New release! v1.5.5
http://getpimp.org/downloads.html
Topic: PiMP OS is the fastest and easiest way to mine ALL crypto currencies! - page 20. (Read 83040 times)
June 06, 2014, 09:44:04 AM
June 06, 2014, 09:31:14 AM
If I were to use a wireless adapter with PiMP (namely a TP-Link adapter, not sure the exact model, but I know it works under Ubuntu right out of the box) is there a good chance it would work? When I tried it with BAMT IIRC it didn't work.
It didn't work for me, I had to lug my rig out of the closet and hook it up to a cat-5 to then install the drivers for the wireless dongle.
June 06, 2014, 07:53:36 AM
I don't believe you want to go to 14.6 a lot of people are reporting open cl is broken. It may show an increased hash rate but reports are they get all hw errors. But if you do try let us know 
Steve
Steve
Yep, opencl is broken all to hell.
June 06, 2014, 12:41:04 AM
I don't believe you want to go to 14.6 a lot of people are reporting open cl is broken. It may show an increased hash rate but reports are they get all hw errors. But if you do try let us know
Steve
Steve
June 05, 2014, 06:47:37 PM
Can someone please post a code for upgrading amd catalyst to 14.6 ?
June 05, 2014, 06:39:48 PM
Current version of PiMP doesn't support the A88X chipset. Please fix this. I had PiMP v1.5.4 on two flash drives, all gave unsupported chipset errors.
June 05, 2014, 10:17:11 AM
WTF?! 
P.S. 8GB usb flash used.
Code:
[10:24][root@pimp:~]# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 2.3G 2.3G 0 100% /
udev 10M 0 10M 0% /dev
tmpfs 696M 240K 696M 1% /run
/dev/disk/by-uuid/83d5de74-a795-4eb7-b323-3dc189174285 2.3G 2.3G 0 100% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 1.4G 0 1.4G 0% /run/shm
/dev/sda2 462M 328M 111M 75% /var
/dev/sda3 506M 369M 111M 77% /opt
none 3.4G 12K 3.4G 1% /tmp
Filesystem Size Used Avail Use% Mounted on
rootfs 2.3G 2.3G 0 100% /
udev 10M 0 10M 0% /dev
tmpfs 696M 240K 696M 1% /run
/dev/disk/by-uuid/83d5de74-a795-4eb7-b323-3dc189174285 2.3G 2.3G 0 100% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 1.4G 0 1.4G 0% /run/shm
/dev/sda2 462M 328M 111M 75% /var
/dev/sda3 506M 369M 111M 77% /opt
none 3.4G 12K 3.4G 1% /tmp
Code:
rootfs 2.3G 2.3G 0 100% /
tmpfs 1.4G 0 1.4G 0% /run/shm
none 3.4G 12K 3.4G 1% /tmp
Please use ONE partition.tmpfs 1.4G 0 1.4G 0% /run/shm
none 3.4G 12K 3.4G 1% /tmp
P.S. 8GB usb flash used.
June 05, 2014, 05:51:54 AM
if i pimpupdate my sgminer will it be v5.0? And if so, how can i use multi-algorithm kernel switch miner on pimp?
https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
June 04, 2014, 09:19:40 PM
If I were to use a wireless adapter with PiMP (namely a TP-Link adapter, not sure the exact model, but I know it works under Ubuntu right out of the box) is there a good chance it would work? When I tried it with BAMT IIRC it didn't work.
+1
and amd catalyst 14.6 beta please
June 04, 2014, 06:02:26 PM
If I were to use a wireless adapter with PiMP (namely a TP-Link adapter, not sure the exact model, but I know it works under Ubuntu right out of the box) is there a good chance it would work? When I tried it with BAMT IIRC it didn't work.
June 04, 2014, 02:15:19 PM
BIG news is coming
Also, Can't believe we only have 4 pages of posts.
Also, Can't believe we only have 4 pages of posts.
June 03, 2014, 10:11:46 PM
May i suggest http://getpimp.org/irc.html for help there is almost always a few pimp devs on there. They are very helpfull and eager to help you.
Steve
Steve
June 02, 2014, 10:40:13 PM
Not having much luck with PIMP 1.4.2 on an Asrock H81 Pro BTC motherboard with 6 Sapphire 270's using powered PCI-E USB risers. After boot up xorg shoots the CPU up to 100% for about 3 minutes. Then I get the following fault. I can RDP into the desktop.
Also, when starting any miner they lock up after printing out "Starting miner". A kill -9 will not even kill them. I have to reboot the machine. This machine worked fine using the SMOS distro. Any ideas?
Code:
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.588902] general protection fault: 0000 [#1] SMP
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.588947] Stack:
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.588954] Call Trace:
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.589822] Code: 81 eb ec 5b 5d 41 5c c3 ff c9 48 89 f0 49 b8 00 00 00 00 00 88 ff ff 75 09 4a 8d 34 07 48 89 c7 eb 06 49 01 f8 4c 89 c7 48 89 d1 a4 c3 48 89 f0 48 2b 05 ae 4d 63 00 4c 8b 0d c7 4d 63 00 48
kernel:[ 206.588902] general protection fault: 0000 [#1] SMP
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.588947] Stack:
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.588954] Call Trace:
Message from syslogd@pimp at Jun 2 22:10:03 ...
kernel:[ 206.589822] Code: 81 eb ec 5b 5d 41 5c c3 ff c9 48 89 f0 49 b8 00 00 00 00 00 88 ff ff 75 09 4a 8d 34 07 48 89 c7 eb 06 49 01 f8 4c 89 c7 48 89 d1
Also, when starting any miner they lock up after printing out "Starting miner". A kill -9 will not even kill them. I have to reboot the machine. This machine worked fine using the SMOS distro. Any ideas?
June 02, 2014, 05:02:18 PM
I have PIMP 1.4.2-amd-13.12. Is pimpupdate safe to use? Do I have to stop minining before doing update or I just type pimpupdate in terminal and accept?
I would like to update, so my rig support X13 algo.
I would like to update, so my rig support X13 algo.
no, it's not safe. I tried to update to get X13 to prepare for OPEC coin, but now can't get to the web interface again and I'm doing everything by command line there now
reinstall the pimp on your usb stick, (backup your config before).
then do the update, working fine for me.
June 02, 2014, 04:39:53 PM
I have PIMP 1.4.2-amd-13.12. Is pimpupdate safe to use? Do I have to stop minining before doing update or I just type pimpupdate in terminal and accept?
I would like to update, so my rig support X13 algo.
I would like to update, so my rig support X13 algo.
no, it's not safe. I tried to update to get X13 to prepare for OPEC coin, but now can't get to the web interface again and I'm doing everything by command line there now
June 02, 2014, 04:14:08 PM
I have PIMP 1.4.2-amd-13.12. Is pimpupdate safe to use? Do I have to stop minining before doing update or I just type pimpupdate in terminal and accept?
I would like to update, so my rig support X13 algo.
I would like to update, so my rig support X13 algo.
May 30, 2014, 10:40:27 AM
Can anyone direct me to show how to disable the autologin screen? I do not want anyone to connect a monitor to my rig and do something.
May 29, 2014, 12:08:37 PM
would love to see some extra mining kernels added in the : blake / x13
Please add x13 mod miner,this will be hot
This.
May 29, 2014, 03:36:19 PM
Please implement https://github.com/lasybear/sph-sgminer_x11mod - much faster.
Or just write instructions on how to upgrade
It's in the update-script already, but there's a few manual steps to make it workOr just write instructions on how to upgrade
Good to know. Can anyone write step-by-step how to do this update for PIMP? I guess quite a few people would be happy to donate for such help
cd /opt/
rm -frv sph-sgminer
git clone git://github.com/lasybear/sph-sgminer_x11mod.git
mv ./sph-sgminer_x11mod/ ./sph-sgminer/
cd sph-sgminer
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed
make
make install
BTC: 1Exgv2YhmFeh1fByLNjLGQkb7QT1tyriYC
thanks
May 29, 2014, 10:25:52 AM
Please implement https://github.com/lasybear/sph-sgminer_x11mod - much faster.
Or just write instructions on how to upgrade
It's in the update-script already, but there's a few manual steps to make it workOr just write instructions on how to upgrade
Good to know. Can anyone write step-by-step how to do this update for PIMP? I guess quite a few people would be happy to donate for such help
The current pimpupdate script will break the web interface, so what I did was from terminal to shut down the mining process and manually copy /opt/ifmi/cgminer.x11.conf to /opt/ifmi/cgminer.x11mod.conf and edit it to the "x11mod" kernel
Then I just start with
cd /opt/sph-sgminer_x11mod
./sgminer -c /opt/ifmi/cgminer.x11mod.conf
That will also make the web-interface come to life again so you can see temperatures and so on
It's a temporary fix, but it will give you at least 50% extra while you are waiting for the proper release
Jump to: