I have the exactly opossed issue.
I can not modify with web management, only can see the setup.
I can not modify with web management, only can see the setup.
ok - so could be a permission issue? ...
#crysx
Topic: New stratum/getwork proxy with Web-based GUI and pools management - page 13. (Read 120906 times)
March 16, 2015, 07:46:17 AM
ok - so could be a permission issue? ...
#crysx
March 16, 2015, 07:36:36 AM
I have the exactly opossed issue.
I can not modify with web management, only can see the setup.
I can not modify with web management, only can see the setup.
March 16, 2015, 02:31:36 AM
btw - pfool ...
is there anyway of restricting the proxy accessibility via the web? ...
ie - restricting any changes that can be done to the proxy via the web interface? ...
if there is a way of 'just' showing the stats so who ever is looking at it cannot change anything in it - what way would that be? ...
tanx ...
#crysx
is there anyway of restricting the proxy accessibility via the web? ...
ie - restricting any changes that can be done to the proxy via the web interface? ...
if there is a way of 'just' showing the stats so who ever is looking at it cannot change anything in it - what way would that be? ...
tanx ...
#crysx
March 16, 2015, 02:28:08 AM
Hello. Can you help?
Thanks
Thanks
i used to mine here on a regular basis - on port 6666 which is x11 ...
what is the issue? ... or am i missing something here? ...
#crysx
my apologies ...
with the extranonce setting - set it to false in the .conf file ...
you will find that coinking ( as absent as they have been lately ) does not cater for extranonce2 ...
try that and see if it reconnects without issue ...
we use the 0.5.1 version and have no issues with it connecting to coinking ...
#crysx
March 15, 2015, 06:10:19 AM
Hello. Can you help?
Thanks
Thanks
i used to mine here on a regular basis - on port 6666 which is x11 ...
what is the issue? ... or am i missing something here? ...
#crysx
March 15, 2015, 06:01:30 AM
Hello. Can you help?
Thanks
Thanks
i used to mine here on a regular basis - on port 6666 which is x11 ...
what is the issue? ... or am i missing something here? ...
#crysx
March 15, 2015, 05:52:18 AM
Hello. Can you help?
Thanks
Thanks
March 14, 2015, 06:48:25 PM
thx for reply, finally figured it out.
how? ...
#crysx
March 14, 2015, 01:06:02 PM
thx for reply, finally figured it out.
March 14, 2015, 12:53:04 PM
weight 3 for pool2 and weight 1 for pool 3
what weight should i set if i want 45 mins to pool 2 and 15 mins to pool 3 under round robin with 60 mins duration ? pool 1 on all the time if and when it's active, if in active then 45 mins to pool 2 and 15 mins to pool 3. is it even possible ?
found this ... poolMiningDuration = poolWeight * (roundDuration / sumOfWeights)
sumOfWeights = meaning ? total weight used in pool, lets say i plan to use weight 1 &2 so total is 3 ?
tia
found this ... poolMiningDuration = poolWeight * (roundDuration / sumOfWeights)
sumOfWeights = meaning ? total weight used in pool, lets say i plan to use weight 1 &2 so total is 3 ?
tia
March 12, 2015, 06:54:34 PM
what weight should i set if i want 45 mins to pool 2 and 15 mins to pool 3 under round robin with 60 mins duration ? pool 1 on all the time if and when it's active, if in active then 45 mins to pool 2 and 15 mins to pool 3. is it even possible ?
found this ... poolMiningDuration = poolWeight * (roundDuration / sumOfWeights)
sumOfWeights = meaning ? total weight used in pool, lets say i plan to use weight 1 &2 so total is 3 ?
tia
found this ... poolMiningDuration = poolWeight * (roundDuration / sumOfWeights)
sumOfWeights = meaning ? total weight used in pool, lets say i plan to use weight 1 &2 so total is 3 ?
tia
March 12, 2015, 11:44:00 AM
I receive some errors when having multiple miners + nicehash to my proxy.
Also when i try to verify my pool with nicehash it says:
Error: Extranonce2 size is 3 (minimum is 4).
Is there a way to set the minimum Extranonce2 size in the stratum proxy?
Also when i try to verify my pool with nicehash it says:
Error: Extranonce2 size is 3 (minimum is 4).
Is there a way to set the minimum Extranonce2 size in the stratum proxy?
March 09, 2015, 07:40:33 PM
im getting worker authorization errors on pools where i append workernames
it only let the first one connect.
is this intended or a bug ?
update :
if i dont append names and just make a new worker for the proxy, it seems to work.
maybe im being stupid and missunderstanding how this feature works
with all miners not using append they also all get the same difficulty
it only let the first one connect.
is this intended or a bug ?
update :
if i dont append names and just make a new worker for the proxy, it seems to work.
maybe im being stupid and missunderstanding how this feature works
with all miners not using append they also all get the same difficulty
March 08, 2015, 04:31:07 AM
Best open-source proxy ever ! Thank you for posting
February 25, 2015, 08:42:23 AM
+1 this feature request. Was just looking to see if there was some sort of load balance option rather than just failover when a pool goes offline or a rental ends.
In my config there is a line which specifies "failover" as the setting; but I can't find any documentation on if there are any other options- was hoping that because it is in fact listed as a setting there might be other options (such as load balancing which is what I am hoping for).
If anyone knows; that would be great.
Strato
See this for my experience: https://bitcointalksearch.org/topic/m.10317189
February 17, 2015, 05:22:16 PM
February 15, 2015, 06:22:32 AM
Hi again,
I am having trouble with the new version. After sometime, it simply disconnects all my workers and does not accept any new connections. Connection to the pool seems to be fine (the log is full of lines saying that a new block was detected). I tried increasing the available memory (-Xmx1024m) but it didn't help.
The logs are available here: http://girino.org/stratum-proxy/stratum-proxy.log.gz
This problem does not happen with an earlier compile i made (the one where i modified the max number of workers), only with the 6.0 build.
I am having trouble with the new version. After sometime, it simply disconnects all my workers and does not accept any new connections. Connection to the pool seems to be fine (the log is full of lines saying that a new block was detected). I tried increasing the available memory (-Xmx1024m) but it didn't help.
The logs are available here: http://girino.org/stratum-proxy/stratum-proxy.log.gz
This problem does not happen with an earlier compile i made (the one where i modified the max number of workers), only with the 6.0 build.
February 05, 2015, 07:16:13 AM
Did you have any problems with MRR (MiningRigRentals) when testing ?
MRR connects on Port 3333 usually but then redirects me to another Port, lets say 50002, often this redirect does not work so the Pool gets marked as DOWN and tries to reconnect every 5 seconds which still does not work.. A few restarts of the Pool then finally succeed.
If I connect my rigs directly to MRR - no problem.
MRR connects on Port 3333 usually but then redirects me to another Port, lets say 50002, often this redirect does not work so the Pool gets marked as DOWN and tries to reconnect every 5 seconds which still does not work.. A few restarts of the Pool then finally succeed.
If I connect my rigs directly to MRR - no problem.
Could you please send me your log file when you try to use MRR ? MRR surely uses the reconnect stratum notification (which should be supported by the proxy), but unfortunately I was not able to test it for real. It may be a bug in the management of this kind of notification.
I have sent you all my logs directly as PM.
February 03, 2015, 07:34:06 AM
thats too bad. oh well off to the next one. thanks again for the responses.
February 02, 2015, 11:00:49 PM
i tried that also - but will not work ...
spreadcoin is the one i tried using this method with - and the straight stratum method ... both of which failed ...
i too would be interested if this proxy would allow solo mining ...
tanx ...
#crysx
well, for spreadcoin you have two problems:
1- this proxy works with stratum, and solo mining uses "getwork", a different protocol.
2- spreadcoin has severely modified getwork to send a bunch of parameters that are needed for it, but are not present in other coins, so even if this proxy was to support it, it would need lots of changes in order to support spreadcoin.
thanks for the responses
so this proxy only works with stratum pools?
seems that way mate ...
#crysx
Jump to: