I've written a brief article that describes how to get up and mining with the USB Erupter under OS X using either bfgminer or cgminer. Hope it helps!
Incredible Work!
Much thanks OP updated...
Topic: USB ASIC ERUPTER - Setup & Config. BCG Miner, cgminer & Hubs "Oh Pi"! - page 8. (Read 156922 times)
July 01, 2013, 11:14:20 PM
Incredible Work!
Much thanks OP updated...
July 01, 2013, 10:36:40 PM
I've written a brief article that describes how to get up and mining with the USB Erupter under OS X using either bfgminer or cgminer. Hope it helps!
June 30, 2013, 05:45:06 PM
I just looked at pics from the OP. I guess I just answered my own question.
June 30, 2013, 05:37:35 PM
Is there any reason to believe that the corresponding power supply for the d-link DUB-H7 isn't adequate to supply full power for 7 connected erupters? All ports are powered, of course, but can the power supply support that much simultaneous electrical draw?
June 30, 2013, 04:51:15 PM
Are all 7 of the Dlink ports in Alexrossi's diagram powered?
Sam
Of course they are Sam
June 30, 2013, 02:46:18 PM
A Star topology offers a more direct route so that would be my first choice pending testing.
I'm using 7 port Rosewill hubs which have 5 Powered ports and 2 unpowered which, I believe, have their own separate controller for the purpose of daisy chaining, or so I thought.
Are all 7 of the Dlink ports in Alexrossi's diagram powered?
Sam
June 30, 2013, 01:10:32 PM
A Star topology offers a more direct route so that would be my first choice pending testing. Why not spend a little extra for two Pi units for less chance on a single failure causing problems? (both the primary usb hub and the pi)
June 30, 2013, 12:59:57 PM
Is possibly a thing like this? Thanks in advance for all the replies 
Well your diagram poses a new question with me.
Is it better to configure the USB Hubs in a Star Topology as you are doing or to Daisy Chain them in a type of Bus Topology?
I am connecting mine in a Bus Topology and never really put much thought into doing a Star.
Sam
June 30, 2013, 03:00:15 AM
Is possibly a thing like this? Thanks in advance for all the replies
[…]
[…]
49 Erupters … theoretically, yes should work as the bus should max out @ 127 devices.
Need an example of someone using that many devices on a single RPi before we know for sure.
June 30, 2013, 02:30:50 AM
Is possibly a thing like this? Thanks in advance for all the replies
June 26, 2013, 04:10:18 PM
ok i understand thanks
June 26, 2013, 04:07:31 PM
Hum.....only namecoins other than bitcoins? 
The Block Erupters can only mine cryptocurrencies that use the SHA256 hashing algorithm.
Add’l details on cryptocurrencies here:
https://en.bitcoin.it/wiki/List_of_alternative_cryptocurrencies
June 26, 2013, 04:01:16 PM
Hum.....only namecoins other than bitcoins?
June 26, 2013, 03:57:21 PM
Well of course it won't work.
ASIC stands for Application-Specific Integrated Circuit -- it's hard wired to do only one thing: mine bitcoins.
It can't do other cryptocurrencies (except namecoins which use the same result at Bitminter).
ASIC stands for Application-Specific Integrated Circuit -- it's hard wired to do only one thing: mine bitcoins.
It can't do other cryptocurrencies (except namecoins which use the same result at Bitminter).
June 26, 2013, 03:53:51 PM
it's a pool of a new cryptocurrency.
The USB isn't working with this kind of pool?
The USB isn't working with this kind of pool?
June 26, 2013, 03:45:10 PM
"Network diff set to 1" 
June 26, 2013, 02:53:58 PM
Hi Guys,
i've some problems with my new Usb Erupter.
I've never get an ACCEPT. I Always get FOUN BLOCK FOR POOL or REJECTED
And the Mining pools indicates that my hasrate is always 0.
I run on Windows 7 with guiminer.
My connection string is :
cgminer-nogpu -u Sampey.1 -p XXXXX -o http://www.bottlecapspool.com:12353 --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM5
Please help me
i've some problems with my new Usb Erupter.
I've never get an ACCEPT. I Always get FOUN BLOCK FOR POOL or REJECTED
And the Mining pools indicates that my hasrate is always 0.
I run on Windows 7 with guiminer.
My connection string is :
cgminer-nogpu -u Sampey.1 -p XXXXX -o http://www.bottlecapspool.com:12353 --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM5
Please help me
June 26, 2013, 08:10:57 AM
can two hubs function with the Rasberry pi, since it has two usb ports.
for instance 2 x 10port usb 2.0 hubs or is there a limit to how many usb block erupters one pi can handle?
for instance 2 x 10port usb 2.0 hubs or is there a limit to how many usb block erupters one pi can handle?
You should be able to daisy chain one hub off of another too.
June 26, 2013, 03:05:39 AM
can two hubs function with the Rasberry pi, since it has two usb ports.
for instance 2 x 10port usb 2.0 hubs or is there a limit to how many usb block erupters one pi can handle?
for instance 2 x 10port usb 2.0 hubs or is there a limit to how many usb block erupters one pi can handle?
June 23, 2013, 05:53:39 PM
RPi sandwiched between a USB hub and LCD shield. It's doing a lot better than my Pi which can get about 0.47khash on litecoin...
FYI - just started a thread for that project here:
https://bitcointalksearch.org/topic/piminer-diy-mining-controllermonitor-with-raspberry-pi-v11-241504
Jump to: