Box is decent, I wouldn't want to do that though. Then I've sound proofed my home interior wall, door and frame. All I'm worried about is when the wife is new the machines. That's a bigger headache for me than fan noise.
Thanks for the reads philip.
Topic: (Review/Guide) WhatsMiner M10 33.0 Th/s, 2145W Bitcoin (SHA-256) ASIC miner - page 9. (Read 24268 times)
January 10, 2019, 10:24:48 PM
January 10, 2019, 09:31:44 PM
It is moving to a different spot and will run at 31 th.
my deal in new spot is 50 50 coin spilt and the hoster pays power.
noise is not an issue.
it you see that silver 5 foot board to the right in the video it ia a sound proof box that does wonders but I won't need to use it. as the hosting site is a large loud warehouse we will be installing a 300k-watt solar array on the roof which will create about 40k-watts 24/7/365 in a grid tie setup.
we will have a mix of:
s9 s9i s9j
m10
l3+
and a few pieces of odd ball gear.
once we get this done we will have a 120kwatt array and a 300 kwatt array. plan is to do 1 or 2 a year in the 100 to 400 kwatt size.
divide by 6 or 7 to get your 24/7/365 number.
my deal in new spot is 50 50 coin spilt and the hoster pays power.
noise is not an issue.
it you see that silver 5 foot board to the right in the video it ia a sound proof box that does wonders but I won't need to use it. as the hosting site is a large loud warehouse we will be installing a 300k-watt solar array on the roof which will create about 40k-watts 24/7/365 in a grid tie setup.
we will have a mix of:
s9 s9i s9j
m10
l3+
and a few pieces of odd ball gear.
once we get this done we will have a 120kwatt array and a 300 kwatt array. plan is to do 1 or 2 a year in the 100 to 400 kwatt size.
divide by 6 or 7 to get your 24/7/365 number.
January 10, 2019, 08:42:28 PM
61 watt per TH thats not bad at all. I like the fans running at 3k instead of the typical 6k...
Why don't you build a wooden box with two 6" holes to put the miner inside, and use that insulating fabric to cover the inside of it, and add a bit of insulating 6" ducts to the holes? (It resembles a car muffler), something like this:
Why don't you build a wooden box with two 6" holes to put the miner inside, and use that insulating fabric to cover the inside of it, and add a bit of insulating 6" ducts to the holes? (It resembles a car muffler), something like this:
January 10, 2019, 03:50:25 PM
... Back to the M10 though no db read? If it's relatively similar to the 100% fan speed s9 it might be my first upgrade in almost a year.
I have the 31th give me an hour.
just did a video of it on low power 20.4 th about 1280 watts
Your video will be live at: https://youtu.be/efLTk8BG7i8
give it a few minutes to upload
71 db at 1 meter pitch is okay
53 db at 6 meters hard to know it is running.
yeah high speed is louder but not terrible.
video should be loaded very soon.
it is ready to view
January 10, 2019, 12:10:37 PM
Thanks for the info. Just being a curious Canadian checking how things have been collected.
Not sure you guys can help me out to much up here.
Regardless think I've made my mind up. No more distractions or I might miss out.
Not sure you guys can help me out to much up here.
Regardless think I've made my mind up. No more distractions or I might miss out.
We'll i'll bring up researching duties for again for Canadian buyers. I think we had started to but with the tariffs here in the US that hit this summer we've focused on that. Specifically trying to get sidehacks new chips exempted.
I think our Canadian buyers have double though in the last month, I know a Canadian footprint is part of our five year plan (thanks to gcnelson here) but still dependent on continued activity and interest.
Back to the M10 though no db read? If it's relatively similar to the 100% fan speed s9 it might be my first upgrade in almost a year.
January 09, 2019, 11:15:38 PM
Our rep will provide duty free shipments under the de minimus value.
Thanks for the info. Just being a curious Canadian checking how things have been collected.
Not sure you guys can help me out to much up here.
Regardless think I've made my mind up. No more distractions or I might miss out.
January 09, 2019, 10:11:57 PM
Phil do these get hit with the tarrifs in the US?
I almost pulled the trigger but I'm trying to see if I can wrangle a great deal on the something else by finding a coupon.
I almost pulled the trigger but I'm trying to see if I can wrangle a great deal on the something else by finding a coupon.
Our rep will provide duty free shipments under the de minimus value. Though till our volume increases our rate is much higher for shipping.
January 09, 2019, 08:42:23 PM
Thank you, yes I've been hovering over the buy button for a few days 
Is the 31TH model one of the units pulling 2250W?
Is the 31TH model one of the units pulling 2250W?Yes
2250/31.5 th high
1280/21.5 th low
January 09, 2019, 07:56:01 PM
Phil do these get hit with the tarrifs in the US?
I almost pulled the trigger but I'm trying to see if I can wrangle a great deal on the something else by finding a coupon.
I almost pulled the trigger but I'm trying to see if I can wrangle a great deal on the something else by finding a coupon.
January 09, 2019, 07:47:56 PM
Thank you, yes I've been hovering over the buy button for a few days Is the 31TH model one of the units pulling 2250W?
Is the 31TH model one of the units pulling 2250W? January 09, 2019, 07:40:35 PM
Phil, the 31TH you picked up is the one for $799.00 currently correct?
799-10=789+91 = 880
10 dollar discount = HAPPY2019
My four units = ten s-9 miners.
Power is 2350+2350+2250+2250 = 9400 watts for 131th
If USA based buy 1 use dhl.
January 09, 2019, 07:33:45 PM
Phil, the 31TH you picked up is the one for $799.00 currently correct?
January 09, 2019, 03:13:26 PM
Yea, any db read on these phil or fanatic?
low power is manageable s-9 at mid speed mode.
high power is loud. s-9 when it was running in loud mode.
Don't have any t15 or s15.
So far the m10 31th is good.
I had 1 m10 33th liked it order a second one
I had 2 m10 33 th like the two ordered a 31th
I now run 2 m10 33th and 1 m10 31th. I like these 3 so much I ordered a fourth m10 the 31th
So I will soon have 34+34+31.5+31.5 = 131 th with 4 machines
January 07, 2019, 03:14:41 PM
Yea, any db read on these phil or fanatic?
January 07, 2019, 12:42:08 PM
Those numbers are great for a real world application.
Done waiting around to see what Canaan puts out for an 941 type model. I've been holding off on pulling the trigger, but I might grab 1 or 2 of these bad boys. Try to get them in the house and ROI quickly.
Done waiting around to see what Canaan puts out for an 941 type model. I've been holding off on pulling the trigger, but I might grab 1 or 2 of these bad boys. Try to get them in the house and ROI quickly.
January 07, 2019, 11:59:25 AM
2250/31500 normal = 71.4 watts a th
1290/21500 low = 59 watts a th
I would like to be able to put the new firmware on my 33/34th models
as the 58-61 watts a th is very nice
1290/21500 low = 59 watts a th
I would like to be able to put the new firmware on my 33/34th models
as the 58-61 watts a th is very nice
Thanks
January 07, 2019, 11:02:53 AM
Wow, the power efficiency number for the low power mode is pretty nice.
And it is 16nm tech..!
And it is 16nm tech..!
January 07, 2019, 09:47:16 AM
Phil, unless I missed it, whats the power reading at 31/32TH?
2250/31500 normal = 71.4 watts a th
1290/21500 low = 59 watts a th
I would like to be able to put the new firmware on my 33/34th models
as the 58-61 watts a th is very nice
January 07, 2019, 07:49:35 AM
Phil, unless I missed it, whats the power reading at 31/32TH?
January 03, 2019, 11:38:22 AM
yes. here is what it mines on low power
note fans are 2700 and hash is 20.5th
it is not really loud.
I will get back with an efficiency number
watt better reads 1303 watts at 20800 or about 62.5 watts a th
based on t15 results this new 31th m10 model with low power to high power setting
may be a tiny bit better price is 799 for m10 31th model
price for t15 is 840
note fans are 2700 and hash is 20.5th
it is not really loud.
I will get back with an efficiency number
watt better reads 1303 watts at 20800 or about 62.5 watts a th
based on t15 results this new 31th m10 model with low power to high power setting
may be a tiny bit better price is 799 for m10 31th model
price for t15 is 840
Jump to: