Topic: T17 OC/OV. S17 Series OC/OV, Antminer B7 OC/OV, S9k, Z11 + others 100% FREE - page 5. (Read 10235 times)
September 25, 2019, 08:26:37 PM
Latest B7
September 25, 2019, 10:48:59 AM
I use the 1.8.r because it seems that I get more speed at the same settings as the 2.4 and I dont use Nicehash
September 25, 2019, 03:08:17 AM
Sounds like a pool issue or network error. I get some odd stuff in log if I lose the inet connection for more then 2 minutes. What pool are you on?
I am using Slushpool and it is working on other Z11 flawlessly. However, on this machine with your firmware, it is causing this problem that I noted above usually after a few hours of normal work.
What version of my fw are you using the 2.4 or the 1.8.r? I use the 1.8.r version it gets better rates but takes a little longer to reach speed. The 1.8.r dont work on Nicehash though. I havent had any problems reported like you describe. So knowing the version can help me pinpoint the problem.
Here are links to the 2 versions
Download Link for 2.4 Private Free for Z11, Z11j and Z11e, Nicehash Supported full Fan Control
https://drive.google.com/file/d/1DRm0ZPsKuDJ7NQB-3LEgLUd591QLcvpv/view?usp=sharing
Download Link for 1.8.r Private free for Z11 Series Miners NO Nicehash Support, Full Fan Control
https://drive.google.com/file/d/1tQDcH2ai5EdDJ1AyWmorifWz6get_f66/view?usp=sharing
I am currently on phone so sorry for quoting everything.
I am using 2.4, may I know the reason why you are using older version?
September 25, 2019, 01:25:38 AM
Antminer B7 Full Frequency and Voltage Control is available
The Antminer B7 mods are complete and is available for purchase. There may be a free limited version. I have not decided yet.
The Pro version is available for purchase which will open the full speeds of your B7.
The cost varies depending on the number of units you have. Starting at US $30 for 1-2 miners in a Coin we agree on when you pm for payment info. No PayPal. Digital Currency Only
It features full voltage and frequency control.
Gained hash is from -100% to over +70% depending on the settings you choose. 693watts should give you around 150k +/- I have seen it peak over 600k and have ran it as high as 182k on a 24hr average
Fixed miner status page. Now it shows the ASIC Status, Added the ability to create backup of the config files, Removed Signature Checking.
Comes complete with all the files and installs all files needed to use custom firmware on your Antminer B7.
The Antminer B7 mods are complete and is available for purchase. There may be a free limited version. I have not decided yet.
The Pro version is available for purchase which will open the full speeds of your B7.
The cost varies depending on the number of units you have. Starting at US $30 for 1-2 miners in a Coin we agree on when you pm for payment info. No PayPal. Digital Currency Only
It features full voltage and frequency control.
Gained hash is from -100% to over +70% depending on the settings you choose. 693watts should give you around 150k +/- I have seen it peak over 600k and have ran it as high as 182k on a 24hr average
Fixed miner status page. Now it shows the ASIC Status, Added the ability to create backup of the config files, Removed Signature Checking.
Comes complete with all the files and installs all files needed to use custom firmware on your Antminer B7.
September 24, 2019, 08:24:30 PM
Sounds like a pool issue or network error. I get some odd stuff in log if I lose the inet connection for more then 2 minutes. What pool are you on?
I am using Slushpool and it is working on other Z11 flawlessly. However, on this machine with your firmware, it is causing this problem that I noted above usually after a few hours of normal work.
What version of my fw are you using the 2.4 or the 1.8.r? I use the 1.8.r version it gets better rates but takes a little longer to reach speed. The 1.8.r dont work on Nicehash though. I havent had any problems reported like you describe. So knowing the version can help me pinpoint the problem.
Here are links to the 2 versions
Download Link for 2.4 Private Free for Z11, Z11j and Z11e, Nicehash Supported full Fan Control
https://drive.google.com/file/d/1DRm0ZPsKuDJ7NQB-3LEgLUd591QLcvpv/view?usp=sharing
Download Link for 1.8.r Private free for Z11 Series Miners NO Nicehash Support, Full Fan Control
https://drive.google.com/file/d/1tQDcH2ai5EdDJ1AyWmorifWz6get_f66/view?usp=sharing
September 24, 2019, 01:27:34 PM
Sounds like a pool issue or network error. I get some odd stuff in log if I lose the inet connection for more then 2 minutes. What pool are you on?
I am using Slushpool and it is working on other Z11 flawlessly. However, on this machine with your firmware, it is causing this problem that I noted above usually after a few hours of normal work.
September 24, 2019, 12:48:17 PM
I have a problem. I've been using your firmware for almost 7 days now and I had to reboot the unit at least 3 times. I would get a notification from pull that the miner stopped working, when I went to check, miner was mining fine and all pools were "Alive".
Went to Kernel Log and only found the line "pool 0 extranonce set to 2f336502000c043a" and that line would repeat for hours where only the numbers and letters were different. What is up with that?
Went to Kernel Log and only found the line "pool 0 extranonce set to 2f336502000c043a" and that line would repeat for hours where only the numbers and letters were different. What is up with that?
Sounds like a pool issue or network error. I get some odd stuff in log if I lose the inet connection for more then 2 minutes. What pool are you on?
September 24, 2019, 02:10:05 AM
I have a problem. I've been using your firmware for almost 7 days now and I had to reboot the unit at least 3 times. I would get a notification from pull that the miner stopped working, when I went to check, miner was mining fine and all pools were "Alive".
Went to Kernel Log and only found the line "pool 0 extranonce set to 2f336502000c043a" and that line would repeat for hours where only the numbers and letters were different. What is up with that?
Went to Kernel Log and only found the line "pool 0 extranonce set to 2f336502000c043a" and that line would repeat for hours where only the numbers and letters were different. What is up with that?
September 21, 2019, 09:41:28 PM
Thank you for the discord link. I thought at least someone would have already made such a list of results... At least some base line. I know that they can and DO vary from miner to miner, but still some results would be helpful. I might(if I find some free time) make such list with 2 of my Z11 so others can compare.
I run mine higher at 793m and 970mv it runs 157-159k @ right about 1900-2000 watts. Most are running them at 940mv or less on the voltage
September 21, 2019, 09:30:42 PM
Thank you for the discord link. I thought at least someone would have already made such a list of results... At least some base line. I know that they can and DO vary from miner to miner, but still some results would be helpful. I might(if I find some free time) make such list with 2 of my Z11 so others can compare.
September 21, 2019, 01:51:55 PM
Hi Chipless, is there any place where I can find certain frequencies matched with best voltage for best ksol/s gain?
Also, your discord invite in signature is invalid, could you please provide a new one?
Also, your discord invite in signature is invalid, could you please provide a new one?
I dont know of any places to where there are results with freq and voltage matches. That can vary from miner to miner.
here is the new discord link
https://discord.gg/2DXzvE
September 21, 2019, 10:13:12 AM
Hi Chipless, is there any place where I can find certain frequencies matched with best voltage for best ksol/s gain?
Also, your discord invite in signature is invalid, could you please provide a new one?
Also, your discord invite in signature is invalid, could you please provide a new one?
September 15, 2019, 08:34:12 PM
Here is the first release of the Chipless Inno A9 web gui add-on. It allows changing of the cgminer config file with out editing manually. It does nothing more with out a modded cgminer which is available for purchase in my A9 Pro version. You need SSh to install and directions are included. The zip password is 1234
Easy Install upload 2 files and run the runme.... Thats it!!!
https://drive.google.com/file/d/1jN50xnTLMOPPg6zkkX-rNFfGu0A2EtdD/view?usp=sharing
Easy Install upload 2 files and run the runme.... Thats it!!!
https://drive.google.com/file/d/1jN50xnTLMOPPg6zkkX-rNFfGu0A2EtdD/view?usp=sharing
September 06, 2019, 02:09:03 PM
Changing SPI does impact hashing path and is just a waste.
You do know what SPI is, right? And it, like I2C and RS232 both have different frequencies (“baud” in RS232). Those are just for communications between components and not hashing.... might as well overclock the LEDs to blink faster while you are in there.
You change the weirdest crap.
Also, “disparate”, not “desperate”... unless your voltage package options really are hard up, but I would assume you meant “unique”.
-j
You do know what SPI is, right? And it, like I2C and RS232 both have different frequencies (“baud” in RS232). Those are just for communications between components and not hashing.... might as well overclock the LEDs to blink faster while you are in there.
You change the weirdest crap.
Also, “disparate”, not “desperate”... unless your voltage package options really are hard up, but I would assume you meant “unique”.
-j
Yes I know what all the settings are doing. We have been testing the firmware for over a month now. I meant to type separate. Go worry about updating your own firmware, go add the features you told people you would and quit acting like no one else can make improvements.
You can talk down all you want on the A9 and z11 stuff like you do with every other fw. It will offers more options to users compared to the factory fw currently.
edit... the funny thing is you are commenting when you dont even know what we have done to the firmware. Unless someone has given you a copy you do not know everything we have going on with it.
September 06, 2019, 10:29:46 AM
Changing SPI does impact hashing path and is just a waste.
You do know what SPI is, right? And it, like I2C and RS232 both have different frequencies (“baud” in RS232). Those are just for communications between components and not hashing.... might as well overclock the LEDs to blink faster while you are in there.
You change the weirdest crap.
Also, “disparate”, not “desperate”... unless your voltage package options really are hard up, but I would assume you meant “unique”.
-j
You do know what SPI is, right? And it, like I2C and RS232 both have different frequencies (“baud” in RS232). Those are just for communications between components and not hashing.... might as well overclock the LEDs to blink faster while you are in there.
You change the weirdest crap.
Also, “disparate”, not “desperate”... unless your voltage package options really are hard up, but I would assume you meant “unique”.
-j
September 06, 2019, 02:47:54 AM
Why would anyone want to run an A9 at 1000watts for only 66-68 k/sols???
I have all mine running 58-63 k/sols and they are only pulling 750watts from the wall.
At 8 cents a kilowatt I'm making 2 cents a day more because of the lower power consumption.
And on top of that you want to charge for making the machine less efficient...
Hard pass!
I have all mine running 58-63 k/sols and they are only pulling 750watts from the wall.
At 8 cents a kilowatt I'm making 2 cents a day more because of the lower power consumption.
And on top of that you want to charge for making the machine less efficient...
Hard pass!
Right now it would vary by machine. I have 2 separate voltage/frequency packages until I have the web gui and a installer finished which wont be till early next week before I have time to finish it.
You will be able to under or over power the unit and select any freq max limit you want to try not just up to 1596m
Without the cgminer mod with it you are limited to 1596m and whatever voltage allowing to tune for more speed. Any miner when over clocked uses more power so you would need to find the range that is most profitable for you.
edit....
What many dont realize is the settings they set in the config file right now only the first t1pll is read by the cgminer and ignores chain 2 and 3 settings. There are additional setings that can be used to tune the miner such as the performance level spi speed ability to set a higher frequency or lower, ability to set voltage higher or lower with my modded cgminer.
September 06, 2019, 01:38:11 AM
Why would anyone want to run an A9 at 1000watts for only 66-68 k/sols???
I have all mine running 58-63 k/sols and they are only pulling 750watts from the wall.
At 8 cents a kilowatt I'm making 2 cents a day more because of the lower power consumption.
And on top of that you want to charge for making the machine less efficient...
Hard pass!
I have all mine running 58-63 k/sols and they are only pulling 750watts from the wall.
At 8 cents a kilowatt I'm making 2 cents a day more because of the lower power consumption.
And on top of that you want to charge for making the machine less efficient...
Hard pass!
September 05, 2019, 08:11:54 PM
A9 Update.....Coming soon update all vid and freq settings using web gui add-on. You will also be able to set your freq limit beyond the locked 1596m currently in place. I am also working on a easy install package that can be ran under ssh to install what is needed.
September 02, 2019, 02:50:49 AM
Yes i reported....its kidding sh#t..only trolling....
Hope we can Talk now about interesting things...
Hope we can Talk now about interesting things...
That was my intention was to get something more going on the A9 since no one else wanted to touch it any further then the config file mod.
September 02, 2019, 02:07:36 AM
Yes i reported....its kidding sh#t..only trolling....
Hope we can Talk now about interesting things...
Hope we can Talk now about interesting things...
Jump to: