[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com - page 241.

Axco

newbie

Activity: 56

Merit: 0

In the last 15 minutes or so I have had this message several times from cgminer:

:new block detected on network before longpoll
:work available from pools resuming.
:stratum connection to pool 0 interrupted
:lost 3 shares due to stratum disconnect on pool 0
:pool 0 stratum+tcp://us.clevermining.com:3333 not responding
:waiting for work to be available from pools

Its now 4 times in the last 15 mins
1st time lost 3 shares,
then 16 shares,
then 10 shares,
then 4 shares.

Is this a problem at the server side or my side ?

I have 2 rigs at next to each other, first it started on 1 now its doing the same on both ?

Help and advice please.

(I have taken screen shots but do not know how to post them on this forum)

Thanks,
Axco.

bloodrainer

newbie

Activity: 5

Merit: 0

vardiff is disabled until further notice, as it needs reprogramming. 512 diff is just affecting variance, it doesnt do any difference on a longer period of time, which i can confirm, based on my 350khs of experience.

All4Potcoin

newbie

Activity: 1

Merit: 0

Is vardiff broken? my difficulty is 512 and i think that's too high.

Tranklukator

newbie

Activity: 4

Merit: 0

Yes I see now. thank you.

Axco

newbie

Activity: 56

Merit: 0

That is your 24hr average kh/s rate

If you look on your user page, user = btc address,

You will find 3 tabs PROFIT / HASHRATE / 24HR HASHRATE

Look there for more frequent updates, every 10 minutes updates.

Tranklukator

newbie

Activity: 4

Merit: 0

Thank you my good man. now all is clear. we must wait. on the Russian forum explanations did not. write through an interpreter. Wink

Sturmvogel

newbie

Activity: 52

Merit: 0

Quote from: Tranklukator on February 24, 2014, 09:16:43 AM

Please explain why the speed is not the shows? should be 2880 Kh/s. I already twisted inside out.

http://picture-host.ru/v.php?id=56cba9d8da14767a564d25353e306079
http://picture-host.ru/pic_s/56cba9d8da14767a564d25353e306079.jpg

It's 24 hour average, will be correct after mining for a full day

Terk

hero member

Activity: 616

Merit: 522

Quote from: Tranklukator on February 24, 2014, 09:16:43 AM

Please explain why the speed is not the shows? should be 2880 Kh/s. I already twisted inside out.

http://picture-host.ru/v.php?id=56cba9d8da14767a564d25353e306079

Seems like you just started. This is a last clock hour average so if you started 20 minutes before hour ends you will see 1/3 of your hashrate here because you've been mining for 1/3 of the hour. I'll be redoing user pages to make them more clear.

Tranklukator

newbie

Activity: 4

Merit: 0

Please explain why the speed is not the shows? should be 2880 Kh/s. I already twisted inside out.

http://picture-host.ru/v.php?id=56cba9d8da14767a564d25353e306079
http://picture-host.ru/pic_s/56cba9d8da14767a564d25353e306079.jpg

talisin

newbie

Activity: 33

Merit: 0

Quote from: csa1234 on February 24, 2014, 08:51:49 AM

im getting 36% reject in just 1 hour of hashing. Something is wrong with your pool, and is not on my side, cause im getting 2% reject only on middlecoin pool

Please check or let me know how can i reduce this rejects %

Mine had shot up also, but seems to have gone back to a normal state now.

SanderHelgesen

newbie

Activity: 4

Merit: 0

Quote from: big_coins on February 24, 2014, 08:52:08 AM

any ETA on the EURO server, the ping to the NSA is killing me.

thanks!

Tue/Wed if nothing unexpected happens

superman3486

newbie

Activity: 59

Merit: 0

Quote from: big_coins on February 24, 2014, 08:52:08 AM

any ETA on the EURO server, the ping to the NSA is killing me.

thanks!

I dont think you should be connecting to the NSA, that might be your issue Roll Eyes

big_coins

full member

Activity: 175

Merit: 100

any ETA on the EURO server, the ping to the NSA is killing me.

thanks!

csa1234

full member

Activity: 289

Merit: 100

O2-Protocol.com Carbon Offset DeFi

im getting 36% reject in just 1 hour of hashing. Something is wrong with your pool, and is not on my side, cause im getting 2% reject only on middlecoin pool

Please check or let me know how can i reduce this rejects %

williamj2543

hero member

Activity: 588

Merit: 500

Get ready for PrimeDice Sig Campaign!

Quote from: Prima Primat on February 24, 2014, 07:22:23 AM

Quote from: SirGeekalot on February 24, 2014, 04:32:57 AM

I seem to having an Odd issue.

This is my first Rig and as such i started off slow with 2x Asus R9 270s. Each card is Hashing at ~460 KH/s. giving me a 920Kh/s total for my machine.

but CM is showing me with a Higher hash rate and that's not including any Rejects?

Terk, is there any chance you can check if there is more that one Worker pointed at my account? User id = 1FM487fLK7ocJkd3BipDvYG2fyMHTeDM3Y

https://i.imgur.com/rYaytD8.jpg https://i.imgur.com/2QE7MCb.jpg

The KH/s reported by the website is always a bit random because it's based on submitted shares. If you suspect that someone else is using the same address, you can just stop your workers for 10 minutes and see if there's any hashrate left. But it's extremely, extremely, and I mean extremely unlikely that any two people will ever generate the same Bitcoin address.

Sirgeekalot I don't think its possible for someone else to have the same BTC address, and if they are accidentaly mining on yours that is good for you Wink

Or you are just getting lucky with accepted shares, and the website estimates your hashrate based on your accepted shares.

Prima Primat

member

Activity: 117

Merit: 10

Quote from: SirGeekalot on February 24, 2014, 04:32:57 AM

I seem to having an Odd issue.

This is my first Rig and as such i started off slow with 2x Asus R9 270s. Each card is Hashing at ~460 KH/s. giving me a 920Kh/s total for my machine.

but CM is showing me with a Higher hash rate and that's not including any Rejects?

Terk, is there any chance you can check if there is more that one Worker pointed at my account? User id = 1FM487fLK7ocJkd3BipDvYG2fyMHTeDM3Y

https://i.imgur.com/rYaytD8.jpg https://i.imgur.com/2QE7MCb.jpg

The KH/s reported by the website is always a bit random because it's based on submitted shares. If you suspect that someone else is using the same address, you can just stop your workers for 10 minutes and see if there's any hashrate left. But it's extremely, extremely, and I mean extremely unlikely that any two people will ever generate the same Bitcoin address.

Axco

newbie

Activity: 56

Merit: 0

Hi SanderHelgesen,

I Have 2 of the XFX Radeon R9 280x, the best I have had out of them is 710kh/s, but they are running very stable at 702kh/s each, using cgminer 3.7.2

My config for them is this:

-w 256 -g 2 --thread-concurrency 8192 --intensity 13 --shaders 2048 --gpu-powertune 20

GPU core clock = 1020, mem clock = 1500, volts 1200mn

You may want to add auto fan or some other bits relative to your system, I have another program running that looks after the fans and temps, clock speeds and voltage.

Both cards are in my desktop PC the temps run at 83c top card and 69c bottom card.

Hope this is of some help. What kh/s rate are you getting with guiminer ?

SanderHelgesen

newbie

Activity: 4

Merit: 0

I need sone hjelp to my rig. Im using guiminer and i want to use cgmimer but i dont get as good hash rate Sad

So could anyone send me some config files

- XFX Radeon R9 280x 3gb GDDR5

- XFX Radeon R9 290 4gb GDDR5

- Sapphire Radeon HD 7970 3gb GDDR5

SirGeekalot

full member

Activity: 156

Merit: 100

Quote from: tek428 on February 24, 2014, 05:22:37 AM

May I ask what your config is to get 460 out of those cards? I can't seem to get mine above 420.

sure, i've undervolted using VBE7 to 1.1V and i'm using SGMiner 4.1.0-73-g80e6.

i know of others who have got upto 480 stable but they're overclocking too much for my liking and i cant get my MemClock to go above 1400 anyway. i think my cards might last a bit longer like this.

Code:

"xintensity" : "4",
"gpu-threads" : "2",
"worksize" : "256",
"gpu-engine" : "1055",
"gpu-fan" : "0-100",
"gpu-memclock" : "1250",
"thread-concurrency" : "5121",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "80",
"temp-target" : "75",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "30",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel" : "zuikkis",
"monitor" : "cat >> /home/cgminer.log",
"kernel-path" : "/opt/miners/sgminer/kernel"

tek428

newbie

Activity: 19

Merit: 0

Quote from: SirGeekalot on February 24, 2014, 04:32:57 AM

I seem to having an Odd issue.

This is my first Rig and as such i started off slow with 2x Asus R9 270s. Each card is Hashing at ~460 KH/s. giving me a 920Kh/s total for my machine.

but CM is showing me with a Higher hash rate and that's not including any Rejects?

Terk, is there any chance you can check if there is more that one Worker pointed at my account? User id = 1FM487fLK7ocJkd3BipDvYG2fyMHTeDM3Y

https://i.imgur.com/rYaytD8.jpg https://i.imgur.com/2QE7MCb.jpg

May I ask what your config is to get 460 out of those cards? I can't seem to get mine above 420.

Topic: [ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com - page 241. (Read 554401 times)