I am getting an error with Win32 client, it says zlib1.dll is missing. 
http://www.zlib.net/ There is reference to this zlib library on page 6 of this thread, too..
Topic: [XPM] Working on a GPU miner for Primecoin, new thread :) (Read 166600 times)
http://www.zlib.net/ There is reference to this zlib library on page 6 of this thread, too..
I am getting an error with Win32 client, it says zlib1.dll is missing.
I know this thread is old, but if anyone is still trying to get past the error:
"./reaper: error while loading shared libraries: libblkmaker-0.1.so.0: cannot open shared object file: No such file or directory"
After finalizing with "sudo make install" on libblkmaker library, run the "ldconfig" command as root while still in the directory.
That should fix it.
How does it stand up against other XPM gpu miners?"./reaper: error while loading shared libraries: libblkmaker-0.1.so.0: cannot open shared object file: No such file or directory"
After finalizing with "sudo make install" on libblkmaker library, run the "ldconfig" command as root while still in the directory.
That should fix it.
I actually only started playing around with this one yesterday. I haven't tried any of the others, yet.
Just going to let it run for a few days. Depending on how that goes, I might start checking out the others.
I know this thread is old, but if anyone is still trying to get past the error:
"./reaper: error while loading shared libraries: libblkmaker-0.1.so.0: cannot open shared object file: No such file or directory"
After finalizing with "sudo make install" on libblkmaker library, run the "ldconfig" command as root while still in the directory.
That should fix it.
How does it stand up against other XPM gpu miners? "./reaper: error while loading shared libraries: libblkmaker-0.1.so.0: cannot open shared object file: No such file or directory"
After finalizing with "sudo make install" on libblkmaker library, run the "ldconfig" command as root while still in the directory.
That should fix it.
I know this thread is old, but if anyone is still trying to get past the error:
"./reaper: error while loading shared libraries: libblkmaker-0.1.so.0: cannot open shared object file: No such file or directory"
After finalizing with "sudo make install" on libblkmaker library, run the "ldconfig" command as root while still in the directory.
That should fix it.
"./reaper: error while loading shared libraries: libblkmaker-0.1.so.0: cannot open shared object file: No such file or directory"
After finalizing with "sudo make install" on libblkmaker library, run the "ldconfig" command as root while still in the directory.
That should fix it.
Wanna see the food I bought with them? xD
Just a coincidence...or was it on purpose? 
I know, I was surprised too after this flop. (cough mtrlt's miner)
I know, I was surprised too after this flop. (cough mtrlt's miner)
If this is true, I'll eat my hat.
On video.
Just kidding. xD
Just a coincidence...or was it on purpose?
I know, I was surprised too after this flop. (cough mtrlt's miner)
I know, I was surprised too after this flop. (cough mtrlt's miner)
A Primecoin GPU miner is being tested with reports of good results, ~25x efficiency.
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
3-6 months before an open-source optimized GPU miner is abound. For now it will be a nice slow uptrend in difficulty.
Believe whatever you want...I'm using it and I found two blocks in 3 days with 2 280x cards.
A Primecoin GPU miner is being tested with reports of good results, ~25x efficiency.
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
3-6 months before an open-source optimized GPU miner is abound. For now it will be a nice slow uptrend in difficulty.
Believe whatever you want...I'm using it and I found two blocks in 3 days with 2 280x cards.
A Primecoin GPU miner is being tested with reports of good results, ~25x efficiency.
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
3-6 months before an open-source optimized GPU miner is abound. For now it will be a nice slow uptrend in difficulty.
A Primecoin GPU miner is being tested with reports of good results, ~25x efficiency.
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
3-6 months before an open-source optimized GPU miner is abound. For now it will be a nice slow uptrend in difficulty.
A Primecoin GPU miner is being tested with reports of good results, ~25x efficiency.
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
https://bitcointalksearch.org/topic/primecoin-gpu-miner-91-cpd-on-a-280x-pool-2-devfee-548230
I think if Max got his Gpu miner, XPM deserves one too... Nothing is impossible. XPM is one of most original and unique coins out there.
It took about 12 hours for cbuchner1 to crack Max and publish a GPU miner. Wasn't very difficult.
so... did this still not happen?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
It takes a LOT of effort and smarts. Much more than Mtmlr is capable of and much more than anyone here in the forums is willing to put in - XPM is a virtually worthless botnet coin.
Can't forget the sour grapes?
Keccak is a different animal altogether...prime number math (integers) doesn't paralellize well, and gpu's strenght is massive paralell computing capabilities, so, yeah.
I think if Max got his Gpu miner, XPM deserves one too... Nothing is impossible. XPM is one of most original and unique coins out there.
It took about 12 hours for cbuchner1 to crack Max and publish a GPU miner. Wasn't very difficult.
so... did this still not happen?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
It takes a LOT of effort and smarts. Much more than Mtmlr is capable of and much more than anyone here in the forums is willing to put in - XPM is a virtually worthless botnet coin.
Can't forget the sour grapes?
so... did this still not happen?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
It takes a LOT of effort and smarts. Much more than Mtmlr is capable of and much more than anyone here in the forums is willing to put in - XPM is a virtually worthless botnet coin.
I think if Max got his Gpu miner, XPM deserves one too... Nothing is impossible. XPM is one of most original and unique coins out there.
so... did this still not happen?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
How is it impossible? The entire crypto community cannot get a GPU miner working for primecoin?
I think that only one person has actually had success compiling this, on BSD or something.
^^ this
Code:
mkdir: cannot create directory 'build': File exists
asking for OpenCL = /usr/lib64/libOpenCL.so
-- Configuring done
-- Generating done
-- Build files have been written to: /home/de/small/temp_small/cryptos/Reaper_prime/build
[ 6%] Building CXX object CMakeFiles/reaper.dir/App.cpp.o
/home/de/small/temp_small/cryptos/Reaper_prime/App.cpp: In function 'void SubmitShare(Curl&, Share&)':
/home/de/small/temp_small/cryptos/Reaper_prime/App.cpp:101:112: error: too many arguments to function 'json_t* blkmk_submit_jansson(blktemplate_t*, const unsigned char*, unsigned int, blknonce_t)'
json_t* readyblock = blkmk_submit_jansson(tmpl, &w.data[0], w.dataid, NONCE, &w.auxdata[0], w.auxdata.size());
^
In file included from /home/de/small/temp_small/cryptos/Reaper_prime/App.h:12:0,
from /home/de/small/temp_small/cryptos/Reaper_prime/Global.h:96,
from /home/de/small/temp_small/cryptos/Reaper_prime/App.cpp:1:
/usr/include/libblkmaker-0.1/blkmaker_jansson.h:10:16: note: declared here
extern json_t *blkmk_submit_jansson(blktemplate_t *, const unsigned char *data, unsigned int dataid, blknonce_t);
^
make[2]: *** [CMakeFiles/reaper.dir/App.cpp.o] Error 1
make[1]: *** [CMakeFiles/reaper.dir/all] Error 2
make: *** [all] Error 2
Jump to: