Pages:
Author

Topic: Official FutureBit Apollo LTC Image and Support thread (Read 49938 times)

newbie
Activity: 53
Merit: 0
HI, FRIEND
I bought an Apollo 2 Full and we can't boot it, we have flashed the memories, but the cooler is still at full and it doesn't take over the network.
I contacted support and asked them not to send the equipment from Argentina to the USA again if they could send and sell me a flashed memory. What do you advise me to do? My idea is to put several devices in parallel but I need this one to work correctly first.


Have you tried re flashing the software on a different micro sd card 8gb or larger.
https://bitcointalksearch.org/topic/m.48523685

this is what futurebit was supplying last

https://www.amazon.com/SanDisk-Industrial-MicroSD-SDSDQAF3-008G-I-Adapter/dp/B07BZ5SY18/ref=sr_1_1?crid=2QQ9HZ8DIOLME&dib=eyJ2IjoiMSJ9.QBJ5jSNCgG9Frx60JbB2tRxd8oOzNj6N4NAMizytouD3Ga7eo_iJBmqsaWZuB9mCZj1vGyQggO4onct9bVxxRy1zZc7RJsOn9cKcJ18605d9DrNK4OA0Vby1hMohn7nJdsQd22pvfDl5kD5htt4PqW2IMD-cFK1cvYfONN_BZPE75yYyHeQjKWZVw-XUqGNOE0CCKbediwsQJU4qtJi63iR_VjzdGoeYrbfAM0bFTIY.oE-HxWSLjG-y9G9y9BFzqRKJi-Ka0ech5PuWBSobKC8&dib_tag=se&keywords=sandisk+8gb+micro+sd+card&qid=1731595488&sprefix=sandisk+8gb+micro+sd+card%2Caps%2C188&sr=8-1

you can use this to flash your micro sd card


https://etcher.balena.io/
newbie
Activity: 6
Merit: 0
HI, FRIEND
I bought an Apollo 2 Full and we can't boot it, we have flashed the memories, but the cooler is still at full and it doesn't take over the network.
I contacted support and asked them not to send the equipment from Argentina to the USA again if they could send and sell me a flashed memory. What do you advise me to do? My idea is to put several devices in parallel but I need this one to work correctly first.
newbie
Activity: 53
Merit: 0
So after a long time i still have the 64gb stick to run the node, but now i see the litecoin node is up to 90 gb, anyone still using the node function and What type of usb drive are People using that works.
newbie
Activity: 53
Merit: 0
Did you figure what was going on , were you able to fix it.. Having same problem...
Maybe you should to try to contact them via there Webpage https://shop.futurebit.io/ or write a pm to jstefanop for help.
The last time he was online on the Forum was yesterday so i guess a pm would be the best option.
I havnt got this problem at all for the years i was running the Miner , fingers crossed you get some help soon.

SO After a LONG LONG LONNG! time i finally figured it out. For people with ASUS router router you need to turn of Aiprotection
legendary
Activity: 3178
Merit: 3295
Did you figure what was going on , were you able to fix it.. Having same problem...
Maybe you should to try to contact them via there Webpage https://shop.futurebit.io/ or write a pm to jstefanop for help.
The last time he was online on the Forum was yesterday so i guess a pm would be the best option.
I havnt got this problem at all for the years i was running the Miner , fingers crossed you get some help soon.
newbie
Activity: 53
Merit: 0
Hi There,

Greetings..!

i am always getting the below error message  in the Apollo Dash board, can someone help here. Thanks!

It seems there is a problem to communicate with the miner, check error message.

Error: connect ECONNREFUSED 127.0.0.1:4028

Did you figure what was going on , were you able to fix it.. Having same problem...
newbie
Activity: 53
Merit: 0
Has anyone had an issue with the miner not working? I wanted to switch out the fan with the one on Future Bit website, but it does not fit. My power cord stopped working and I think it might have burnt up the plug on the machine. I switched out the PCIE plug but it still does not work. Does Future Bit offer a way to send back to them to get it fixed?
Any suggestions please.
This Thread is Dead, Support here is dead, FutureBit dosent care about the problems we have, I have two miners with issues , and no one cares

Me too. We were supposed to get firmware update like a year or so ago...clearly thats not happening now. One of my PCIe ports is blackened and melted and his only response was for me to pay someone to fix it.


Anyone still mining on these,
newbie
Activity: 53
Merit: 0
Has anyone had an issue with the miner not working? I wanted to switch out the fan with the one on Future Bit website, but it does not fit. My power cord stopped working and I think it might have burnt up the plug on the machine. I switched out the PCIE plug but it still does not work. Does Future Bit offer a way to send back to them to get it fixed?
Any suggestions please.
This Thread is Dead, Support here is dead, FutureBit dosent care about the problems we have, I have two miners with issues , and no one cares

Me too. We were supposed to get firmware update like a year or so ago...clearly thats not happening now. One of my PCIe ports is blackened and melted and his only response was for me to pay someone to fix it.




What are u going to do fix it??
newbie
Activity: 13
Merit: 0
Has anyone had an issue with the miner not working? I wanted to switch out the fan with the one on Future Bit website, but it does not fit. My power cord stopped working and I think it might have burnt up the plug on the machine. I switched out the PCIE plug but it still does not work. Does Future Bit offer a way to send back to them to get it fixed?
Any suggestions please.
This Thread is Dead, Support here is dead, FutureBit dosent care about the problems we have, I have two miners with issues , and no one cares

Me too. We were supposed to get firmware update like a year or so ago...clearly thats not happening now. One of my PCIe ports is blackened and melted and his only response was for me to pay someone to fix it.
newbie
Activity: 53
Merit: 0
Has anyone had an issue with the miner not working? I wanted to switch out the fan with the one on Future Bit website, but it does not fit. My power cord stopped working and I think it might have burnt up the plug on the machine. I switched out the PCIE plug but it still does not work. Does Future Bit offer a way to send back to them to get it fixed?
Any suggestions please.
This Thread is Dead, Support here is dead, FutureBit dosent care about the problems we have, I have two miners with issues , and no one cares
newbie
Activity: 2
Merit: 0
Has anyone had an issue with the miner not working? I wanted to switch out the fan with the one on Future Bit website, but it does not fit. My power cord stopped working and I think it might have burnt up the plug on the machine. I switched out the PCIE plug but it still does not work. Does Future Bit offer a way to send back to them to get it fixed?
Any suggestions please.
newbie
Activity: 53
Merit: 0
What a shame, no support for the LTC miner,
newbie
Activity: 53
Merit: 0
Glad to see no one is having the same issue as me...
newbie
Activity: 53
Merit: 0
anyone in the BAYAREA have a spare Orange Pi Zero, so i can swap it out and see if thats the problem, maybe someone upgraded to the 512mb and has a 256mb laying around
newbie
Activity: 53
Merit: 0
hi , Yall   now in my apollo Ltc i can logg into my dashboard but when i try to start miner, i get     
Error: connect ECONNREFUSED 127.0.0.1:4028

i saw in a question its error in pool credentials, but i check and all is good, what can be the problem this is what i have,,,,,,..... 


stratum+tcp://us2.litecoinpool.org:3333
Username:   estacionsj415.1
Password:   1
newbie
Activity: 53
Merit: 0
Anyone In Da HouSE
newbie
Activity: 53
Merit: 0
i want to start of by replacing the 512MB RAM MCU , has anyone replaced it with a raspberry Pi, i have one laying around,,,, or has anyone replaced it with something else
newbie
Activity: 2
Merit: 0
i have a futurebit apollo, it was working fine, now has a solid red light, what could be wrong with it, can these be sent in for repair and whats the cost

sell it to me Smiley
newbie
Activity: 53
Merit: 0
i have a futurebit apollo, it was working fine, now has a solid red light, what could be wrong with it, can these be sent in for repair and whats the cost
newbie
Activity: 84
Merit: 0
I would like to remote access my 2x Apollo’s. What ports do I need to forward?

Thanks

Can anyone help with this.  Huh

I have forwarded port 80 but get stuck on the setup page, even though the Apollo is working (for months)

Have updated to the latest image and fowarded Ports 80 and 5000 to the Apollo but still no joy logging in remotely (iPhone). It asks for Password but then never loads.

Can anyone help?

I am still not able to login remotely - any advice?

Has anyone else had trouble with remote access to their Apollos?
Pages:
Jump to: