I think you should increase your check time to at least 4 seconds. My rig randomly shows offline on the site but it never is actually offline, and with the changes I've made there's no more drops pinging the internet, so I'm not sure what's going on, but it's not on my end anymore. I'm sure it takes longer than 2 seconds to run through a ping check of 100+ machines from your side.
Also, I'm confused on the displayed price that shows in the rig list. My best price listed is .0198, but I put in .022 on the admin page, and it's .02146 after your cut, so is that .0198 actually correct?
Topic: [ANN] LEASERIG.NET - rent&hire Quark hashing power! - page 44. (Read 106977 times)
Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?
How to prevent that?
Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.How to prevent that?
I have it done like this:
cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777
Is this okay? Cause the save group is added
Ahhh okay. So it should work when I put it directly in my config file?
Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?
How to prevent that?
Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.How to prevent that?
I have it done like this:
cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777
Is this okay? Cause the save group is added
Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?
How to prevent that?
Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.How to prevent that?
I have it done like this:
cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777
Is this okay? Cause the save group is added
Dont know if it matters but try:
--api-groups "P:switchpool:addpool:removepool:restart:save:*"
i dont think it likes multiple things in your command line, or just add it in your conf file.
Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?
How to prevent that?
Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.How to prevent that?
I have it done like this:
cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777
Is this okay? Cause the save group is added
cgminer has 5min delay for switch - testing stability. This is another issue 
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
It's a fork of CGMiner 3.8.5
I can give you 40 GH/s on BFGMiner if you want to test it out.
I've set it up on BFGMiner, api group and your ip. I'm ready to go just for you to try it out ;p.
Send me PM with your trust URL and name of the rig. I have it read, lets try out
First SHA256 leasing rig cgminer has 5min delay for switch - testing stability. This is another issue
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
It's a fork of CGMiner 3.8.5
I can give you 40 GH/s on BFGMiner if you want to test it out.
I've set it up on BFGMiner, api group and your ip. I'm ready to go just for you to try it out ;p.
Today's run on middlecoin seems like it will be about .0208 BTC/MH/day those who are advertising their rigs for less than that are just loosing money...
yes guys you will be losing money (few microBTC) for 1 day please raise your price immideately
Yes i was inferring this
.. anyways no loss for me Ill just keep my rig prices slightly above middlecoin earnings and if nobody rents mine because of low-ballers then my rigs will hash away on middlecoin.+1 exactly. This was what I wrote on middle coin pool thread for which I was bashed lol
Simple Test
"If you think you can earn more on middlecoin then leasing your rig, then lease a rig and mine at middlecoin" -- Zombie123
Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?
How to prevent that?
Add 'save' command to group assigned to leaserig via API. See first message of this thread for details. How to prevent that?
Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?
How to prevent that?
How to prevent that?
Today's run on middlecoin seems like it will be about .0208 BTC/MH/day those who are advertising their rigs for less than that are just loosing money...
yes guys you will be losing money (few microBTC) for 1 day please raise your price immideately
Yes i was inferring this
.. anyways no loss for me Ill just keep my rig prices slightly above middlecoin earnings and if nobody rents mine because of low-ballers then my rigs will hash away on middlecoin. cgminer has 5min delay for switch - testing stability. This is another issue
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
It's a fork of CGMiner 3.8.5
I can give you 40 GH/s on BFGMiner if you want to test it out.
Today's run on middlecoin seems like it will be about .0208 BTC/MH/day those who are advertising their rigs for less than that are just loosing money...
yes guys you will be losing money (few microBTC) for 1 day please raise your price immideately
I did some more work on it; customers can now add pools in bulk for all hired rigs.
Rated price calculator on admin panel.
Some bug fixes. More coming soon...
Rated price calculator on admin panel.
Some bug fixes. More coming soon...
Regarding price calculator:
var r = (np * 24) / (nh * parseFloat(spd));
I am getting sloppy at math lol
I did some more work on it; customers can now add pools in bulk for all hired rigs.
Rated price calculator on admin panel.
Some bug fixes. More coming soon...
Rated price calculator on admin panel.
Some bug fixes. More coming soon...
Regarding price calculator:
var r = (np * 24) / (nh * parseFloat(spd));
Today's run on middlecoin seems like it will be about .0208 BTC/MH/day those who are advertising their rigs for less than that are just loosing money...
cgminer has 5min delay for switch - testing stability. This is another issue
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
modified CGMiner for Antminers - is this fork of cgminer, from which version?
I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.
Sadly, but cgminer will not delete the only active pool, no matter how hard you try. It wants to have at least one pool alive at all times.
One workaround I can think of - set up a dummy stratum server that does enough to appear "alive", so you can delete the customer's details.
Only problem is that cgminer will then refuse to delete the dummy server... but at least it stops cgminer being fixated on the customer's pool.
There's something that leaserig is doing, or a bug in cgminer, that seems to be causing it to declare pools which work just fine 'Dead.' I add in exactly the same details as a second pool and it connects instantly.
Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.
For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.
Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.
Jump to: