The power limit issue is not solved: when I put 70 in powerlimit I see when the rig reboot « core offset 70 » even with the last update. I have checked with a wattmeter and the power usage does not decrease when changing the powerlimit setting.
An easy test: I can put powerlimit 20watt on my cards and they run fine with not power decrease and no crash ...
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 402. (Read 836188 times)
July 08, 2017, 10:08:22 AM
July 08, 2017, 08:57:14 AM
Hi, I’m using Simpleminer-NV-v1103. My rig has 1070 and 1050. I’d like to change Minimum Fan speed to 50% and Target Temperature to 80c but in the setting let me set variable for Power Limit as well. My question is how I can set the Power Limit to default because 1070 needs 160watt and 1050 needs 65watt. Thank you.
July 08, 2017, 07:58:30 AM
Any recommended settings for NVIDIa / smos so far?
July 08, 2017, 07:53:58 AM
Hey guys can i get some help? Everytime i flash new image on to USB drive i get this error when lauchin OS... Still have all my rigs on the older version with no overclock because of this...
http://imgur.com/d1pJ9ym
Anyone with same problem or solution?
Thanks
http://imgur.com/d1pJ9ym
Anyone with same problem or solution?
Thanks
July 08, 2017, 05:12:07 AM
Hey guys I have problem with NV version of SMOS
It looks like this and then it's nothing happening. Tried many reboots, OC settings etc. Any ideas?
Code:
#########################################
Checking connection to simplemining.net ...
There is no v1105 update at this time :(
Downloading and writing new config - OK
Registering rig at simplemining.net ..... #########################################
YOUR EMAIL: xxxx@xxxx
#########################################
Go to simplemining.net and login with your email to manage this rig !
============ Preparing miners =============
============ OVERCLOCKING =================
Applying PowerLimit: 191 watt
Persistence mode is already Enabled for GPU 0000:01:00.0.
All done.
Power limit for GPU 0000:01:00.0 was set to 191.00 W from 165.00 W.
All done.
Applying CoreOffset: 50 MemoryOffset: 250
It looks like this and then it's nothing happening. Tried many reboots, OC settings etc. Any ideas?
Power limit is far too high, OC you memory only, start at 100w for power and go down, Im using 1060's myself, and can wind them down to 80W with a solid overclock of 23.5mh each
I have 1070's I didn't want OC it at all but I guess I have to otherwise SMOS won't even start miner with null values.
July 08, 2017, 05:06:00 AM
Hey guys I have problem with NV version of SMOS
It looks like this and then it's nothing happening. Tried many reboots, OC settings etc. Any ideas?
Code:
#########################################
Checking connection to simplemining.net ...
There is no v1105 update at this time :(
Downloading and writing new config - OK
Registering rig at simplemining.net ..... #########################################
YOUR EMAIL: xxxx@xxxx
#########################################
Go to simplemining.net and login with your email to manage this rig !
============ Preparing miners =============
============ OVERCLOCKING =================
Applying PowerLimit: 191 watt
Persistence mode is already Enabled for GPU 0000:01:00.0.
All done.
Power limit for GPU 0000:01:00.0 was set to 191.00 W from 165.00 W.
All done.
Applying CoreOffset: 50 MemoryOffset: 250
It looks like this and then it's nothing happening. Tried many reboots, OC settings etc. Any ideas?
Power limit is far too high, OC you memory only, start at 100w for power and go down, Im using 1060's myself, and can wind them down to 80W with a solid overclock of 23.5mh each
July 08, 2017, 04:34:55 AM
Hey guys I have problem with NV version of SMOS
It looks like this and then it's nothing happening. Tried many reboots, OC settings etc. Any ideas?
Code:
#########################################
Checking connection to simplemining.net ...
There is no v1105 update at this time :(
Downloading and writing new config - OK
Registering rig at simplemining.net ..... #########################################
YOUR EMAIL: xxxx@xxxx
#########################################
Go to simplemining.net and login with your email to manage this rig !
============ Preparing miners =============
============ OVERCLOCKING =================
Applying PowerLimit: 191 watt
Persistence mode is already Enabled for GPU 0000:01:00.0.
All done.
Power limit for GPU 0000:01:00.0 was set to 191.00 W from 165.00 W.
All done.
Applying CoreOffset: 50 MemoryOffset: 250
It looks like this and then it's nothing happening. Tried many reboots, OC settings etc. Any ideas?
July 07, 2017, 11:20:26 PM
It looks like there was an update to 1104 at some stage this morning maybe 5-6 hours ago? killed my rig but have got it back online but OC settings seem to be screwy.
If i have 2 GPUs installed only 1 applies the OC settings, if I install 3 GPUs then 2 have applied OC settings, but 3rd one looks to run at stock settings.
Also can't control the fan etc on that 3rd GPU.
Using R series image, with 3 x R9 390.
If i have 2 GPUs installed only 1 applies the OC settings, if I install 3 GPUs then 2 have applied OC settings, but 3rd one looks to run at stock settings.
Also can't control the fan etc on that 3rd GPU.
Using R series image, with 3 x R9 390.
July 07, 2017, 08:08:33 PM
Hi im trying to instal the nvidia image but it keeps stoping on 70% and it comes up with a error and also if i click ok it just hangs.
I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
Dont worry thats fine, as per the instructions in red "If you will see error after 14'000'000 sector then its ALL OK !"I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
Setup your config, and all will be fine
July 07, 2017, 12:44:36 PM
Hi im trying to instal the nvidia image but it keeps stoping on 70% and it comes up with a error and also if i click ok it just hangs.
I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
I have attached the image of the error i have tried from 3 diferent PCs and its the same i have tried on ssd or usb flash still the same.
https://www.imageupload.co.uk/image/D0yJ
July 07, 2017, 12:42:08 PM
There's new version out: Update 1104 - fixed PowerLimit - it now takes values from 10-400. Still you need to enter correct value for your GPU.
I have some mixed GPUs in one rig (1060 + 970), how can i set separate values for each? I've tried separating values with comma, i think it works for clocks but not for PowerLimit.
I have some mixed GPUs in one rig (1060 + 970), how can i set separate values for each? I've tried separating values with comma, i think it works for clocks but not for PowerLimit.
July 07, 2017, 07:50:36 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
I found out HOW TO MAKE IT WORKING !!!
Install the new rig with the old NV version, then when everything is running, shutdown and put the new USB key with updated version --> Rig goes online.
However the PL limit is still the GPU CORE so be careful, card will pump full power no matter what
Did you just reboot rig with new image flashed on pen? Thats precisely what i did but OS gets stuck and miner stays offline... Honestly at this point i prefer to stay without OC until a stable version comes out and leave my miners mining on NV beta version
July 07, 2017, 04:22:49 AM
Hello there.
I have got some errors while try to connect my 6 rx 570 8gb cards. I was using windows 10 with my 6 gpu and I downloaded the simplemining os. Problem occurs when I start the computer. Miner doesn't work and I get following things in the photo.
Once I got this one: https://ibb.co/gCNK7v
After I tried to change riser slots on motherboard and I got this following:
https://ibb.co/igB1LF
I have got some errors while try to connect my 6 rx 570 8gb cards. I was using windows 10 with my 6 gpu and I downloaded the simplemining os. Problem occurs when I start the computer. Miner doesn't work and I get following things in the photo.
Once I got this one: https://ibb.co/gCNK7v
After I tried to change riser slots on motherboard and I got this following:
https://ibb.co/igB1LF
July 06, 2017, 03:31:25 PM
Guys I am having issues with my simple mining reset rig that just arrived. The directions are a little hard to follow....
I am using windows OS. Just need to know what settings I need to set up on the interface. My computers keep restarting.
So on the right side it says Local Agent.
I set Watchdog Freq to 10 clicked Save and then install for each rig.
I then go to the Configuration section (under the red and green circles)
Set max delay to 250 and Write Config.
My computers are restarting on their own? The computers were running fine so I know its something I screwed up in the settings on SRR.
Thanks for any help
I am using windows OS. Just need to know what settings I need to set up on the interface. My computers keep restarting.
So on the right side it says Local Agent.
I set Watchdog Freq to 10 clicked Save and then install for each rig.
I then go to the Configuration section (under the red and green circles)
Set max delay to 250 and Write Config.
My computers are restarting on their own? The computers were running fine so I know its something I screwed up in the settings on SRR.
Thanks for any help
July 06, 2017, 01:11:07 PM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
I found out HOW TO MAKE IT WORKING !!!
Install the new rig with the old NV version, then when everything is running, shutdown and put the new USB key with updated version --> Rig goes online.
However the PL limit is still the GPU CORE so be careful, card will pump full power no matter what
July 06, 2017, 11:18:12 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
If you have the previous 1102, does it automatically apply the new 1103 with OC if you reset the rig?
I'm not game to try it myself, don't want any downtime
July 06, 2017, 09:07:07 AM
how do you disable a gpu simplemining?
July 06, 2017, 08:24:37 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Same issue!I have 6 rigs down because of this update :/
July 06, 2017, 08:16:41 AM
Kill-a-watt reading from wall: 755watts, 175MHs, 29.xxMHs per card..... not bad at all.
Just tested the new smOS NVIDIA build
6 x ZOTAC 1070 Mini
MSI Z270A Pro, i3-7100, 4GB RAM
Core 200, Memory 900, PL = 110
Target Temp 70, Min Fan 80
===
ETH: 07/05/17-16:23:20 - SHARE FOUND - (GPU 4)
ETH: Share accepted (203 ms)!
ETH: 07/05/17-16:23:21 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 169.205 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.225 Mh/s, GPU1 26.748 Mh/s, GPU2 29.272 Mh/s, GPU3 27.915 Mh/s, GPU4 26.889 Mh/s, GPU5 29.156 Mh/s
GPU0 t=56C fan=80%, GPU1 t=56C fan=80%, GPU2 t=56C fan=80%, GPU3 t=56C fan=80%, GPU4 t=62C fan=80%, GPU5 t=59C fan=80%
ETH: 07/05/17-16:23:38 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 173.970 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.016 Mh/s, GPU1 29.011 Mh/s, GPU2 29.210 Mh/s, GPU3 29.202 Mh/s, GPU4 28.320 Mh/s, GPU5 29.211 Mh/s
ETH: 07/05/17-16:23:41 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 171.878 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:06
===
6 x ZOTAC 1070 Mini
MSI Z270A Pro, i3-7100, 4GB RAM
Core 200, Memory 900, PL = 110
Target Temp 70, Min Fan 80
===
ETH: 07/05/17-16:23:20 - SHARE FOUND - (GPU 4)
ETH: Share accepted (203 ms)!
ETH: 07/05/17-16:23:21 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 169.205 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.225 Mh/s, GPU1 26.748 Mh/s, GPU2 29.272 Mh/s, GPU3 27.915 Mh/s, GPU4 26.889 Mh/s, GPU5 29.156 Mh/s
GPU0 t=56C fan=80%, GPU1 t=56C fan=80%, GPU2 t=56C fan=80%, GPU3 t=56C fan=80%, GPU4 t=62C fan=80%, GPU5 t=59C fan=80%
ETH: 07/05/17-16:23:38 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 173.970 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 29.016 Mh/s, GPU1 29.011 Mh/s, GPU2 29.210 Mh/s, GPU3 29.202 Mh/s, GPU4 28.320 Mh/s, GPU5 29.211 Mh/s
ETH: 07/05/17-16:23:41 - New job from daggerhashimoto.hk.nicehash.com:3353
ETH - Total Speed: 171.878 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:06
===
7x Zotac 1070 mini, MSI z170a pro carbon, =880watts of the wall
OC 200, 1400, pl 110, fan min 61% = temp ~64 C
====
ETH: 07/06/17-08:48:54 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 216.324 Mh/s, Total Shares: 2250, Rejected: 12, Time: 11:51
ETH: GPU0 30.933 Mh/s, GPU1 30.943 Mh/s, GPU2 31.015 Mh/s, GPU3 30.681 Mh/s, GPU4 30.990 Mh/s, GPU5 30.878 Mh/s, GPU6 30.884 Mh/s
ETH: 07/06/17-08:48:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 215.319 Mh/s, Total Shares: 2250, Rejected: 12, Time: 11:52
ETH: GPU0 30.674 Mh/s, GPU1 30.846 Mh/s, GPU2 30.400 Mh/s, GPU3 30.910 Mh/s, GPU4 30.961 Mh/s, GPU5 30.835 Mh/s, GPU6 30.692 Mh/s
ETH: 07/06/17-08:49:06 - SHARE FOUND - (GPU 3)
GPU0 t=65C fan=61%, GPU1 t=65C fan=61%, GPU2 t=54C fan=61%, GPU3 t=68C fan=61%, GPU4 t=59C fan=61%, GPU5 t=62C fan=61%, GPU6 t=65C fan=61%
ETH: 07/06/17-08:49:16 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 216.473 Mh/s, Total Shares: 2251, Rejected: 12, Time: 11:52
ETH: GPU0 30.901 Mh/s, GPU1 30.856 Mh/s, GPU2 31.004 Mh/s, GPU3 30.941 Mh/s, GPU4 30.922 Mh/s, GPU5 30.873 Mh/s, GPU6 30.974 Mh/s
I bought and I am building a rig with 7 zotac 1070 8gb mini. and wanted to know is the "OC 200, """1400""", pl 110
IS that 1400 a ram overclock of +1400??? If so, that ram can really oc high, how did you get it that high?
July 06, 2017, 07:38:58 AM
You guys are lucky... i have multiple rigs down because i flashed new image on the USB drives and didnt work, OS gets stuck at launch... So i reflashed all pen drives and still same error... Multiple hours down now so i will revert to NV beta version with no overclock... I hope next time we get an email to update our OS at least is to a stable version to ensure nobody looses time or money unnecessary
Jump to: