T17 OC/OV. S17 Series OC/OV, Antminer B7 OC/OV, S9k, Z11 + others 100% FREE - page 2.

chipless

jr. member

Activity: 559

Merit: 4

Quote from: tps_star on January 13, 2020, 05:13:02 PM

hi i have 2 question
1: antminer t17 overclock is free ?
2: with orginal power 1800w antminer z11 i can overclock to 145ksol or not ?
what is best clock setting for 1800w power and give me how ksol ?
best regard

T17 is 100 dollars per miner. You get 70-85th depending on your choices. There is no dev fee it is licensed per miner

My Z11 i run here at 787m and 910v and get 156-158k using a APW7 PSU

tps_star

newbie

Activity: 15

Merit: 0

hi i have 2 question
1: antminer t17 overclock is free ?
2: with orginal power 1800w antminer z11 i can overclock to 145ksol or not ?
what is best clock setting for 1800w power and give me how ksol ?
best regard

chipless

jr. member

Activity: 559

Merit: 4

Quote from: yrk1957 on January 12, 2020, 02:21:03 PM

Feedback on the T17 firmware.

I have one running stable at 51T (850@19v) with chipless's firmware.

For comparison, I could not get it to run beyond 44T with vnish firmware. And on top that has 3% fee.

So excellent work!

Good tune is 925m and 1870v should get you 54-55TH @ 3100-3200 watts

Thank You

yrk1957

member

Activity: 529

Merit: 29

Feedback on the T17 firmware.

I have one running stable at 51T (850@19v) with chipless's firmware.

For comparison, I could not get it to run beyond 44T with vnish firmware. And on top that has 3% fee.

So excellent work!

chipless

jr. member

Activity: 559

Merit: 4

Version 2.0 is now available ...........

S9k/SE Combo firmware is available. Now supports either model full auto-tune, per chip, per chain, voltage control

chipless

jr. member

Activity: 559

Merit: 4

The Chipless S9 Se custom firmware is Now Available.........

The Chipless Antminer S9 SE Custom OC and Voltage Firmware is now Available starting at 35.00 per miner or qty discounts. Offers full Auto-Tune with freq and voltage Settings available in 3 modes. Global settings, Per Chain settings and Per Chain Per Chip settings. With 2 voltage choices for the freq options, Global or per chain.

Discord.... https://discord.gg/8cgtBcE

chrysophylax

legendary

Activity: 2828

Merit: 1091

--- ChainWorks Industries ---

Quote from: efudd on November 25, 2019, 03:25:58 PM

Quote from: whitefire990 on November 23, 2019, 12:15:20 PM

I just started using the Z11 2.3 Fuddware on 4 x Z11.
This is the first time I have used any Fuddware.
The firmware works great for around 10 hours. Then, the machines stay working (as shown in control panel), but LSTime (last share time) keeps increasing as no new shares are submitted to the pool. This never ends; hours and hours will pass. Poolside hash rate drops to zero.
A reboot fixes everything. But very annoying to reboot every 10 hours.
Any idea what the problem is?
Happened on Luxor and Suprnova, the only 2 pools I tried. Same deal.
Obviously dev fee kicks in once in a while but not for hours and hours.

Luxor had issues this past weekend that may be what you saw. I can't speak to Suprnova.

This is not my thread, so send me a PM with your supportID.

-j

OCMiner ...

He owns and operates/maintains SuprNova in case you didn't know mate. From my experience with him, a good bloke too

I believe many ASIC and GPU miners work on his systems, including all the firmware present for these Zxx Series ASIC also.

#crysx

chipless

jr. member

Activity: 559

Merit: 4

I now offer eepprom repair for corrupt hash board freq and voltage table caused by faulty firmware. Or if you dont want a full mod or just a boots i can give it to you. The service requires SSH access to the miner. Contact for details.

Kalyst69

jr. member

Activity: 147

Merit: 1

Better to join the official discord channel. Chipless will answer you faster
https://discord.gg/wrMVQ2s

chipless

jr. member

Activity: 559

Merit: 4

Quote from: QSZ on January 02, 2020, 08:59:57 AM

How to buy B7 overclocking firmware and how to use it? Can the latest version of Bitmain B7 firmware be overclocked?

PM sent to you

QSZ

newbie

Activity: 2

Merit: 0

How to buy B7 overclocking firmware and how to use it? Can the latest version of Bitmain B7 firmware be overclocked?

QSZ

newbie

Activity: 2

Merit: 0

How to buy B7 overclocking firmware and how to use it?

chipless

jr. member

Activity: 559

Merit: 4

T17 firmware update now available. Now offers per chain and per chip tuning as well as its original features

chipless

jr. member

Activity: 559

Merit: 4

Most S and T 17 models i can get into without SD if they do not have the newest firmware on them.

algcool

jr. member

Activity: 82

Merit: 1

Cooldragon

Quote from: chipless on December 24, 2019, 10:16:00 PM

Quote from: algcool on December 24, 2019, 09:10:08 PM

Quote from: chipless on December 20, 2019, 10:43:25 PM

Quote from: algcool on December 20, 2019, 10:38:01 PM

Quote from: chipless on December 17, 2019, 08:25:18 PM

Quote from: baladio16000 on December 17, 2019, 08:19:19 PM

I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.

you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui

Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job.

you can use a script to unlock all the miners at the same time then load new firmware to all of them

I am really like to use the script to unlock the miners, do you know how to make it?

As far as I know there is no exploit available on the Z11 to unlock it without using Sd

Thanks a lot! Sir, is it the same situation as the miners T17, S17?

chipless

jr. member

Activity: 559

Merit: 4

Quote from: bbenites on December 25, 2019, 06:55:20 AM

Quote from: chipless on December 24, 2019, 04:52:47 PM

Quote from: bbenites on December 24, 2019, 10:20:52 AM

I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems

Are you using efudd firmware or chipless firmware. I have 2.4 released. efudd is fw is 2.3. If you get issues on luxor that you will have to contact them about

im using Efudd 2.3 do you have 2.4 how I can get a license ? so I do not have to mine in Luxor

You need to contact efudd i dont support his firmware .... I have my own 2.4 version that can be found on the main page of this thread. It is free no license needed and no dev fee

bbenites

newbie

Activity: 3

Merit: 0

Quote from: chipless on December 24, 2019, 04:52:47 PM

Quote from: bbenites on December 24, 2019, 10:20:52 AM

I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems

Are you using efudd firmware or chipless firmware. I have 2.4 released. efudd is fw is 2.3. If you get issues on luxor that you will have to contact them about

im using Efudd 2.3 do you have 2.4 how I can get a license ? so I do not have to mine in Luxor

chipless

jr. member

Activity: 559

Merit: 4

Quote from: algcool on December 24, 2019, 09:10:08 PM

Quote from: chipless on December 20, 2019, 10:43:25 PM

Quote from: algcool on December 20, 2019, 10:38:01 PM

Quote from: chipless on December 17, 2019, 08:25:18 PM

Quote from: baladio16000 on December 17, 2019, 08:19:19 PM

I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.

you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui

Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job.

you can use a script to unlock all the miners at the same time then load new firmware to all of them

I am really like to use the script to unlock the miners, do you know how to make it?

As far as I know there is no exploit available on the Z11 to unlock it without using Sd

algcool

jr. member

Activity: 82

Merit: 1

Cooldragon

Quote from: chipless on December 20, 2019, 10:43:25 PM

Quote from: algcool on December 20, 2019, 10:38:01 PM

Quote from: chipless on December 17, 2019, 08:25:18 PM

Quote from: baladio16000 on December 17, 2019, 08:19:19 PM

I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.

you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui

Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job.

you can use a script to unlock all the miners at the same time then load new firmware to all of them

I am really like to use the script to unlock the miners, do you know how to make it?

chipless

jr. member

Activity: 559

Merit: 4

Quote from: bbenites on December 24, 2019, 10:20:52 AM

I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems

Are you using efudd firmware or chipless firmware. I have 2.4 released. efudd is fw is 2.3. If you get issues on luxor that you will have to contact them about

Topic: T17 OC/OV. S17 Series OC/OV, Antminer B7 OC/OV, S9k, Z11 + others 100% FREE - page 2. (Read 10178 times)