Topic: [ANN] Technobit HEX16B(Bitfury based) 16 chip board design - page 25. (Read 56527 times)
I had no problems with Technobit apart from the software. My order shipped on time and the devices work. My previous order was with BFL and compared to that, even with the time I could not mine because I could not figure out how to build the patched cgminer, Technobit comes out ahead by about 7 months.
in the end i have marto74 attention with PM, he have certainly to improve customers relationship but DON'T tell him scammer or other strong negative word, he is a serious person.
Expose your problem in a clean manner and be patient, he answer you in the same manner and solve your problem in the best way.
i have unlucky experience with my order but my opinion of technobit.eu and marto74 is POSITIVE
Expose your problem in a clean manner and be patient, he answer you in the same manner and solve your problem in the best way.
i have unlucky experience with my order but my opinion of technobit.eu and marto74 is POSITIVE
Why are you people bashing technobit?
Even my second order went perfect, maby a bit late but then again it's better than pre-order!
In total i have ordered more than 10 miners, in the end the only thing that counts is that it works.
So keep in mind, this is still better than pre-order. And for all the other people who are not sure what they are ordering, just ask it before you buy... seems a logic thing to do right?
Even my second order went perfect, maby a bit late but then again it's better than pre-order!
In total i have ordered more than 10 miners, in the end the only thing that counts is that it works.
So keep in mind, this is still better than pre-order. And for all the other people who are not sure what they are ordering, just ask it before you buy... seems a logic thing to do right?
No I do not treat nobody like shit.
We just have troubles in production and did not have personnel to deal with customers.
Now We have, will see if it works better
Best Martin
We just have troubles in production and did not have personnel to deal with customers.
Now We have, will see if it works better
Best Martin
This guy is a nightmare in 3-D!
Fuck technobit.eu
Fuck technobit.eu
+1 .
I am glad that i got my boards and they work well, and looks like good build quality... but if given the chance to go back in time... i would stop myself from making this order.
So you are +1 .............
With a man that did ordered assembly service without having chips to ship and then
ordering 2 other orders without reading that it is December shipment.
No. I don't know his story... +1 to the fact that you were a nightmare to deal with... and treat buyers like shit.
HY marto,
THX for the fast help and the info for the update. Very Nice. My next order will come
THX for the fast help and the info for the update. Very Nice. My next order will come
Just send it back to our sending addres from the waybill and We'll return you new one
Best Martin
Best Martin
i have post log of bfgminer under linux and win 7 and this is a photo of the nanofury broken, i hope that is good quality. solder are apparently ok and i don't see broken component
Also if you are using stratum pool (set bottom left) - you need to set top left pool setting to localhost to use the stratum proxy... Clicking the start button bottom left should launch the proxy (or keep the autostart ticked)...
Melb
Melb
Hy,
when i use the proxy, the HEXMiner will freeze and do nothing. In the Console i see, that open a connection 1 peer, but when the Hexminer is freeze... nothing, no work....
You have a PM.
Also if you are using stratum pool (set bottom left) - you need to set top left pool setting to localhost to use the stratum proxy... Clicking the start button bottom left should launch the proxy (or keep the autostart ticked)...
Melb
Melb
Hy,
when i use the proxy, the HEXMiner will freeze and do nothing. In the Console i see, that open a connection 1 peer, but when the Hexminer is freeze... nothing, no work....
Also if you are using stratum pool (set bottom left) - you need to set top left pool setting to localhost to use the stratum proxy... Clicking the start button bottom left should launch the proxy (or keep the autostart ticked)...
Melb
Melb
Hy,
when i use the proxy, the HEXMiner will freeze and do nothing. In the Console i see, that open a connection 1 peer, but when the Hexminer is freeze... nothing, no work....
This guy is a nightmare in 3-D!
Fuck technobit.eu
Fuck technobit.eu
+1 .
I am glad that i got my boards and they work well, and looks like good build quality... but if given the chance to go back in time... i would stop myself from making this order.
So you are +1 .............
With a man that did ordered assembly service without having chips to ship and then
ordering 2 other orders without reading that it is December shipment.
stop spamming everywhere.
Your first order is assembly service and we are waiting for your chips.
Both your second and third orders are December shipment and they will be shipped on time
Best Martin
Your first order is assembly service and we are waiting for your chips.
Both your second and third orders are December shipment and they will be shipped on time
Best Martin
REPLY MY POST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
When can I expect my order EVAEOQNVV - please check
When can I expect my order EVAEOQNVV - please check
When can I expect my order EVAEOQNVV - please check
Best Martin
This guy is a nightmare in 3-D!
Fuck technobit.eu
Fuck technobit.eu
+1 .
I am glad that i got my boards and they work well, and looks like good build quality... but if given the chance to go back in time... i would stop myself from making this order.
This guy is a nightmare in 3-D!
Fuck technobit.eu
Fuck technobit.eu
Got my 2 units today.
Tested both, on desktop and the pi. Running one at the moment because i have only 1 USB cable. Works like a charm.
Nice Tested both, on desktop and the pi. Running one at the moment because i have only 1 USB cable. Works like a charm.
Can you give us order and payment date plz? To give others waiters a comparison point...
2013-11-23 1 846,00€ bitpay Payment accepted - Add to order 2€
2013-11-22 463,00€ bitpay Payment accepted - Add to order 2€
2013-11-19 528,70€ PayPal Shipped - Arrived 13th Dec 2013 - DPD Economy 30€
They were all for December batch 1 shipment.
I was expecting Marto to combine the orders, left note on each order, but this did not happen.
The TP-Router did not arrive pre-flashed.
There was no tracking number after it changed to "shipped" and the order came via Speedy not DPD.
The one that has arrived is working good. I'm impressed with the craftsmanship.
This is my first order with Technobit and I'd be happy to buy more if he can ship the rest of my order.
Marto, how can I get you to ship the rest of my order?
I'm happy to send you some more for shipping if that's the problem.
How about adding an item your Accessories page called "Add More Shipping" or something like that.
I thought about ordering a couple of USB cables, but I'm worried I might just get the USB cables!
I think items have Ben oversold and that is why it is taking so long to send them out. Quite likely the November orders are not ready and that is why shipping is marked as cancelled. If this was not the case it would not take more than 2 weeks to resend them.
The "I will refund you and not accept orders from you again" is nnot a normal approach to business imho.
But again you only hear back if you mention the word legal so... not really holding my breath to a response let alone to receiving my order.
That said I lot nearly 1 month of mining which yes is arguable but it is what it is so no, will not accept a simple refund yet, I want my items.
The "I will refund you and not accept orders from you again" is nnot a normal approach to business imho.
But again you only hear back if you mention the word legal so... not really holding my breath to a response let alone to receiving my order.
That said I lot nearly 1 month of mining which yes is arguable but it is what it is so no, will not accept a simple refund yet, I want my items.
Actually the miner is not ready stock. They need up to 4 week for production & marto did mention about production problem with november order.
About cancelled shipping is from speedy side maybe due to document problem. I had similar problem with speedy & my miner stuck in speedy office for 3 week just because of proforma invoice. In the end marto still send proforma invoice with wrong item quantity.
I guess speedy don't want to take similar situation because i complain everyday to speedy by mail. My guess is you are not in EU right?
Well we are looking at november orders stuck in "cancelled" status and i understand what you are saying however if the only reply we get is "i will refund you and not accept orders from you again" please allow me to be suspicious.
I did say many times that yes i questioned if this was a scam or not (main reason is it seems there are no issues with small orders but only for larger orders) and that if it turns out to be all good i will have no issues in taking back everything i said.
But again the response was as above which continues to leave us in the dark.
If the issue is speedy, why not opt for other curiuers, i have arranged for shipping within eu and also outside the eu many times and with all the main companies without problems, and trust me shipping human blood is not so simple as shipping a piece of hardware.
Again no reply to the questions regarding the use of other services.
Can you give us order and payment date plz? To give others waiters a comparison point...
Got my 2 units today.
Tested both, on desktop and the pi. Running one at the moment because i have only 1 USB cable. Works like a charm.
Tested both, on desktop and the pi. Running one at the moment because i have only 1 USB cable. Works like a charm.
ordered and payed via bitpay : 2013-11-14
reference : "3-rd Week NOVEMBER Delivery"
Speedy tracking: 2013-12-06 17:07:55 Courier Pick-up
Can you give us order and payment date plz? To give others waiters a comparison point...
Got my 2 units today.
Tested both, on desktop and the pi. Running one at the moment because i have only 1 USB cable. Works like a charm.
Tested both, on desktop and the pi. Running one at the moment because i have only 1 USB cable. Works like a charm.
Jump to: