Thread is now close due to not enough time to maintain it. You can catch up on Discord server
Chipless-Mods https://discord.gg/vcwTB6h
Topic: T17 OC/OV. S17 Series OC/OV, Antminer B7 OC/OV, S9k, Z11 + others 100% FREE (Read 10250 times)
March 09, 2020, 02:55:04 AM
February 29, 2020, 03:48:57 AM
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
What max hashrate you get from Z11e ?
I'm only been trying to overclock for a few days now. I seem to be varying between 77k to 80k. I'm hoping to get more out of it over the coming days
Thank You !
February 28, 2020, 09:03:47 PM
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
What max hashrate you get from Z11e ?
I'm only been trying to overclock for a few days now. I seem to be varying between 77k to 80k. I'm hoping to get more out of it over the coming days
February 28, 2020, 06:13:59 PM
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
What max hashrate you get from Z11e ?
February 28, 2020, 11:11:51 AM
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
February 27, 2020, 02:53:49 PM
for the z11e series, when I increase the frequency, should I also increase the mv voltage?
yes you can increase to about 910-940 with a 1800 watt psu
great, thank you
February 26, 2020, 08:29:44 PM
for the z11e series, when I increase the frequency, should I also increase the mv voltage?
yes you can increase to about 910-940 with a 1800 watt psu
February 26, 2020, 01:31:04 PM
for the z11e series, when I increase the frequency, should I also increase the mv voltage?
February 20, 2020, 05:42:55 AM
Latest update... To purchase the S17, S17+, T17 firmware you will need a minimum of 100 miners currently. If you are interested in using my mod firmware on your farm contact me with your contact details and I will have someone from the sale or deployment team contact you.
January 28, 2020, 12:39:33 PM
Updated Privately purchased. S17+ firmware will not have a public release. I will post details as I can for the process to purchase and the minimum farm size.
January 27, 2020, 12:15:20 PM
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 10 license cost is 1200 in btc or zec. This version may also become private so get yours while you can.
speeds of up to 85TH+ on as little as 3200watts
speeds of up to 85TH+ on as little as 3200watts
What about small miners (like me) which have up to 2-3 units. Why are you putting MOQ so high?
At the moment the min is 10 it may change later. The cost is where it is at because of the time frame and ROI can be recovered easily. Minimum to recover my cost for the development. send me a pm and we could discuss options
January 27, 2020, 09:40:30 AM
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 10 license cost is 1200 in btc or zec. This version may also become private so get yours while you can.
speeds of up to 85TH+ on as little as 3200watts
speeds of up to 85TH+ on as little as 3200watts
What about small miners (like me) which have up to 2-3 units. Why are you putting MOQ so high?
January 27, 2020, 02:46:01 AM
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 10 license cost is 1200 in btc or zec. This version may also become private so get yours while you can.
speeds of up to 85TH+ on as little as 3200watts
speeds of up to 85TH+ on as little as 3200watts
January 23, 2020, 01:54:33 PM
Hi Chipless,
I have a dead chain in my Bitmain z11 miner. It sees the chain but it counts 0 asics on it as I studied the kerner log when booting. The other 2 chains are fine. Any tips what to do? I tried reflashing and put back al the connections already. I used your firm version 1.8 on it but i tried the original one also.
Thanks for your great work.
Best regards Arthur
I have a dead chain in my Bitmain z11 miner. It sees the chain but it counts 0 asics on it as I studied the kerner log when booting. The other 2 chains are fine. Any tips what to do? I tried reflashing and put back al the connections already. I used your firm version 1.8 on it but i tried the original one also.
Thanks for your great work.
Best regards Arthur
Check you PSU try a different one if that dont work you may have a dead board. The board will detect but if the power circuit is damaged then the chips dont detect. They are 2 different parts of the board. Mine when a psu got weak not dead but weak it would not detect one of the boards.
January 23, 2020, 05:51:00 AM
Hi Chipless,
I have a dead chain in my Bitmain z11 miner. It sees the chain but it counts 0 asics on it as I studied the kerner log when booting. The other 2 chains are fine. Any tips what to do? I tried reflashing and put back al the connections already. I used your firm version 1.8 on it but i tried the original one also.
Thanks for your great work.
Best regards Arthur
I have a dead chain in my Bitmain z11 miner. It sees the chain but it counts 0 asics on it as I studied the kerner log when booting. The other 2 chains are fine. Any tips what to do? I tried reflashing and put back al the connections already. I used your firm version 1.8 on it but i tried the original one also.
Thanks for your great work.
Best regards Arthur
January 20, 2020, 05:20:32 PM
Antminer DR5 OC firmware now available 35.00 per miner no dev
January 15, 2020, 03:31:03 PM
hi chipless
with this setting 787m and 910v
your temperature and power consumption is how much ?
your cooling is orginal cooling z11 miner or used oil ?
air cooling is ok for this overclock ?
with this setting 787m and 910v
your temperature and power consumption is how much ?
your cooling is orginal cooling z11 miner or used oil ?
air cooling is ok for this overclock ?
temps in high 80's air cooled power 1800watts
January 15, 2020, 03:17:10 PM
hi chipless
with this setting 787m and 910v
your temperature and power consumption is how much ?
your cooling is orginal cooling z11 miner or used oil ?
air cooling is ok for this overclock ?
with this setting 787m and 910v
your temperature and power consumption is how much ?
your cooling is orginal cooling z11 miner or used oil ?
air cooling is ok for this overclock ?
January 14, 2020, 04:24:35 PM
hi i have 2 question
1: antminer t17 overclock is free ?
2: with orginal power 1800w antminer z11 i can overclock to 145ksol or not ?
what is best clock setting for 1800w power and give me how ksol ?
best regard
1: antminer t17 overclock is free ?
2: with orginal power 1800w antminer z11 i can overclock to 145ksol or not ?
what is best clock setting for 1800w power and give me how ksol ?
best regard
T17 is 100 dollars per miner. You get 70-85th depending on your choices. There is no dev fee it is licensed per miner
My Z11 i run here at 787m and 910v and get 156-158k using a APW7 PSU
Do you have Z9Mini? ...
If so, what parameters are used to get the best results?
#crysx
I sold all my minis so no I do not have any stats on them.
January 14, 2020, 06:05:09 AM
hi i have 2 question
1: antminer t17 overclock is free ?
2: with orginal power 1800w antminer z11 i can overclock to 145ksol or not ?
what is best clock setting for 1800w power and give me how ksol ?
best regard
1: antminer t17 overclock is free ?
2: with orginal power 1800w antminer z11 i can overclock to 145ksol or not ?
what is best clock setting for 1800w power and give me how ksol ?
best regard
T17 is 100 dollars per miner. You get 70-85th depending on your choices. There is no dev fee it is licensed per miner
My Z11 i run here at 787m and 910v and get 156-158k using a APW7 PSU
Do you have Z9Mini? ...
If so, what parameters are used to get the best results?
#crysx
Jump to: