[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com - page 179.

igoork

newbie

Activity: 47

Merit: 0

Can someone post me the config for sgminer 4.1.0 using custom kernel.
I cannot get it to work via cgwatcher. I'm using sgminer 4.0.0 without any problems.

nowaltcoin

full member

Activity: 158

Merit: 100

Quote from: tomashas on March 11, 2014, 05:50:22 PM

Quote from: nowaltcoin on March 11, 2014, 04:19:42 PM

Did you try gpu-thread: 2 and xintensity with your hw-configuration
and one of the experimental kernels in sgminer ?
You can reach over 90% of your hashrate for WU:

I have got
1.18MH/s and 1100WU
1.40MH/s and 1297WU

I noticed there's a /kernel folder with a couple files in there (alexkarnew.cl alexkarold.cl ckolivas.cl psw.cl zuikkis.cl) but to be honest I wouldn't know how to tell sgminer to use one of them.

My config is:

Code:

"intensity" : "20",
"vectors" : "1",
"worksize" : "512",
"kernel" : "scrypt",
"gpu-dyninterval" : "7",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "30",
"shaders" : "2816",
"thread-concurrency" : "24550",
"gpu-powertune" : "18",
"gpu-thread" : "1",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-vddc" : "1.000",
"gpu-engine" : "950",
"gpu-memclock" : "1500"

I'm pretty happy the graphs on Clevermining are now a lot more realistic, I guess patience isn't my strongest point Wink

http://dump.chiko.nl/g/a82334.png

if you use the new sgminer "kernel" :"scrypt", is no longer valid
it will use "kernel" :"ckolivas" anyway

so if you want to check which kernel is the best you can use:

"kernel" :"ckolivas,zuikkis,alexkarold,alexkarnew" ----> config for 4 GPU every GPU using a different kernel

but please have a look at the readme when using alexkarold/alexkarnew

if you new help in trying gpu-thread :2 and xintensity just PM me!

stay tuned

joshv06

hero member

Activity: 991

Merit: 500

Is the hashrate shown on the status page the accepted hashrate with rejects subtracted? Or is it just the Accepted hashrate?

Thanks!

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: rammy2k2 on March 11, 2014, 04:07:19 PM

Quote from: rammy2k2 on March 11, 2014, 02:47:01 PM

Quote from: byt411 on March 11, 2014, 02:38:40 PM

Quote from: rammy2k2 on March 11, 2014, 02:27:53 PM

you should lower pool diff , scryptguild has from 32 to 256 , clever has only 512 ....

I agree. Before, it was vardiff, 16 to 1024, but for "technical issues" it was disabled. I think its about time you switched it back on.

yea, please go back

ibfragalot

member

Activity: 98

Merit: 10

Quote from: Kifissia on March 11, 2014, 10:13:39 PM

Are you using the --scrypt (bat file) or "scrypt" : true (.conf file) command? Because looks like you are mining SHA-256 and not scrypt. Also, your WU (work units) are 0. So you are practically mining nothing Tongue

Thats it! Thank you

Somehow the --script got deleted when making up my new batch. Thanks again.

ozzy1926

sr. member

Activity: 378

Merit: 250

what will happen if i live in eu and choose asia server which seem to have lower rejects?My total hashrate drops because i am far from asia due to high ping?

Kifissia

member

Activity: 81

Merit: 10

Quote from: pengoau on March 11, 2014, 10:15:46 PM

Quote from: Kifissia on March 11, 2014, 10:07:13 PM

The default for cgminer is 120sec.

And I have no god damn clue what scan-time is Tongue

cgminer --help

Yeah, I read directly from the readme file but still cant understand the meaning of :

Upper bound on time spent scanning current work, in seconds (default: -1) Scan current work for what? Also, we use 1 not -1.

Quote from: FCR on March 11, 2014, 10:16:47 PM

Quote from: Kifissia on March 11, 2014, 09:40:01 PM

Quote from: pengoau on March 11, 2014, 09:22:20 PM

Couldn't help myself... now rejects are about 32% with the defaults after an hour.

Will trial:

"scan-time": "1",
"expiry": "1",
"queue": "5",

Hmm.. My WUs dropped after these settings. I ll try the low mem command.

I get over 90% WU. There doesn't seem to be any right answer for everyone, you just have to see what works for your system. Plus you have to run it for more than 20 minutes to get your real rates.

Yup, looks like it. Anyway, I ll leave it for the night with

"scan-time": "1",
"expiry": "120",
"queue": "0",

and see what happens in the morning

FCR

newbie

Activity: 31

Merit: 0

Quote from: Kifissia on March 11, 2014, 09:40:01 PM

Quote from: pengoau on March 11, 2014, 09:22:20 PM

Couldn't help myself... now rejects are about 32% with the defaults after an hour.

Will trial:

"scan-time": "1",
"expiry": "1",
"queue": "5",

Hmm.. My WUs dropped after these settings. I ll try the low mem command.

I get over 90% WU. There doesn't seem to be any right answer for everyone, you just have to see what works for your system. Plus you have to run it for more than 20 minutes to get your real rates.

pengoau

full member

Activity: 208

Merit: 100

Quote from: Kifissia on March 11, 2014, 10:07:13 PM

The default for cgminer is 120sec.

And I have no god damn clue what scan-time is Tongue

cgminer --help

Kifissia

member

Activity: 81

Merit: 10

Quote from: ibfragalot on March 11, 2014, 10:11:25 PM

Can someone explain this for me?

> After several hours I can't find any stats for my username(bitcoin address) ?

> My 900 khs system is showing 5Mh/s!?

(5s):5.155M (avg):5.105Mh/s | A:0 R:0 HW:0 WU:0.1/m

Thanks.

Are you using the --scrypt (bat file) or "scrypt" : true (.conf file) command? Because looks like you are mining SHA-256 and not scrypt. Also, your WU (work units) are 0. So you are practically mining nothing Tongue

Kifissia

member

Activity: 81

Merit: 10

Quote from: pengoau on March 11, 2014, 10:10:32 PM

I'm using sgminer v4.1

Fork of cgminer made for gpus.

Get it here: https://mega.co.nz/#!rVAT1C7T!hY5TQnUQybBLWzPSglaAZCJlxTHIT0W1pvFjubcfVuQ

Thats my version that I made an installer for. Run it thru an antivrius.

Thanks. I tried sgminer 4.1 but didnt see any differences (at least visually) compared to cgminer kalrtoh edition

ibfragalot

member

Activity: 98

Merit: 10

Can someone explain this for me?

> After several hours I can't find any stats for my username(bitcoin address) ?

> My 900 khs system is showing 5Mh/s!?

(5s):5.155M (avg):5.105Mh/s | A:0 R:0 HW:0 WU:0.1/m

Thanks.

pengoau

full member

Activity: 208

Merit: 100

I'm using sgminer v4.1

Fork of cgminer made for gpus.

Get it here: https://mega.co.nz/#!rVAT1C7T!hY5TQnUQybBLWzPSglaAZCJlxTHIT0W1pvFjubcfVuQ

Thats my version that I made an installer for. Run it thru an antivrius.

Kifissia

member

Activity: 81

Merit: 10

The default for cgminer is 120sec.

And I have no god damn clue what scan-time is Tongue

pengoau

full member

Activity: 208

Merit: 100

Good point, I'll just leave the expiry at its default of 28 seconds.

So I'm just using --scan-time 1 --queue 0

Your settings are ok Kifissia

Kifissia

member

Activity: 81

Merit: 10

Quote from: pengoau on March 11, 2014, 09:45:54 PM

Set queue to 0 as with 5 I was getting 40%+ rejects.

"scan-time": "1",
"expiry": "1",
"queue": "0",

This??? I just changed queue on my own to 0 Tongue

What about expiry? I thought we dont want our work to expire after 1 sec because the server accepts some stales.

Anyway, 1-1-0 settings?

pengoau

full member

Activity: 208

Merit: 100

Set queue to 0 as with 5 I was getting 40%+ rejects.

Kifissia

member

Activity: 81

Merit: 10

Quote from: pengoau on March 11, 2014, 09:22:20 PM

Couldn't help myself... now rejects are about 32% with the defaults after an hour.

Will trial:

"scan-time": "1",
"expiry": "1",
"queue": "5",

Hmm.. My WUs dropped after these settings. I ll try the low mem command.

pengoau

full member

Activity: 208

Merit: 100

Couldn't help myself... now rejects are about 32% with the defaults after an hour.

Will trial:

"scan-time": "1",
"expiry": "1",
"queue": "5",

adrenaline_x

newbie

Activity: 6

Merit: 0

Quote from: tomashas on March 11, 2014, 03:07:31 PM

Can anyone shed some light on the following?

My rig is reporting 4.2Mh/s average ( http://dump.chiko.nl/g/b1a725.png ) yet on the website it says 2.7 ( http://dump.chiko.nl/g/7983b5.png )

This may be paranoid, but I'm starting to think maybe my sgminer binary is skimming off my hashrate somehow.

Nope. the pool can have high rejects compared to other pools.. But this pool stats can sometime also be off.

over the past week i went back to a different pool with less stats and lower mh/s / btc and even with the lower published stats of mh/s to btc on that pool versus the higher rate on this pool, i made more on the other pool..

Try another pool after a few days and see what the difference is.

Topic: [ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com - page 179. (Read 554401 times)