Nothing at all will work with corsair 1200i
Simple
Put 3 coolermaster v1000 seasonic body
And you will have solid 3.4 th
Simple
Put 3 coolermaster v1000 seasonic body
And you will have solid 3.4 th
I have 3x coolermaster v850, 3.4T
Topic: Swedish ASIC miner company kncminer.com - page 304. (Read 3049515 times)
I have 3x coolermaster v850, 3.4T
my corsair 1200w when connect asics neptune turns off
any solution ?
any solution ?
Different PSU or two other options..
-lower the clock speeds on the advanced tab (change your pool settings if you can't do this before it shuts off.. Kurt's troubleshooting guide has the complete steps)
-buy/build a connector that will allow you to bridge two rails from the PSU to the cube.
or you can remove the elec current limit with corsair-link software.
Now that GAW have upgraded all VaultBreakers to 750mhs and are offering batch 2 VB for $6999 I wonder what kind of competitive response we will see from KNC ?
https://hashtrader.com/t/vault-breaker-update/2388
https://hashtrader.com/t/vault-breaker-update/2388
Here's something that won't help haters and trolls : Firmware 1.00 for Neptunes
5-10% speed improvement. We'll see on long term.
5-10% speed improvement. We'll see on long term.
I installed the new firmware and it's working OK so far, 10% speed improvement. My advanced tab stopped working dough :/.
my corsair 1200w when connect asics neptune turns off
any solution ?
any solution ?
I had these laying around, they came with some silverstone PSUs that I have. You can use them to merge 2 PCI-E connectors into one and avoid the shutoff issue without using the PC software (I don't have windows here). They came with AWG18 cable but since I don't plan to OC for the moment the solution keeps the nepy hashing. I must say that my hashing room it's always between 19-22 degrees Celsius.
Buy new psu corsair 1200 with Neptune is awful
They work just fine if you have the adapters, 3.4Th nepy here:
Does anyone know
If stock November Jupiter is 1 watt per gh
Or 1.3 watt per gh
At wall?
1.3 ... or more if you use the Padrino firmware. I just shut down my last Nov Jupiter 5 minutes ago.If stock November Jupiter is 1 watt per gh
Or 1.3 watt per gh
At wall?
1.3W per Gh if you are using shitty PSUs.. Pull from the wall only as good as your PSU efficiency with the load..
Does anyone know
If stock November Jupiter is 1 watt per gh
Or 1.3 watt per gh
At wall?
1.3 ... or more if you use the Padrino firmware. I just shut down my last Nov Jupiter 5 minutes ago. If stock November Jupiter is 1 watt per gh
Or 1.3 watt per gh
At wall?
Does anyone know
If stock November Jupiter is 1 watt per gh
Or 1.3 watt per gh
At wall?
If stock November Jupiter is 1 watt per gh
Or 1.3 watt per gh
At wall?
i have corsair 1200w i
is possible increase the limit 20 amp ?
how many amp neptune need?
thanks
is possible increase the limit 20 amp ?
how many amp neptune need?
thanks
Read up 2 posts if I'm quick enough.
I replied to him mistakenly I think.
YMMV
i have corsair 1200w i
is possible increase the limit 20 amp ?
how many amp neptune need?
thanks
is possible increase the limit 20 amp ?
how many amp neptune need?
thanks
Buy new psu corsair 1200 with Neptune is awful
You were asked if your PSU was an "i" series.The fastest, ZERO cost, solution may depend on that detail.
If your PSU is 1200i search this thread for that number and look thru results of last week or so.
Or
Go to the Corsair website and look for "i" series software for PC and just try it.
This might be a link to the correct SW
http://softwaredownloads.corsair.com/Files/Corsair-Link/Corsair-Link-Installer-RC-v2_6_5214.zip
I did not try it, no "i" PSU here.
There is a way to make the "i" series work that was posted recently .
YMMV
Nothing at all will work with corsair 1200i
Simple
Put 3 coolermaster v1000 seasonic body
And you will have solid 3.4 th
Simple
Put 3 coolermaster v1000 seasonic body
And you will have solid 3.4 th
Jelin kudos for your english improvments and also for your nep running @3.4TH
Nothing at all will work with corsair 1200i
Simple
Put 3 coolermaster v1000 seasonic body
And you will have solid 3.4 th
Simple
Put 3 coolermaster v1000 seasonic body
And you will have solid 3.4 th
Capacitors = magic. Can't explain that!
Therefore, PFC=PFM.
Class dismissed.
my corsair 1200w when connect asics neptune turns off
any solution ?
any solution ?
Different PSU or two other options..
-lower the clock speeds on the advanced tab (change your pool settings if you can't do this before it shuts off.. Kurt's troubleshooting guide has the complete steps)
-buy/build a connector that will allow you to bridge two rails from the PSU to the cube.
Buy new psu corsair 1200 with Neptune is awful
my corsair 1200w when connect asics neptune turns off
any solution ?
any solution ?
Is it the 'i'?
The link in my earlier post has a more articulate description of power factor than what Phoenix tried to provide:
http://power-topics.blogspot.com/2008/02/what-is-pfc-and-why-do-i-need-it.html
http://power-topics.blogspot.com/2008/02/what-is-pfc-and-why-do-i-need-it.html
That's a much better article.
Quote
Good PFC can also reduce ripple, so I agree with giving 0.001% credit where credit is due.
Capacitors = magic. Can't explain that!
my corsair 1200w when connect asics neptune turns off
any solution ?
any solution ?
That sounds like psuedo-science garbage, and isn't backed up in any way by the link you have given.
Can you provide any support for your claims?
Can you provide any support for your claims?
It's not entirely pseudo-science. He's missing some key parts of the equation and using big words to sound smart. In essence, he's regurgitating things he's read, but doesn't fully understand. Now, if he comes back here with a bunch of calculus derived from something like, oh I don't know, Maxwell's equations, then we can start to take him a little more seriously.
That part about DC connectors and heat is 99.999% dumb though.
The link in my earlier post has a more articulate description of power factor than what Phoenix tried to provide:
http://power-topics.blogspot.com/2008/02/what-is-pfc-and-why-do-i-need-it.html
Good PFC can also reduce ripple, so I agree with giving 0.001% credit where credit is due.
Here's something that won't help haters and trolls : Firmware 1.00 for Neptunes
5-10% speed improvement. We'll see on long term.
5-10% speed improvement. We'll see on long term.
Nice.. applied. The link above is for the bin, here's a link to the news release with changes:
https://www.kncminer.com/news/news-97
Thx for the links guys.
Lots of Communication errors in cgminer display
Looks like it is just more/different reported noise.
NOT detrimental to GH compared to rc6.
I'll let er soak for 12 hours and will return with avg and pool results.
I use 3.6T as perfect and compare to it BTW (for 7200 @ 500MHz)
It is the current bar AFIK
rc6 had around 2% of where did it go??? was not reported in HW errors.
HW error has increased from 0.18 to 0.8%
What I expected with stock voltages on everything.
(28nm as my expectation reference)
Treat them individually and they more productive.
CPU load is around 25% now as opposed to 100%
Positive overall experience with FW 1.0 upgrade here.
It has what we seek, a few more GH.
EDIT
If ya do heat a VRM till he goes on strike,
no need to power cycle for negotiations to return to work.
The Advanced page works great now.
Excluding the limited clocks
YMMV
Jump to: