ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH - page 221.

navigatrix

member

Activity: 71

Merit: 10

Quote from: alienesb on January 13, 2015, 03:40:24 PM

Until miner link comes online, is there something else we can use to control multiple miners with a single interface? Things like auto restart times, pool switching... etc.

Try M's Miner Monitor.

https://bitcointalksearch.org/topic/ms-miner-antsp-monitor-v52-alertsautomassscheduled-rebootmobile-miner-596178

I can see all my Ants and you can set up alerts and auto-reboot by hash rate, time, etc.

Though my auto-reboot setting for low hash rate only works intermittently...

But I can monitor all my miners on the other side of the house with my laptop in the living room. On the Miner Output tab you can right-click and reboot the selected miner manually if need be.

navigatrix

member

Activity: 71

Merit: 10

Quote from: Dr.Miner on January 13, 2015, 06:45:27 AM

Quote from: MyRig on January 13, 2015, 06:41:56 AM

let us know what we can do

What can be the problem?Overheat?PSU?
A have a coolermaster V700.
So i'm thinking about the pool, but seems fine.

Well, if it's beeping, it's getting power...

You might have a bad Ethernet cable or connector.
When it does run, you should be able to see the temps on the interface. anything under 60 Celsius is good.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: coinits on January 14, 2015, 09:58:31 PM

Quote from: Biodom on January 14, 2015, 09:42:32 PM

Quote from: coinits on January 14, 2015, 09:25:12 PM

Quote from: MyRig on January 14, 2015, 07:36:36 PM

Hey Satoshi!

Sure!

The unit is defaulted to DHCP, so please make sure the router side can assign your S5 an IP address. Then you are good to go!

Quote from: coinits on January 14, 2015, 07:21:38 PM

Can I use one of these to hook up my s5 and others that I plan on getting?

snip

I have a fiber optic 100 MB/S upload and download connection.

I can't find this in North America and I have no idea how to tell if it is defaulted to DHCP. I found this one...will it work?

http://www.amazon.com/gp/product/B000AOEA7A (there are 4 different types on that link - doesn't matter which one as long as one works.

easier choice is to grab one at either amazon or microcenter (if you are near one)
Prices are the same-$20 or $25
microcenter:
http://www.microcenter.com/product/361816/5_Port_Gigabit_Desktop_Switch
amazon
http://www.amazon.com/TP-LINK-TL-SG1005D-1000Mbps-Gigabit-Capacity/dp/B000N99BBC/
but i suggest to grab 8-port one (if you will expand)
amazon
http://www.amazon.com/TP-LINK-TL-SG1008D-1000Mbps-Switching-Capacity/dp/B001EVGIYG/
microcenter
http://www.microcenter.com/product/361817/TL-SG1008D_8_Port_10-100-1000_Gigabit_Desktop_Switch

you connect the switch to a router, then connect miner to a switch via ethernet cord

OK. Thanks. Ordered the 8-port

One last question and I will leave you guys alone.

Can I split a line where my Cat 5 come out of the wall with one of these?

http://www.amazon.ca/Acctown-Ethernet-Splitter-Connector-Adapter/dp/B00KKYOZUM

I want to set one up right by my PC for testing purposes and it only has one wall socket.

typically you have cable going to the cable box and not the cat5 ethernet, then you have cable box connected via ethernet cable to the WAN port on the router, but router typically have more than one LAN port. Your PC could be connected to one LAN port and miner (or switch) could be connected to another LAN port. Not sure re splitter.

PeaMine

hero member

Activity: 979

Merit: 510

Quote from: dogie on January 14, 2015, 01:40:23 PM

Quote from: alienesb on January 14, 2015, 12:07:21 PM

...and another one 1/2 dies on me. This is getting tiresome, I could have just got some S3s if I wanted 500 speed.

Reboot, change frequency, hard reboot, new PSU... same thing. That's two now Angry

What PSU were you on, and what now?

EVGA SuperNOVA 850 G2 220-G2-0850-XR 850W ATX12V / EPS12V SLI Ready 80 PLUS GOLD
Same issue as alienesb, has happened once after updating Firmware, numerous times before. Seems to fix itself without a restart after many hours. Trying to look into what may be causing it but have found nothing on my side so far.
Currently both of my S5's are sustaining 1100+GH default settings after a power cycle, so will wait for it to happen again and see if I can find anything in the logs.

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: Biodom on January 14, 2015, 09:42:32 PM

Quote from: coinits on January 14, 2015, 09:25:12 PM

Quote from: MyRig on January 14, 2015, 07:36:36 PM

Hey Satoshi!

Sure!

The unit is defaulted to DHCP, so please make sure the router side can assign your S5 an IP address. Then you are good to go!

Quote from: coinits on January 14, 2015, 07:21:38 PM

Can I use one of these to hook up my s5 and others that I plan on getting?

snip

I have a fiber optic 100 MB/S upload and download connection.

I can't find this in North America and I have no idea how to tell if it is defaulted to DHCP. I found this one...will it work?

http://www.amazon.com/gp/product/B000AOEA7A (there are 4 different types on that link - doesn't matter which one as long as one works.

easier choice is to grab one at either amazon or microcenter (if you are near one)
Prices are the same-$20 or $25
microcenter:
http://www.microcenter.com/product/361816/5_Port_Gigabit_Desktop_Switch
amazon
http://www.amazon.com/TP-LINK-TL-SG1005D-1000Mbps-Gigabit-Capacity/dp/B000N99BBC/
but i suggest to grab 8-port one (if you will expand)
amazon
http://www.amazon.com/TP-LINK-TL-SG1008D-1000Mbps-Switching-Capacity/dp/B001EVGIYG/
microcenter
http://www.microcenter.com/product/361817/TL-SG1008D_8_Port_10-100-1000_Gigabit_Desktop_Switch

you connect the switch to a router, then connect miner to a switch via ethernet cord

OK. Thanks. Ordered the 8-port

One last question and I will leave you guys alone.

Can I split a line where my Cat 5 come out of the wall with one of these?

http://www.amazon.ca/Acctown-Ethernet-Splitter-Connector-Adapter/dp/B00KKYOZUM

I want to set one up right by my PC for testing purposes and it only has one wall socket.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: coinits on January 14, 2015, 09:25:12 PM

Quote from: MyRig on January 14, 2015, 07:36:36 PM

Hey Satoshi!

Sure!

The unit is defaulted to DHCP, so please make sure the router side can assign your S5 an IP address. Then you are good to go!

Quote from: coinits on January 14, 2015, 07:21:38 PM

Can I use one of these to hook up my s5 and others that I plan on getting?

snip

I have a fiber optic 100 MB/S upload and download connection.

I can't find this in North America and I have no idea how to tell if it is defaulted to DHCP. I found this one...will it work?

http://www.amazon.com/gp/product/B000AOEA7A (there are 4 different types on that link - doesn't matter which one as long as one works.

easier choice is to grab one at either amazon or microcenter (if you are near one)
Prices are the same-$20 or $25
microcenter:
http://www.microcenter.com/product/361816/5_Port_Gigabit_Desktop_Switch
amazon
http://www.amazon.com/TP-LINK-TL-SG1005D-1000Mbps-Gigabit-Capacity/dp/B000N99BBC/
but i suggest to grab 8-port one (if you will expand)
amazon
http://www.amazon.com/TP-LINK-TL-SG1008D-1000Mbps-Switching-Capacity/dp/B001EVGIYG/
microcenter
http://www.microcenter.com/product/361817/TL-SG1008D_8_Port_10-100-1000_Gigabit_Desktop_Switch

you connect the switch to a router, then connect miner to a switch via ethernet cord

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Quote from: coinits on January 14, 2015, 09:25:12 PM

I can't find this in North America and I have no idea how to tell if it is defaulted to DHCP. I found this one...will it work?
http://www.amazon.com/gp/product/B000AOEA7A (there are 4 different types on that link - doesn't matter which one as long as one works.

That is a simple switch, and has no need for DHCP; it will be enable communication between the S5 and your network's DHCP server.

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: MyRig on January 14, 2015, 07:36:36 PM

Hey Satoshi!

Sure!

The unit is defaulted to DHCP, so please make sure the router side can assign your S5 an IP address. Then you are good to go!

Quote from: coinits on January 14, 2015, 07:21:38 PM

Can I use one of these to hook up my s5 and others that I plan on getting?

I have a fiber optic 100 MB/S upload and download connection.

I can't find this in North America and I have no idea how to tell if it is defaulted to DHCP. I found this one...will it work?

http://www.amazon.com/gp/product/B000AOEA7A (there are 4 different types on that link - doesn't matter which one as long as one works.

ATCkit

hero member

Activity: 786

Merit: 1000

Quote from: raywillet on January 14, 2015, 07:37:36 PM

Got my S5 hooked up, super easy. Nice foam packaging. First time mining since my GPU burnt up in 2011.

Average hash of 1153 with temps of 46/48. Hope this is a good start to a new farm. Hell with the price of BTC, this is a great hobby for me!

and the S5 costs only a bit more than a good GPU

Welcome back to mining.

raywillet

newbie

Activity: 19

Merit: 0

Got my S5 hooked up, super easy. Nice foam packaging. First time mining since my GPU burnt up in 2011.

Average hash of 1153 with temps of 46/48. Hope this is a good start to a new farm. Hell with the price of BTC, this is a great hobby for me!

MyRig

donator

Activity: 792

Merit: 510

[email protected]

Hey Satoshi!

Sure!

The unit is defaulted to DHCP, so please make sure the router side can assign your S5 an IP address. Then you are good to go!

Quote from: coinits on January 14, 2015, 07:21:38 PM

Can I use one of these to hook up my s5 and others that I plan on getting?

I have a fiber optic 100 MB/S upload and download connection.

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: Biodom on January 14, 2015, 07:20:14 PM

Quote from: coinits on January 14, 2015, 07:15:12 PM

Quote from: Phosphorous on January 14, 2015, 05:30:48 PM

Just got my Batch 4 S5's. Bitmain is now shipping using foam rather than the inflated tubes/bags. First thing I did was install the Nocturna fan mentioned earlier in this thread. Best money ever spent! Completely tolerable now. After 70 minutes, running 61deg on both sides and 1.125Gh.

I can't find a link. Do you have one?

Thnx!

Noctua
http://www.amazon.com/Bearing-NF-F12-iPPC-3000-PWM/dp/B00KFCRATC
this is prime-fast shipping, only 6 left.
one from platinum micro is on the bottom right of the same page ($24.5, maybe slower shipping)

I got the last one on the Canuckistan site. Can't order from .com easily here. Thanks!

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Can I use one of these to hook up my s5 and others that I plan on getting?

I have a fiber optic 100 MB/S upload and download connection.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: coinits on January 14, 2015, 07:15:12 PM

Quote from: Phosphorous on January 14, 2015, 05:30:48 PM

Just got my Batch 4 S5's. Bitmain is now shipping using foam rather than the inflated tubes/bags. First thing I did was install the Nocturna fan mentioned earlier in this thread. Best money ever spent! Completely tolerable now. After 70 minutes, running 61deg on both sides and 1.125Gh.

I can't find a link. Do you have one?

Thnx!

Noctua
http://www.amazon.com/Bearing-NF-F12-iPPC-3000-PWM/dp/B00KFCRATC
this is prime-fast shipping, only 6 left.
one from platinum micro is on the bottom right of the same page ($24.5, maybe slower shipping)

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: Phosphorous on January 14, 2015, 05:30:48 PM

Just got my Batch 4 S5's. Bitmain is now shipping using foam rather than the inflated tubes/bags. First thing I did was install the Nocturna fan mentioned earlier in this thread. Best money ever spent! Completely tolerable now. After 70 minutes, running 61deg on both sides and 1.125Gh.

I can't find a link. Do you have one?

Thnx!

Phosphorous

hero member

Activity: 556

Merit: 500

Just got my Batch 4 S5's. Bitmain is now shipping using foam rather than the inflated tubes/bags. First thing I did was install the Nocturna fan mentioned earlier in this thread. Best money ever spent! Completely tolerable now. After 70 minutes, running 61deg on both sides and 1.125Gh.

MyRig

donator

Activity: 792

Merit: 510

[email protected]

Great to hear it is working for you!!

Happy Hashing !

Quote from: ATCkit on January 14, 2015, 04:42:03 PM

UPS dropped off my S5 about 2 hrs ago. I've had running for about 1.45 hrs. Seems fine and avg hash is: 1.16 THS. A bit noisier than the S3s tho...as the fan has to run faster. I installed the miner monitor which Bitmain mentioned above. Nice tool

ATCkit

hero member

Activity: 786

Merit: 1000

UPS dropped off my S5 about 2 hrs ago. I've had running for about 1.45 hrs. Seems fine and avg hash is: 1.16 THS. A bit noisier than the S3s tho...as the fan has to run faster. I installed the miner monitor which Bitmain mentioned above. Nice tool

ATCkit

hero member

Activity: 786

Merit: 1000

Quote from: pekatete on January 14, 2015, 03:11:05 PM

Quote from: fr4nkthetank on January 14, 2015, 03:02:11 PM

Just heads up

Hi,
really sorry, we cannot help you on it. there is no coupon for S5 and price is very low now:)

Best Regards

BITMAIN

What's the headsup refering to? Can't seem to find a reference to that ... but if it was a request for vouchers, I think the response is valid to a large extent.

he was replying to this post:

https://bitcointalksearch.org/topic/m.10153788

Stratobitz

legendary

Activity: 1022

Merit: 1010

I think they mean maybe they arent issuing new coupons... I cant imagine them not honoring coupons already issued.

The ones I have are good to 2/4/15.

Strato

Topic: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH - page 221. (Read 451266 times)