I also want to use merged mining. I have a namecoin adres from cryptsy. How do i sign that?
there is no option to sign within cryptsy
there is no option to sign within cryptsy
I signed with my BTC address and client, go that route.
Topic: [OLD] Eligius: ASIC, no registration, no fee CPPSRB BTC + 105% PPS NMC, 877 # - page 4. (Read 458480 times)
January 28, 2014, 01:03:59 PM
I signed with my BTC address and client, go that route.
January 28, 2014, 12:46:50 PM
I also want to use merged mining. I have a namecoin adres from cryptsy. How do i sign that?
there is no option to sign within cryptsy
there is no option to sign within cryptsy
January 28, 2014, 08:03:45 AM
thanks guys, that's actually encouraging to hear, I may actually try to get an antminer S1
January 28, 2014, 07:19:58 AM
I am mining at eligius with BFL 60GH/s miner. Usually (several months, actually) it averages to 60.7 GH/s, but starting last week it shows 59.9 GH/s
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Did you cycle the power before this happened? In a BFL 65 nm device, you'd like see a drop of more than ,1 GH/s if you had a blown core. I've noticed that the hashrate can differ by 1-1.5 GH/s after powering it off and on. After several hours, it often climbs back up to the usual rate, but sometimes sticks at the lower rate for several days. I then try cycling the power again if it annoys me, but this can leave me with the lower rate that annoyed me. About the only thing you can try is 1) wait a while, or 2) cycle the power. If it were to drop to a steady 54% you could contact them for an RMA, but for a less than 1 GH/s drop, they would likely say the same thing I am. Coincidently, I got this same suggestion from their tech support several months back due to a similar issue with my 50 GH/s unit. Good luck.
Edit: worked like a charm, 1GH/s out of thin air!
January 28, 2014, 07:17:49 AM
http://thegenesisblock.com/mining/ to help figure out costs and return... my question is are the statistics on that site calculated based entirely on the assumption of solo mining?
It does not matter for cumulative return, but in practice - forget about solo mining. No one should mine solo unless you are in control of at least 1% world's hash power. Otherwise it is quite possible you mine your first solo block when block reward will be 12.5 BTC or even 6.25 BTC, or simply put - never
yeah I'd never mine solo, I just had no idea if the numbers quoted on http://thegenesisblock.com/mining were based on solo mining or not(and whether or not it even matters).
basically, all I can seem to buy right now that will deliver in feb is maybe 100-200gh/s miners.... and the thing is, from what I have read, If I pre-order some 2th/s device from cointerra or where ever, I will pretty much have to wait till MAY or later, and everybody says by then the difficulty will be so high that 2th/s will be the equivalent of 200gh/s today.... is that correct?
example product: http://cointerra.com/product/terraminer-iv-2ths-networked-asic-miner-may-batch/ <-- by may that thing will be crap and will never recover the cost is what I've read in other forum posts... people were saying if you want to get into bitcoin mining that you should just buy off the shelf stuff from ebay or whatever reseller has on hand and just giv'er shit with it.
I'm starting to think the only way I can break into this mining business is if I buy a slow 100-200gh/s miner now and at the exact same time pre-order a 2th/s miner from cointerra for 6000... does anybody have a better suggestion, or know of where a person can even get a reasonably priced beginner miner for somebody not really wanting to drop more than $5000
January 28, 2014, 06:37:30 AM
Why does the pool not pay out even I have over 0.04 btc ??
How Long does it take for the payout ??
How Long does it take for the payout ??
January 28, 2014, 02:11:58 AM
so how many btc a day do you get with this pool running 60gh/s? I'm curious because I really want to get into this stuff bad. I think I can get a 60gh/s miner on ebay for $600-700ish I can't remember I saw them earlier today anyway.
edit: I just saw this one right now: http://www.ebay.ca/itm/butterfly-BFL-60-GH-s-mining-rig-fast-ship-/171228601992?pt=LH_DefaultDomain_2&hash=item27de051e88
edit2: this "burnt out power supply" issue these BFL miners have seems super annoying
edit: I just saw this one right now: http://www.ebay.ca/itm/butterfly-BFL-60-GH-s-mining-rig-fast-ship-/171228601992?pt=LH_DefaultDomain_2&hash=item27de051e88
edit2: this "burnt out power supply" issue these BFL miners have seems super annoying
At 90 GH/s, I'm getting roughly 0.02/day, so at 60, I'd expect around 0.013 or so at the current difficulty (which just changed around Friday or thereabouts). His estimate of 0.02 per day in that auction is based on the difficulty about 2-3 weeks ago. These last few difficulty increases have really stung.
The blown PSU isn't a big deal, in the sense that these units run very well with an ATX PSU, perhaps even more stable.
You can calculate expected earnings as follows:
Daily: hashrate*86400/2^32/Difficulty*Reward per block
At 60 Ghps, this is:
60e09/2^32/ 2193847870.1743*86400*25 = 0.0137543 coins per day
Great estimate, NecroBones!
January 28, 2014, 12:04:21 AM
so how many btc a day do you get with this pool running 60gh/s? I'm curious because I really want to get into this stuff bad. I think I can get a 60gh/s miner on ebay for $600-700ish I can't remember I saw them earlier today anyway.
edit: I just saw this one right now: http://www.ebay.ca/itm/butterfly-BFL-60-GH-s-mining-rig-fast-ship-/171228601992?pt=LH_DefaultDomain_2&hash=item27de051e88
edit2: this "burnt out power supply" issue these BFL miners have seems super annoying
edit: I just saw this one right now: http://www.ebay.ca/itm/butterfly-BFL-60-GH-s-mining-rig-fast-ship-/171228601992?pt=LH_DefaultDomain_2&hash=item27de051e88
edit2: this "burnt out power supply" issue these BFL miners have seems super annoying
At 90 GH/s, I'm getting roughly 0.02/day, so at 60, I'd expect around 0.013 or so at the current difficulty (which just changed around Friday or thereabouts). His estimate of 0.02 per day in that auction is based on the difficulty about 2-3 weeks ago. These last few difficulty increases have really stung.
The blown PSU isn't a big deal, in the sense that these units run very well with an ATX PSU, perhaps even more stable.
January 27, 2014, 11:22:26 PM
His figures are a bit off. I'm mining about .18 a day with 80 GH/s. The psu ain't that big of a deal, though.
If there is a pool that will pay 0.18 BTC/day for 80gh/s I'm switching!
I believe you meant 0.018
January 27, 2014, 11:16:52 PM
His figures are a bit off. I'm mining about .18 a day with 80 GH/s. The psu ain't that big of a deal, though.
If there is a pool that will pay 0.18 BTC/day for 80gh/s I'm switching!
I believe you meant 0.018
January 27, 2014, 11:03:30 PM
I am mining at eligius with BFL 60GH/s miner. Usually (several months, actually) it averages to 60.7 GH/s, but starting last week it shows 59.9 GH/s
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Did you cycle the power before this happened? In a BFL 65 nm device, you'd like see a drop of more than ,1 GH/s if you had a blown core. I've noticed that the hashrate can differ by 1-1.5 GH/s after powering it off and on. After several hours, it often climbs back up to the usual rate, but sometimes sticks at the lower rate for several days. I then try cycling the power again if it annoys me, but this can leave me with the lower rate that annoyed me. About the only thing you can try is 1) wait a while, or 2) cycle the power. If it were to drop to a steady 54% you could contact them for an RMA, but for a less than 1 GH/s drop, they would likely say the same thing I am. Coincidently, I got this same suggestion from their tech support several months back due to a similar issue with my 50 GH/s unit. Good luck.
so how many btc a day do you get with this pool running 60gh/s? I'm curious because I really want to get into this stuff bad. I think I can get a 60gh/s miner on ebay for $600-700ish I can't remember I saw them earlier today anyway.
edit: I just saw this one right now: http://www.ebay.ca/itm/butterfly-BFL-60-GH-s-mining-rig-fast-ship-/171228601992?pt=LH_DefaultDomain_2&hash=item27de051e88
edit2: this "burnt out power supply" issue these BFL miners have seems super annoying
January 27, 2014, 10:29:27 PM
I am mining at eligius with BFL 60GH/s miner. Usually (several months, actually) it averages to 60.7 GH/s, but starting last week it shows 59.9 GH/s
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Did you cycle the power before this happened? In a BFL 65 nm device, you'd like see a drop of more than ,1 GH/s if you had a blown core. I've noticed that the hashrate can differ by 1-1.5 GH/s after powering it off and on. After several hours, it often climbs back up to the usual rate, but sometimes sticks at the lower rate for several days. I then try cycling the power again if it annoys me, but this can leave me with the lower rate that annoyed me. About the only thing you can try is 1) wait a while, or 2) cycle the power. If it were to drop to a steady 54% you could contact them for an RMA, but for a less than 1 GH/s drop, they would likely say the same thing I am. Coincidently, I got this same suggestion from their tech support several months back due to a similar issue with my 50 GH/s unit. Good luck.
so how many btc a day do you get with this pool running 60gh/s? I'm curious because I really want to get into this stuff bad. I think I can get a 60gh/s miner on ebay for $600-700ish I can't remember I saw them earlier today anyway.
edit: I just saw this one right now: http://www.ebay.ca/itm/butterfly-BFL-60-GH-s-mining-rig-fast-ship-/171228601992?pt=LH_DefaultDomain_2&hash=item27de051e88
edit2: this "burnt out power supply" issue these BFL miners have seems super annoying
January 27, 2014, 09:53:31 PM
"250.19174185 BTC are ahead in queue, putting this user's payout after a 10 block delay."
This has been happening a lot this week. Have the payout delays gone up since the trouble last weekend?
A big part of what is going on is there is one huge miner in the pool. When their payouts hit the queue, that can be multiple blocks, and if you're behind that, you will have to wait. For example, the most recent payout to the big miner is 118 BTC -- more than 4 blocks worth. I guess that must have been done manually to clear the queue since that's more than one block, although I don't quite understand how that works in the CPPSRB system. Their typical payments are around a full block, which means no one else gets paid (much) for that block, and the queue backs up a bit. On the other hand, when they don't have a payout in the front of the queue, their hash power will help find blocks faster and speed up everyone else's payments.
So with those huge payments going into the queue, things get more irregular, sometimes faster, sometimes slower.
January 27, 2014, 09:47:50 PM
basically, all I can seem to buy right now that will deliver in feb is maybe 100-200gh/s miners.... and the thing is, from what I have read, If I pre-order some 2th/s device from cointerra or where ever, I will pretty much have to wait till MAY or later, and everybody says by then the difficulty will be so high that 2th/s will be the equivalent of 200gh/s today.... is that correct?
Predicting the future difficulty is pure speculation.
January 27, 2014, 09:41:34 PM
I am mining at eligius with BFL 60GH/s miner. Usually (several months, actually) it averages to 60.7 GH/s, but starting last week it shows 59.9 GH/s
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Anyone noticed something similar? If it was hardware issue like one core dead, I believe hashrate would decrease significantly more
Did you cycle the power before this happened? In a BFL 65 nm device, you'd like see a drop of more than ,1 GH/s if you had a blown core. I've noticed that the hashrate can differ by 1-1.5 GH/s after powering it off and on. After several hours, it often climbs back up to the usual rate, but sometimes sticks at the lower rate for several days. I then try cycling the power again if it annoys me, but this can leave me with the lower rate that annoyed me. About the only thing you can try is 1) wait a while, or 2) cycle the power. If it were to drop to a steady 54% you could contact them for an RMA, but for a less than 1 GH/s drop, they would likely say the same thing I am. Coincidently, I got this same suggestion from their tech support several months back due to a similar issue with my 50 GH/s unit. Good luck.
January 27, 2014, 09:31:27 PM
"250.19174185 BTC are ahead in queue, putting this user's payout after a 10 block delay."
This has been happening a lot this week. Have the payout delays gone up since the trouble last weekend?
I've noticed something similar, though not too much more extreme than what I had experienced before things went to hell a little. My first payout after things went back to 'normal' was only a few blocks behind, and the payout came not too long after it should have. Today, it's a little different. I started out way down on the list, and then move up a few hundred sports over the course of 3-4 hours. Before replying to your post, I checked once more, and I've dropped another 30 spots or so. As I mention in a response posted just before this one, I don't receive large payouts, so it's not a big deal to me if I receive the standard payout right on time, or a larger one several hours later. That said, I do notice what you're talking about, and can see where it might be an issue for some. Since the amounts seem right (I have not doubts there), I'd rather be able to see what's going on and know a late payout is coming, as opposed to flying blind and not knowing, despite the fact that I've not had any problems with payouts during the 'troubles.' ~256 BTC does seem to put you on quite a long list, though. Fortunately the order isn't static, and there's a good chance you'll receive your payout before making your way up the list one payout at a time. Still, I'd also be curious to know if this is simply an aftereffect of all the work that had to be undertaken by WK to get the pool and feature back to a state to keep assholes from yelling 'scam!' like so many fucktards on these boards so often do.
I also noticed the same, but I believe it's due to luck and timing.. as in a good string of luck will accelerate payment, a bad string of luck will shelve shares and delay the next payment.
Yeah, that makes sense. I wasn't really trying to throw answers out there (don't think I did lol), but confirming that I'm seeing the same, just not to the same extent. I've not kept an eye on most blocks, but have noticed low luck on the few that I have, but perhaps this goes against your theory. Not sure. I'll know in a few hours whether I'm going to be stuck behind several blocks again. My PC is acting totally wonky, making one of my miners useless, or else I'd look into recent blocks and compare to your thoughts. Again, so far the BTC is still accumulating, so I'm fine with a bit of delay. I'd be curious, though if you've made any observations to support your idea - just out of personal curiosity, not a test.
January 27, 2014, 08:18:45 PM
http://thegenesisblock.com/mining/ to help figure out costs and return... my question is are the statistics on that site calculated based entirely on the assumption of solo mining?
It does not matter for cumulative return, but in practice - forget about solo mining. No one should mine solo unless you are in control of at least 1% world's hash power. Otherwise it is quite possible you mine your first solo block when block reward will be 12.5 BTC or even 6.25 BTC, or simply put - never
yeah I'd never mine solo, I just had no idea if the numbers quoted on http://thegenesisblock.com/mining were based on solo mining or not(and whether or not it even matters).
basically, all I can seem to buy right now that will deliver in feb is maybe 100-200gh/s miners.... and the thing is, from what I have read, If I pre-order some 2th/s device from cointerra or where ever, I will pretty much have to wait till MAY or later, and everybody says by then the difficulty will be so high that 2th/s will be the equivalent of 200gh/s today.... is that correct?
example product: http://cointerra.com/product/terraminer-iv-2ths-networked-asic-miner-may-batch/ <-- by may that thing will be crap and will never recover the cost is what I've read in other forum posts... people were saying if you want to get into bitcoin mining that you should just buy off the shelf stuff from ebay or whatever reseller has on hand and just giv'er shit with it.
I'm starting to think the only way I can break into this mining business is if I buy a slow 100-200gh/s miner now and at the exact same time pre-order a 2th/s miner from cointerra for 6000... does anybody have a better suggestion, or know of where a person can even get a reasonably priced beginner miner for somebody not really wanting to drop more than $5000
January 27, 2014, 07:51:09 PM
Ok, just to be clear. The NMC address has to be a different address than the one I'm using for BTC right ? I got my NMC address from the receive side of Electrum, signed it with the output string from Eligius and verified it with Electrum. It passes on Electrum but not on Eligius.
My BTC address is 1Aynx4ZsKoGptWb2Z2aweCDJWduiGUj9DS
My NMC address is 1FGe2AqfRnj3c4JYjWL4etoVBtrXWFib4K
I get this message to sign with:
My Eligius - 2014-01-27 22:24:13 UTC - NMC_Address=1FGe2AqfRnj3c4JYjWL4etoVBtrXWFib4K
When I paste the reulting signature in the appropriate box on Eligius, it fails. Every time. However, it passes when I verify it with Electrum.
My BTC address is 1Aynx4ZsKoGptWb2Z2aweCDJWduiGUj9DS
My NMC address is 1FGe2AqfRnj3c4JYjWL4etoVBtrXWFib4K
I get this message to sign with:
My Eligius - 2014-01-27 22:24:13 UTC - NMC_Address=1FGe2AqfRnj3c4JYjWL4etoVBtrXWFib4K
When I paste the reulting signature in the appropriate box on Eligius, it fails. Every time. However, it passes when I verify it with Electrum.
When I added my NMC address to Eligius, I just signed with my BTC address. But - your NMC address appears to be a valid BTC address, so you'll first need to get a valid NMC address.
January 27, 2014, 07:08:12 PM
I'm hoping someone can help me with merged mining. I cannot get the signature to pass when I add my nmc address. I've used multiple programs to sign and verify including mtgox, bitcoin-qt, electrum, and just about every other app out there. The sig passes on the application but fails on the website and I've even manually typed in every character rather than copy/paste and it still fails. What am I doing wrong ?
Are you sure you selected the correct address to sign with?I thought I did but the whole thing has me confused now. I put in my NMC address in the appropriate box, which I assume is different from my BTC mining address. I copied and pasted the signing message to electrum, signed it and pasted the results in the signature box. It fails every time.
Quote from: brox
Maybe some strange browser? Try it in another one clearing cookies/caches first
I used Firefox but I'll try something else. Thanks.
I use Electrum as well.
Highlight the receiving address and right click on it. Choose "sign message". Copy the entire "this is the signed message you need to send" line into the message box. Hit sign message, enter your password, then copy the output back into the box on eligius. I've adjusted several times now, without error.
Hope this helps.
January 27, 2014, 06:42:15 PM
Your NMC address will start with a 'N'. It's not a Bitcoin address that you store namecoins in.
https://bitcointalksearch.org/topic/annnmc-namecoin-wallet-qt-with-integrated-name-registration-v375-236375
Download the namecoin client and create a new one, and then use that.
https://bitcointalksearch.org/topic/annnmc-namecoin-wallet-qt-with-integrated-name-registration-v375-236375
Download the namecoin client and create a new one, and then use that.
Ok, thanks to both of you. I'll give it a shot and see what happens.
Jump to: