Topic: (Review/Guide) WhatsMiner M10 33.0 Th/s, 2145W Bitcoin (SHA-256) ASIC miner - page 8. (Read 24312 times)

I think he was saying that he provided both a shipping and a billing address but, out of fear they would ship to his billing address, opened a ticket 20 minutes after placing his order to confirm they were shipping to his shipping address and not his billing address. Pangolin confirmed they would ship to the shipping address. Tracking number is provided by Pangolin upon shipment which showed the package was going to the billing address instead of the shipping address.

I've had this problem before with large and small retailers, especially when the shipping/billing are in the same state or even zip code (my billing address is only 3 miles from my shipping address and something like 5 miles from my office haha).

So you gave them an address say 123 Main Street.

You then said make the address 333 Broadway .

The first address you gave
The second address you gave.

I am asking because almost every seller won’t change addresses.
At least bitmain would not change
And Avalon would not change.

I had an issue with the shipping address with Pangolin.

I Opened a ticket 20 mins after my order to confirm what was my Billing address and shipping address.

They told me they would use the shipping address and did not. As soon as I received my tracking notice. I told them they didn't do it correctly.

Saturday(2.5-3 days after the order date): "Wait until Monday", On Monday, "can you re-confirm your shipping address ?" (Which i did) (It was already too late to changes it, all the shipping folks at my job told me so), Tuesday i got the delivery.

This is answer I had Tuesday when I told them I had to re-ship the unit myself to the correct address and it cost me like the double of the original shipping.

"Hello xxx,

DHL informed that the package has been signed for the delivery.

The delivery address can not be changed here."

I'm quite pissed off. I sent an email to Sales, Invoice and Logistic telling them this was quite an unprofessional way to go around an issue I flagged 3 days before they shipped the units and as soon as they did.

Now they gave me a compensation ticket 50$

Total lost 212$ us. (and 5 days of mining)

At least they answer to email.

I am going to the Clifton solar build out on Thurs or Fri this week.

when we are done we should be at 400-425th  btc and 6gh ltc

All the s9's will be at the 1250 watt setting
the 4 m10's top speed
the t2t 24th turbo at balanced speed
the l3+ at stock speed low volts setting
the a921 at -2
the a721's at -1

I think we will pull about 46kwatts
we need to do 56Kwatts for 4 months
we will then do the solar and drop to 40 kwatts

I most  likely need 10-12kwatts of gear

say 5 more m10's

it will be nice to have  40kwatt free and up to 90kwatts if mining takes off

Yea, hoping to get something soon. My link clicks ----> purchases are sparse now in this market. So lots put off. I'll probably be looking at cooling prep for summer or just get one efficient unit or two if I'm able. Just a tough time after holiday and car issues.

M10 is top of the list, since the db's are pretty low on LPM/efficiency setting from philipma's reads. 

Well, y'all convinced me and I have my 1st M10 on order from Pangolin. It will be nice having something other than my very healthy herd of Avalons and the few remaining s9's I have left which are slowly dying board-by-board.
 

Received my shipping details from Pangolin yesterday, should have them in hand Friday. Just gotta figure out what I'm keeping online and where over the weekend.

Anyone not buying these from Pangolin isn't doing their research. They were 125$ cheaper than whatsminer to begin with and the discount code just made it better. Not sure if there's some benefit for other countries that I don't see but it was clear cut for me.

I can't complain about electricity prices, that's what made these 2 an easy buy. I want to get them up and running and am considering a 3rd or 4th. This would essentially leave me all in on Whatsminer, decisions decisions.

We source from Pango ourselves, they always have a coupon in cart which is used unless bulk. A line to Whatsminer has been tiresome for a while.

Did I complain about my power cost in this thread either? I'll spare everyone.

Just looked at our power cost. It's $0.13 per kw/h...so even this miner is unprofitable for me, at least at current prices. I won't even be able to break even in a short enough period.

SUPERMARIO is an expired coupon

HAPPY2019     SEEMS TO BE GOOD. $20 off

799-20 = 779    plus 91 to ship net is 870 usd.

My miner came 1 day early it works and I am happy with it.

I am debating with myself on getting  1 more  for me.

this is a direct link for the miner I get 0 commission

https://pangolinminer.com/product/whatsminer-m10-instock-31t/

I buy one at a time I am happy with the gear and I am debating if I should get one more.

Just to be on the same page, https://pangolinminer.com/ this is where you have been buying?

Try the coupon code SUPERMARIO

yeah I think a cord that does not work for a usa socket comes with it.

Been too lazy to rewire them.

To OG  they are only okay due to the new solar array  deal I got into with buysolar.

I would not do these with out that deal.

OG

Don't spend the BTC then.This is assuming you just mean the coin at current value, and not funds in general. IIRC you operate a business, that is one fast way to be able to pay by wire with Pangolin. I can't say for sure but it seems they were going to try and work with me to send a wire as an individual but in the end I didn't need the special arrangement.

The review so far were enough for me to bite the bullet on these, I'm to wishy washy at times. Judging by what may or may not be a power issue with other gear I'm glad I went this route. I am getting excited, it's funny I was thinking back to my first new from manufacturer purchases in 2017, and I paid the same then for my 14.6 TH/S from the 2 741's.

Glad to hear they are close Phil, might even see it tomorrow. These haven't been shipping with a power cord have they? Was re-reading the OP and it looked as though one came in the box.

You make them sound pretty great. I’d order some but I’m hesitant to spend the BTC right now. Might need to break down and get one while the low price model is still available.

Mine has landed in New York  I will post when I get it.

If I like it I will buy more.

Yes Canada here. They are subject to 5% GST. Depending on the shipment and whether its commercial or personal there is also generally the provincial sales tax.

Apart from that as long as I stay below 2500 CAD they can expedite it through customs.

I might be 4 days with my delivery location being rural. I'm going to have to keep an eye on them as the last time they handed the package of to a courier they pretty much tossed it into my lawn, yeah it was a miner. Lol

Either way I'll have to get on wiring in a new 30 amp circuit so these 2 can hit the ground running. Just remembered I have to do a cable count, as I might need to order 1 or 2. That or take my limpy t9+ offline.

I think he is Canada and is subject to 5% but I talk to so many people in pm's I am not sure if I have him placed correctly.

It is cold in NJ today about -1C or 31f

So I cranked it up to full power it is doing 31.3 th at 2275 watts  which is 72 watts

I don't mind that it is less efficient as the place in the new solar array will let us do 50-50 on coins.

This should be a good setup for us.

A mix of new gear and old gear.

4 M10's =  130th   =   9200 watts
15 s9's =   200th   = 19125 watts
1 A921 =    20th    =   1900 watts
2 A721 =    10th    =   2100 watts
4 S7ln  =    10th    =   2400 watts
1 t2turbo = 20th    =   1600 watts

10 L3+  = 5gh       =    11200 watts

total of 47525 watts

the way New Jersey Works  we need establish   a 40kwatts 24/7/365 power draw
so we will pull 50kwatts for 4-6 months
get the solar in and drop to 40kwatts

the A721
the s7ln  do 4kwatts and will be dropped first
then we will drop s9's 5 s9s' is 6.5 kwatts

that is 10.5 so  we would be under 40   as 47.5-10.5 = 37kwatts

we will be adding m10's 1 at a time for months to come.
so the current 390 th will grow even thou we drop our watts from 47kwatt to 37kwatt

what is nice is the warehouse is so big we can provide 90kwatts 18x 30 amp 240 volt circuits

only 40kwatt would be solar but if we get a runup in coins we can fire up the old gear.

the plan is to go all m10  as 16 x 2300 = 36800 watts on high speed

and just have the old gear do nothing.  we could even go to 30 m10's at low speed  as 30 x 1280 = 38400 watts

and 30 x 21 th = 630th  all solar and if we have a runup we could do

30 x 2300 = 69kwatts
30 x 31.3 = 939 th

When I go to the new spot I will do some photos I need be careful to not expose building location etc.

DHL is always 3 days express, you'll know more obviously when tracking is sent. Watch for duties with a unit count of 2 since the package will be above de minimus value.

three days to USA once it ships.

I paid on the 9th it shipped on the 11th I think mine will show on Mon or Tues.

You ordered on the 11th  So Weds to Thurs  but I think you are Canada could be a little slower.

This will be my fourth one.

2 x 33th
2 x 31th

128-130 th in 4 machines

Well I'm pumped. I have 2 of the 31 TH models confirmed on order, I guess shipping out early next week.

I'm hoping I have these before I leave town for a bit, anyone know how long their shipping was from Pangolin to North America?

Side note while asking questions about the 2 models I was told this was the reason for the different hashrate. It was just the different chip batches they had ordered that resulted in the improvements.