy mining !
July 05, 2017, 01:34:58 PM
Can someone recomend OC for GTX 1080? Equihash.
I find only for 1080TI
Thank you
I find only for 1080TI
Thank you
Jump to: