Topic: (Review/Guide) WhatsMiner M10 33.0 Th/s, 2145W Bitcoin (SHA-256) ASIC miner - page 11. (Read 24312 times)
November 01, 2018, 02:51:46 PM
November 01, 2018, 06:33:06 PM
At mods you were wrong to delete this:
You have just been sent a personal message by Bitcoin Forum on Bitcoin Forum.
IMPORTANT: Remember, this is just a notification. Please do not reply to this email.
The message they sent you was:
A reply of yours, quoted below, was deleted by a Bitcoin Forum moderator. Posts are most frequently deleted because they are off-topic, though they can also be deleted for other reasons. In the future, please avoid posting things that need to be deleted.
Quote
"let us know when you get it.
here is a facebook link.
https://www.facebook.com/groups/whatsminer/?ref=bookmarks
it is loud
it needs about 2400 watts at 240 volts
it does not run on 120 volts"
Reply to this Personal Message here: https://bitcointalk.org/index.php?action=pm;sa=send;f=inbox;pmsg=9156262;quote;u=0
I get why you did but in my opinion you dissed the new person looking for help and I would simply like his name since you deleted all the posts made today.
I will delete this after I send the info on this to him.
He basically wanted help if needed.
I normally don't complain But your editing should have been less heavy handed.
As from my viewpoint a new guy asking for help should not be treated the way you did.
As I said just give me his name and I will send my post to him.
I made this public in this thread because I am annoyed at your choice of deletions.
you could have erased his quote of the op
deleted fuzzy's post complaining of the long quote
and left my simple polite accurate answer to him
You have just been sent a personal message by Bitcoin Forum on Bitcoin Forum.
IMPORTANT: Remember, this is just a notification. Please do not reply to this email.
The message they sent you was:
A reply of yours, quoted below, was deleted by a Bitcoin Forum moderator. Posts are most frequently deleted because they are off-topic, though they can also be deleted for other reasons. In the future, please avoid posting things that need to be deleted.
Quote
"let us know when you get it.
here is a facebook link.
https://www.facebook.com/groups/whatsminer/?ref=bookmarks
it is loud
it needs about 2400 watts at 240 volts
it does not run on 120 volts"
Reply to this Personal Message here: https://bitcointalk.org/index.php?action=pm;sa=send;f=inbox;pmsg=9156262;quote;u=0
I get why you did but in my opinion you dissed the new person looking for help and I would simply like his name since you deleted all the posts made today.
I will delete this after I send the info on this to him.
He basically wanted help if needed.
I normally don't complain But your editing should have been less heavy handed.
As from my viewpoint a new guy asking for help should not be treated the way you did.
As I said just give me his name and I will send my post to him.
I made this public in this thread because I am annoyed at your choice of deletions.
you could have erased his quote of the op
deleted fuzzy's post complaining of the long quote
and left my simple polite accurate answer to him
November 01, 2018, 06:43:36 PM
I sent a pm concerning the deletions done today.
November 12, 2018, 03:44:46 PM
Well the M10 I have does 68 to 70 watts a th 34500 at 2350 watts = 68.1 watts a th or damn!
And they now are talking about a 44th and a 55th m10s all 16nm truly impressive engineering.
My temps are really good in a 86f room fans are 5000-5100 rpm boards are 73-73-75
I would like a lessor speed just for the ability to have safety from a hot room like 95f
And they now are talking about a 44th and a 55th m10s all 16nm truly impressive engineering.
My temps are really good in a 86f room fans are 5000-5100 rpm boards are 73-73-75
I would like a lessor speed just for the ability to have safety from a hot room like 95f
When you say they are talking about 44th etc, do you mean Pangolin is talking about putting out M10s with those outputs?
October 06, 2018, 05:56:33 PM
Seems like a great unit. I am though waiting to see what Bitmain will come out with. 7nm, should be impressive.
or not..
many of their chips are not the leaders in efficiency .
They sell cheap gear cheap prices been this way for a while in btc miners.
The thing is if they put out a 30th at 2400 watts and sell it at 800-1000 it kills off everyone.
October 06, 2018, 10:23:28 AM
Whatsminer.net says this "Dimension: 13.38″ x 7.87″ x 6.69″ / 34cm x 20cm x 17cm"
Microbt says this "390 mm (L): 130 mm (L): 220 mm (A)"
HaggsFIN or anyone that have it could please measure the total height of this gear? Including the psu.
Thanks
Microbt says this "390 mm (L): 130 mm (L): 220 mm (A)"
HaggsFIN or anyone that have it could please measure the total height of this gear? Including the psu.
Thanks
Hi!
MicroBT has it right.
Please see the technical specifications in my opening post.
I have checked and confirmed it,
those are the right dimensions.
September 25, 2018, 09:57:49 PM
and I just saw the announcement on ebang miner better on paper then this one. 45 watts a th at the wall 44th
Ebang is known for over-promising and under delivering. I got a long email chain with them from before but they seem more true to their word on this one. Time will tell and I think my email chain is getting my a front row seat to maybe getting my hands on on early since they know me on the forums. I might have to join this review bandwagon boys haha.
September 25, 2018, 09:41:55 PM
Whatsminer.net says this "Dimension: 13.38″ x 7.87″ x 6.69″ / 34cm x 20cm x 17cm"
Microbt says this "390 mm (L): 130 mm (L): 220 mm (A)"
HaggsFIN or anyone that have it could please measure the total height of this gear? Including the psu.
Thanks
Microbt says this "390 mm (L): 130 mm (L): 220 mm (A)"
HaggsFIN or anyone that have it could please measure the total height of this gear? Including the psu.
Thanks
September 22, 2018, 04:30:25 AM
To bad market isn't dictating the pricing their retailers, sorry "distributors" are sell these at. Fun to see them in action and the asic competition is fierce to. Great work HF, I sent links to both yours and philips thread to a few manufacturers in hope to draw some new units your way.
and I just saw the announcement on ebang miner better on paper then this one. 45 watts a th at the wall 44th
September 22, 2018, 01:26:06 AM
To bad market isn't dictating the pricing their retailers, sorry "distributors" are sell these at. Fun to see them in action and the asic competition is fierce to. Great work HF, I sent links to both yours and philips thread to a few manufacturers in hope to draw some new units your way.
September 21, 2018, 06:43:53 PM
Great review and write up. They are definitely a company to watch. As it is I could put 3 of these in to replace everything I'm running and and just about double my TH/s
Crazy doing this on 16nm. Hopefully sales go well and they can get their hands on some 7nm.
Crazy doing this on 16nm. Hopefully sales go well and they can get their hands on some 7nm.
September 20, 2018, 08:51:35 PM
Well the M10 I have does 68 to 70 watts a th 34500 at 2350 watts = 68.1 watts a th or damn!
And they now are talking about a 44th and a 55th m10s all 16nm truly impressive engineering.
My temps are really good in a 86f room fans are 5000-5100 rpm boards are 73-73-75
I would like a lessor speed just for the ability to have safety from a hot room like 95f
And they now are talking about a 44th and a 55th m10s all 16nm truly impressive engineering.
My temps are really good in a 86f room fans are 5000-5100 rpm boards are 73-73-75
I would like a lessor speed just for the ability to have safety from a hot room like 95f
Do they give any info on the firmware or a github. If so I can probably make it happen like I did for the S9/i/j
September 20, 2018, 07:35:47 PM
I am really impressed by the M10 being on the 16nm process node. Ever since they released the specifications been waiting for a review. For myself it really reinforces the idea that being first to market on 7nm is not the right move. If there is this much efficiency to be wringed out of 16nm then it would be best to take the time to optimize a full custom ASIC on 7nm.
Well the M10 I have does 68 to 70 watts a th 34500 at 2350 watts = 68.1 watts a th or damn!
And they now are talking about a 44th and a 55th m10s all 16nm truly impressive engineering.
My temps are really good in a 86f room fans are 5000-5100 rpm boards are 73-73-75
I would like a lessor speed just for the ability to have safety from a hot room like 95f
September 20, 2018, 06:59:45 PM
I am really impressed by the M10 being on the 16nm process node. Ever since they released the specifications been waiting for a review. For myself it really reinforces the idea that being first to market on 7nm is not the right move. If there is this much efficiency to be wringed out of 16nm then it would be best to take the time to optimize a full custom ASIC on 7nm.
September 20, 2018, 06:37:29 PM
There is now also a .pdf document version available:
edit: https://mega.nz/#!0kljyJ4T!JwpQiDsLBLU8oDIYL1KSkk6Nv8thJ2l_FsKJAHqAgwM
edit: https://mega.nz/#!0kljyJ4T!JwpQiDsLBLU8oDIYL1KSkk6Nv8thJ2l_FsKJAHqAgwM
September 20, 2018, 05:37:14 PM
I am trying to get on this bandwagon too. My friend that is a bulk buyer got his hands on 1 today but bulk seems to be the best route to get them fast and at a good price.
September 20, 2018, 05:32:43 PM
Thanks for joining me Phil. 
please get us in line for the m10s
this m10 truly rocks
September 20, 2018, 05:30:51 PM
Thanks for joining me Phil.
September 20, 2018, 05:20:44 PM
I have multiple videos on this unit on you tube.
unboxing
https://www.youtube.com/watch?v=1dY5-eLuQYA
running
https://www.youtube.com/watch?v=U7N4YphoaCI
with sound proofing and a db meter
https://www.youtube.com/watch?v=RuPXBR4Zi_U&t=3s
Please go here to see my gear's pool results
http://mmpool.org/statistics
Estimated Payout
Rank Id DGM Estimate PPS Shares Rate (MHash/s)
1 06ae84f6 2.47135566 0.00000000 580,082,921,328 37,932,388
2 a5d78fff 6.86130884 0.00000000 130,161,014,576 0
3 c932f3ed 0.42369032 0.00000000 83,452,123,577 0
4 2d0ba29d 0.41592150 0.00000000 76,255,676,391 18,737,453
5 71602a00 0.42911703 0.00000000 40,068,500,221 33,545,470 here is my miner the m10
I also mined it on ckpool.org and would show a little higher about 34.4
http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr
see bottom for the m10 it is at zero because sadly I only have 1 unit.
unboxing
https://www.youtube.com/watch?v=1dY5-eLuQYA
running
https://www.youtube.com/watch?v=U7N4YphoaCI
with sound proofing and a db meter
https://www.youtube.com/watch?v=RuPXBR4Zi_U&t=3s
Please go here to see my gear's pool results
http://mmpool.org/statistics
Estimated Payout
Rank Id DGM Estimate PPS Shares Rate (MHash/s)
1 06ae84f6 2.47135566 0.00000000 580,082,921,328 37,932,388
2 a5d78fff 6.86130884 0.00000000 130,161,014,576 0
3 c932f3ed 0.42369032 0.00000000 83,452,123,577 0
4 2d0ba29d 0.41592150 0.00000000 76,255,676,391 18,737,453
5 71602a00 0.42911703 0.00000000 40,068,500,221 33,545,470 here is my miner the m10
I also mined it on ckpool.org and would show a little higher about 34.4
http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr
Code:
{
"hashrate1m": "16.5T",
"hashrate5m": "16.8T",
"hashrate1hr": "16.6T",
"hashrate1d": "22.8T",
"hashrate7d": "49.8T",
"lastshare": 1537482411,
"workers": 2,
"shares": 3568674454,
"bestshare": 1310782468.0,
"lns": 15186711710.88827,
"luck": 1.01,
"accumulated": 0.0,
"postponed": 0,
"herp": 15262936743.86358,
"derp": 0.00541567,
"worker": [
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "1.53G",
"hashrate7d": "13.7T",
"lastshare": 1536501801,
"shares": 0,
"bestshare": 0.0,
"lns": 5569183018.302705,
"luck": 1.02,
"herp": 5663491194.108015
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.1",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "0",
"hashrate7d": "168K",
"lastshare": 1526490811,
"shares": 0,
"bestshare": 0.0,
"lns": 44940.20947333366,
"luck": 1.0,
"herp": 44790.46287654358
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.3",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "553",
"hashrate7d": "326G",
"lastshare": 1535406378,
"shares": 0,
"bestshare": 0.0,
"lns": 194288284.8717296,
"luck": 1.01,
"herp": 195298293.9658007
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.4",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "0",
"hashrate7d": "174K",
"lastshare": 1526490864,
"shares": 0,
"bestshare": 0.0,
"lns": 47222.92655935259,
"luck": 0.99,
"herp": 46912.05287448452
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.2",
"hashrate1m": "16.5T",
"hashrate5m": "16.8T",
"hashrate1hr": "16.2T",
"hashrate1d": "15.8T",
"hashrate7d": "15.6T",
"lastshare": 1537482411,
"shares": 1500033472,
"bestshare": 707800330.0,
"lns": 4089375147.846632,
"luck": 1.0,
"herp": 4077826971.504508
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.6",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "0",
"hashrate7d": "3.58K",
"lastshare": 1524402423,
"shares": 0,
"bestshare": 0.0,
"lns": 10443.504100507,
"luck": 0.99,
"herp": 10388.94196551085
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.100",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "0",
"hashrate7d": "1.11K",
"lastshare": 1524935636,
"shares": 0,
"bestshare": 0.0,
"lns": 779.6702822562592,
"luck": 0.99,
"herp": 771.4182643056706
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.Av841",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "0",
"hashrate7d": "16.8K",
"lastshare": 1525982483,
"shares": 0,
"bestshare": 0.0,
"lns": 4894.869740461829,
"luck": 0.99,
"herp": 4858.863561172509
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.turbo1",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "2",
"hashrate7d": "62.4G",
"lastshare": 1534952763,
"shares": 0,
"bestshare": 0.0,
"lns": 41379831.8526477,
"luck": 1.0,
"herp": 41208496.34805906
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.T2Turbo",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "446G",
"hashrate1d": "2.66T",
"hashrate7d": "8.59T",
"lastshare": 1537468216,
"shares": 193836236,
"bestshare": 218091951.0,
"lns": 2832036975.010963,
"luck": 1.0,
"herp": 2829699652.617103
},
{
"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.m10",
"hashrate1m": "0",
"hashrate5m": "0",
"hashrate1hr": "0",
"hashrate1d": "4.34T",
"hashrate7d": "11.5T",
"lastshare": 1537306574,
"shares": 1874804746,
"bestshare": 1310782468.0,
"lns": 2460340171.907783,
"luck": 1.0,
"herp": 2455304413.665182
}
]
}
see bottom for the m10 it is at zero because sadly I only have 1 unit.
September 20, 2018, 04:39:17 PM
Jump to: